Terminal 没有这样的历史记录`

我正在设置一个新的环境，似乎遇到了SBT或Linux上的shell的问题，在这里，单击向上箭头而不是显示我以前运行的命令，它说：

没有这样的历史记录`

我使用ZSH作为shell，但是我在其他任何地方都没有看到这个问题，包括

sbt控制台

。我以为是配置了bindkey导致了这种情况，但我似乎找不到任何设置。在Bash中也会发生这种情况

下面是我从

zsh--sourcetrace

看到的输出：

+/etc/zshenv:1> <sourcetrace>
+/etc/zshrc:1> <sourcetrace>
+/home/mhicks/.zshrc:1> <sourcetrace>
+/home/mhicks/.cache/p10k-instant-prompt-mhicks.zsh:1> <sourcetrace>

[WARNING]: Console output during zsh initialization detected.

When using Powerlevel10k with instant prompt, console output during zsh
initialization may indicate issues.

You can:

  - Recommended: Change ~/.zshrc so that it does not perform console I/O
    after the instant prompt preamble. See the link below for details.

    * You will not see this error message again.
    * Zsh will start quickly and prompt will update smoothly.

  - Suppress this warning either by running p10k configure or by manually
    defining the following parameter:

      typeset -g POWERLEVEL9K_INSTANT_PROMPT=quiet

    * You will not see this error message again.
    * Zsh will start quickly but prompt will jump down after initialization.

  - Disable instant prompt either by running p10k configure or by manually
    defining the following parameter:

      typeset -g POWERLEVEL9K_INSTANT_PROMPT=off

    * You will not see this error message again.
    * Zsh will start slowly.

  - Do nothing.

    * You will see this error message every time you start zsh.
    * Zsh will start quickly but prompt will jump down after initialization.

For details, see:
https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt

-- console output produced during zsh initialization follows --

+/home/mhicks/.oh-my-zsh/custom/themes/powerlevel10k/gitstatus/gitstatus.plugin.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/oh-my-zsh.sh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/tools/check_for_upgrade.sh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/cache/.zsh-update:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/compfix.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/bzr.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/clipboard.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/cli.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/compfix.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/completion.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/correction.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/diagnostics.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/directories.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/functions.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/git.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/grep.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/cache/grep-alias:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/history.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/key-bindings.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/misc.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/nvm.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/prompt_info_functions.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/spectrum.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/termsupport.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/lib/theme-and-appearance.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/plugins/git/git.plugin.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/custom/example.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/custom/themes/powerlevel10k/powerlevel10k.zsh-theme:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/custom/themes/powerlevel10k/internal/p10k.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/custom/themes/powerlevel10k/internal/configure.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/custom/themes/powerlevel10k/internal/worker.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/custom/themes/powerlevel10k/internal/parser.zsh:1> <sourcetrace>
+/home/mhicks/.oh-my-zsh/custom/themes/powerlevel10k/internal/icons.zsh:1> <sourcetrace>
+/home/mhicks/.sdkman/bin/sdkman-init.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/etc/config:1> <sourcetrace>
+/home/mhicks/.sdkman/etc/config:1> <sourcetrace>
+/home/mhicks/.sdkman/etc/config:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-version.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-update.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-config.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-help.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-cache.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-broadcast.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-install.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-availability.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-upgrade.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-env-helpers.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-utils.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-uninstall.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-offline.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-use.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-selfupdate.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-list.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-current.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-main.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-home.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-default.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-env.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-flush.sh:1> <sourcetrace>
+/home/mhicks/.sdkman/src/sdkman-path-helpers.sh:1> <sourcetrace>
+/home/mhicks/.nvm/nvm.sh:1> <sourcetrace>
+/home/mhicks/.nvm/bash_completion:1> <sourcetrace>
+/home/mhicks/.zcompdump:1> <sourcetrace>
+/home/mhicks/.p10k.zsh:1> <sourcetrace>

+/etc/zshenv:1>
+/etc/zshrc:1>
+/home/mhicks/.zshrc:1>
+/home/mhicks/.cache/p10k即时提示mhicks.zsh:1>
[警告]：在zsh初始化期间检测到控制台输出。
使用带即时提示的Powerlevel10k时，在zsh期间控制台输出
初始化可能表明存在问题。
你可以：
-建议：更改~/.zshrc，使其不执行控制台I/O
在即时提示序言之后。有关详细信息，请参阅下面的链接。
*您将不会再次看到此错误消息。
*Zsh将快速启动，提示符将顺利更新。
-通过运行p10k configure或手动禁用此警告
定义以下参数：
排版-g POWERLEVEL9K_即时提示=安静
*您将不会再次看到此错误消息。
*Zsh将快速启动，但初始化后提示符将跳下。
-通过运行p10k配置或手动禁用即时提示
定义以下参数：
排版-g POWERLEVEL9K\u即时提示=关闭
*您将不会再次看到此错误消息。
*Zsh将缓慢启动。
-什么也不做。
*每次启动zsh时都会看到此错误消息。
*Zsh将快速启动，但初始化后提示符将跳下。
有关详细信息，请参阅：
https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-提示
--在zsh初始化期间生成的控制台输出如下--
+/home/mhicks/.oh my zsh/custom/themes/powerlevel10k/gitstatus/gitstatus.plugin.zsh:1>
+/home/mhicks/.oh my zsh/oh my zsh.sh:1>
+/home/mhicks/.oh my zsh/tools/check\u\u\u升级。sh:1>
+/home/mhicks/.oh my zsh/cache/.zsh更新：1>
+/home/mhicks/.oh my zsh/lib/compfix.zsh:1>
+/home/mhicks/.oh my zsh/lib/bzr.zsh:1>
+/home/mhicks/.oh my zsh/lib/clipboard.zsh:1>
+/home/mhicks/.oh my zsh/lib/cli.zsh:1>
+/home/mhicks/.oh my zsh/lib/compfix.zsh:1>
+/home/mhicks/.oh my zsh/lib/completion.zsh:1>
+/home/mhicks/.oh my zsh/lib/correction.zsh:1>
+/home/mhicks/.oh my zsh/lib/diagnostics.zsh:1>
+/home/mhicks/.oh my zsh/lib/directories.zsh:1>
+/home/mhicks/.oh my zsh/lib/functions.zsh:1>
+/home/mhicks/.oh my zsh/lib/git.zsh:1>
+/home/mhicks/.oh my zsh/lib/grep.zsh:1>
+/home/mhicks/.oh my zsh/cache/grep别名：1>
+/home/mhicks/.oh my zsh/lib/history.zsh:1>
+/home/mhicks/.oh my zsh/lib/key bindings.zsh:1>
+/home/mhicks/.oh my zsh/lib/misc.zsh:1>
+/home/mhicks/.oh my zsh/lib/nvm.zsh:1>
+/home/mhicks/.oh my zsh/lib/prompt\u info\u functions.zsh:1>
+/home/mhicks/.oh my zsh/lib/spectrum.zsh:1>
+/home/mhicks/.oh my zsh/lib/termsupport.zsh:1>
+/home/mhicks/。噢，我的zsh/lib/主题和外观。zsh:1>
+/home/mhicks/.oh my zsh/plugins/git/git.plugin.zsh:1>
+/home/mhicks/.oh my zsh/custom/example.zsh:1>
+/home/mhicks/.oh my zsh/custom/themes/powerlevel10k/powerlevel10k.zsh主题：1>
+/home/mhicks/.oh my zsh/custom/themes/powerlevel10k/internal/p10k.zsh:1>
+/home/mhicks/.oh my zsh/custom/themes/powerlevel10k/internal/configure.zsh:1>
+/home/mhicks/.oh my zsh/custom/themes/powerlevel10k/internal/worker.zsh:1>
+/home/mhicks/.oh my zsh/custom/themes/powerlevel10k/internal/parser.zsh:1>
+/home/mhicks/.oh my zsh/custom/themes/powerlevel10k/internal/icons.zsh:1>
+/home/mhicks/.sdkman/bin/sdkman init.sh:1>
+/home/mhicks/.sdkman/etc/config:1>
+/home/mhicks/.sdkman/etc/config:1>
+/home/mhicks/.sdkman/etc/config:1>
+/home/mhicks/.sdkman/src/sdkman version.sh:1>
+/home/mhicks/.sdkman/src/sdkman update.sh:1>
+/home/mhicks/.sdkman/src/sdkman config.sh:1>
+/home/mhicks/.sdkman/src/sdkman help.sh:1>
+/home/mhicks/.sdkman/src/sdkman cache.sh:1>
+/home/mhicks/.sdkman/src/sdkman broadcast.sh:1>
+/home/mhicks/.sdkman/src/sdkman install.sh:1>
+/home/mhicks/.sdkman/src/sdkman可用性。sh:1>
+/home/mhicks/.sdkman/src/sdkman upgrade.sh:1>
+/home/mhicks/.sdkman/src/sdkman env helpers.sh:1>
+/home/mhicks/.sdkman/src/sdkman utils.sh:1>
+/home/mhicks/.sdkman/src/sdkman uninstall.sh:1>
+/home/mhicks/.sdkman/src/sdkman offline.sh:1>
+/home/mhicks/.sdkman/src/sdkman use.sh:1>
+/home/mhicks/.sdkman/src/sdkman selfupdate.sh:1>
+/home/mhicks/.sdkman/src/sdkman list.sh:1>
+/home/mhicks/.sdkman/src/sdkman current.sh:1>
+/home/mhicks/.sdkman/src/sdkman main.sh:1>
+/home/mhicks/.sdkman/src/sdkman home.sh:1>
+/home/mhicks/.sdkman/src/sdkman default.sh:1>
+/home/mhicks/.sdkman/src/sdkman env.sh:1>
+/home/mhicks/.sdkman/src/sdkman flush.sh:1>
+/home/mhicks/.sdkman/src/sdkman路径助手。sh:1>
+/home/mhicks/.nvm/nvm.sh:1>
+/home/mhicks/.nvm/bash_完成：1>
+/home/mhicks/.zcompdump:1>
+/home/mhicks/.p10k.zsh:1>

---

编辑：确认，这确实发生在Bash中，所以我认为完全擦除我的用户目录并重新开始可能会修复它。唉，我正在做的事情似乎导致了这种情况的持续存在，或者是某种服务在运行。我创建了一个新的主目录，安装了Ohmyzh，配置了powerlevel10k，安装了sdkman，安装了SBT，安装了Java，然后验证了这仍然在发生。

您在Zsh中看到的输出意味着↑ 密钥绑定到不存在的小部件。你可以这样做：

键入

bindkey'

按ControlV

压榨↑.

键入

”

并按Enter键

现在，您应该在终端中看到以下两个输出之一（提示为

%

）：

%bindkey'^[[A]
bindkey'^[[A'以前的历史记录
%

---

• [sbt]相关文章推荐

• 为多模块SBT项目中的子模块执行packageBin任务 sbt
• Sbt &引用；出版「；到本地maven repo只创建scaladoc jar？ sbt
• 使用sbt原生打包机和bintray sbt通过sbt将deb发布到bintray sbt
• Sbt 如何使用'；%%'；在Build.scala文件中 sbt
• 如何仅将专用Maven存储库用于SBT？ sbt
• 分叉“；sbt运行与维护&引用； sbt
• 无法解析发布到maven repo的SBT插件 sbt
• Sbt 如何设置默认的Scala版本？ sbt
• sbt程序集未发布fat jar sbt
• Sbt 为什么publish和publishLocal的目录布局不同 sbt
• 为什么项目中有两个不同版本的sbt sbt
• 覆盖sbt任务中的测试选项 sbt

---

• 随机文章推荐

• Configuration 我是否可以为一个hgwebdir提供的所有Mercurial回购设置allow_push Global？ configurationmercurial
• Configuration Scala中的处理属性 configurationscalaproperties
• Configuration 我们应该使用什么配置的JBoss？web、标准、默认？ configurationjboss
• Configuration Weblogic/EjbGen：工作管理器配置 configurationweblogic
• Configuration 如何将序列分配给TLA+；配置文件？ configuration
• Configuration 确保在不同环境中正确配置 configuration
• Configuration 是否有任何以功能性语言（如Haskell、erlang等）编写的接近生产的系统配置管理框架？ configuration
• Configuration Log4j、图案布局、类别和类别 configurationlog4j
• Configuration Symfony 2配置文件类型 configurationsymfony
• Configuration FUELPHP-更改“的名称”；“公众”；文件夹 configurationdirectory
• Configuration 当用户试图访问受保护的目录时，如何发送404？ configurationapache2
• Configuration 使用HtmlUnit手动将文件pac添加到代理 configurationproxy
• Configuration HTML内部JavaScript的Atom JSHint configurationnpmatom-editor
• Configuration Odoo是否将加载项路径指定为模式？ configurationpathodoo
• Configuration 升华文本3新文件的默认文件类型 configurationsublimetext3
• Configuration 如何指定非平凡元数据来驱动构建系统？ configuration
• Configuration getstoreconfig和getstoreconfigflag之间有什么区别？ configuration
• Configuration apache geode 9.0.3定位器找不到JMX管理器 configuration
• Configuration Spring批处理作业参数 configurationspring-batch
• Configuration 在Xampp窗口上启用LDAP configurationxamppldap