Winscp net WinSCP会话。ExecuteCommand（）正在超时
我正在用WinSCP运行一个远程脚本，这会导致终端响应之间的长时间等待 我使用session.OutputDataReceived（）事件获取会话的所有中间输出，直到远程主机静默超过30秒，然后继续 这是OutputDataReceived捕获的与远程主机的对话：Winscp net WinSCP会话。ExecuteCommand（）正在超时,winscp-net,Winscp Net,我正在用WinSCP运行一个远程脚本，这会导致终端响应之间的长时间等待 我使用session.OutputDataReceived（）事件获取会话的所有中间输出，直到远程主机静默超过30秒，然后继续 这是OutputDataReceived捕获的与远程主机的对话： 20161123.144738.342 <ip> : winscp> call ./AAA1504v1_1_7.run --load 20161123.144743.646 <ip> : Searchin
20161123.144738.342 <ip> : winscp> call ./AAA1504v1_1_7.run --load
20161123.144743.646 <ip> : Searching for firmware
20161123.144743.650 <ip> : Validating firmware
20161123.144743.653 <ip> : Image:
20161123.144743.655 <ip> : Image version :1
20161123.144743.658 <ip> : Product :AAA 1504
20161123.144743.661 <ip> : Version :1.1.7
20161123.144743.664 <ip> : AAA image:
20161123.144743.667 <ip> : Version :1.1.7
20161123.144743.670 <ip> : Checksum :0x6386
20161123.144743.672 <ip> : Length :100329
20161123.144743.675 <ip> : date :Tue May 17 13:49:54 2016
20161123.144743.677 <ip> : name :'AAA1504v117.bin'
20161123.144743.678 <ip> : MPD image:
20161123.144748.638 <ip> : Version :1.1.9
20161123.144748.640 <ip> : Checksum :0x8D29
20161123.144748.643 <ip> : Length :2295808
20161123.144748.646 <ip> : A393B7ED1E98D478D3DC7A567EAD7A0E valid
20161123.144748.648 <ip> : Valid firmware
20161123.144806.731 <ip> : Updating AAA.........success
20161123.144845.105 <ip> : Host is not communicating for more than 15 seconds.
20161123.144845.108 <ip> : Still waiting...
20161123.144845.110 <ip> : Note: If the problem repeats, try turning off 'Optimize connection buffer size'.
20161123.144845.113 <ip> : Warning: Aborting this operation will close connection!
20161128.144807.559 [OutputDataReceived] Updating AAA.........success
20161128.144807.559 Firmware Update complete
20161128.144846.496 [OutputDataReceived] Host is not communicating for more than 15 seconds.
20161128.144846.497 [OutputDataReceived] Still waiting...
20161128.144846.497 [OutputDataReceived] Note: If the problem repeats, try turning off 'Optimize connection buffer size'.
20161128.144846.497 [OutputDataReceived] Warning: Aborting this operation will close connection!
20161128.144946.029 [OutputDataReceived] (A)bort (60 s): Abort
20161128.144946.031 [OutputDataReceived] Terminated by user.
20161128.144946.033 [OutputDataReceived] Session 'root@xxx.xx.xxx.229' closed.
20161128.144946.034 [OutputDataReceived] No session.
20161128.144011.321 [OutputDataReceived] Updating AAA.........success
20161128.144011.322 Firmware Update complete
20161128.144111.530 [catch2] Timeout waiting for WinSCP to respond
. 2016-11-28 14:46:15.142 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.142 WinSCP Version 5.9.2 (Build 6958) (OS 6.1.7601 Service Pack 1 - Windows 7 Professional)
. 2016-11-28 14:46:15.142 Configuration: nul
. 2016-11-28 14:46:15.142 Log level: Normal
. 2016-11-28 14:46:15.142 Local account: ....\......
. 2016-11-28 14:46:15.142 Working directory: C:\Program Files (x86)\WinSCP
. 2016-11-28 14:46:15.142 Process ID: 40352
. 2016-11-28 14:46:15.143 Command-line: "C:\Program Files (x86)\WinSCP\winscp.exe" /xmllog="C:\Users\........\AppData\Local\Temp\wscpA5D8.0139A378.tmp" /xmlgroups /xmllogrequired /nointeractiveinput /dotnet=592 /ini=nul /log="C:\#support\winscp.dbg" /console /consoleinstance=_42456_30762424_206
. 2016-11-28 14:46:15.143 Time zone: Current: GMT-6, Standard: GMT-6 (Central Standard Time), DST: GMT-5 (Central Daylight Time), DST Start: 3/13/2016, DST End: 11/6/2016
. 2016-11-28 14:46:15.143 Login time: Monday, November 28, 2016 2:46:15 PM
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.143 Script: Retrospectively logging previous script records:
> 2016-11-28 14:46:15.143 Script: option batch on
< 2016-11-28 14:46:15.143 Script: batch on
< 2016-11-28 14:46:15.143 Script: reconnecttime 120
> 2016-11-28 14:46:15.143 Script: option confirm off
< 2016-11-28 14:46:15.143 Script: confirm off
> 2016-11-28 14:46:15.143 Script: option reconnecttime 120
< 2016-11-28 14:46:15.143 Script: reconnecttime 120
> 2016-11-28 14:46:15.143 Script: open scp://root:***@xxx.xx.xxx.229 -hostkey="ssh-rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24" -timeout=15 -rawsettings AuthGSSAPI="1" Cipher="aes,blowfish,3des,chacha20,WARN,arcfour,des" KEX="ecdh,dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,rsa,WARN"
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.143 Session name: root@xxx.xx.xxx.229 (Ad-Hoc site)
. 2016-11-28 14:46:15.143 Host name: xxx.xx.xxx.229 (Port: 22)
. 2016-11-28 14:46:15.143 User name: root (Password: Yes, Key file: No)
. 2016-11-28 14:46:15.143 Tunnel: No
. 2016-11-28 14:46:15.143 Transfer Protocol: SCP
. 2016-11-28 14:46:15.143 Ping type: Off, Ping interval: 30 sec; Timeout: 15 sec
. 2016-11-28 14:46:15.143 Disable Nagle: No
. 2016-11-28 14:46:15.143 Proxy: None
. 2016-11-28 14:46:15.143 Send buffer: 262144
. 2016-11-28 14:46:15.143 SSH protocol version: 2; Compression: No
. 2016-11-28 14:46:15.143 Bypass authentication: No
. 2016-11-28 14:46:15.143 Try agent: Yes; Agent forwarding: No; TIS/CryptoCard: No; KI: Yes; GSSAPI: Yes
. 2016-11-28 14:46:15.143 GSSAPI: Forwarding: No
. 2016-11-28 14:46:15.143 Ciphers: aes,blowfish,3des,chacha20,WARN,arcfour,des; Ssh2DES: No
. 2016-11-28 14:46:15.143 KEX: ecdh,dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,rsa,WARN
. 2016-11-28 14:46:15.143 SSH Bugs: Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto
. 2016-11-28 14:46:15.143 Simple channel: Yes
. 2016-11-28 14:46:15.143 Return code variable: Autodetect; Lookup user groups: Auto
. 2016-11-28 14:46:15.143 Shell: default
. 2016-11-28 14:46:15.143 EOL: LF, UTF: Auto
. 2016-11-28 14:46:15.143 Clear aliases: Yes, Unset nat.vars: Yes, Resolve symlinks: Yes; Follow directory symlinks: No
. 2016-11-28 14:46:15.143 LS: ls -la, Ign LS warn: Yes, Scp1 Comp: No
. 2016-11-28 14:46:15.143 Local directory: default, Remote directory: home, Update: Yes, Cache: Yes
. 2016-11-28 14:46:15.143 Cache directory changes: Yes, Permanent: Yes
. 2016-11-28 14:46:15.143 Recycle bin: Delete to: No, Overwritten to: No, Bin path:
. 2016-11-28 14:46:15.143 DST mode: Unix;Timezone offset: 0h 0m
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.144 Looking up host "xxx.xx.xxx.229" for SSH connection
. 2016-11-28 14:46:15.144 Connecting to xxx.xx.xxx.229 port 22
. 2016-11-28 14:46:15.209 We claim version: SSH-2.0-WinSCP_release_5.9.2
. 2016-11-28 14:46:15.531 Server version: SSH-2.0-dropbear_0.52
. 2016-11-28 14:46:15.531 We believe remote version has SSH-2 channel request bug
. 2016-11-28 14:46:15.531 Using SSH protocol version 2
. 2016-11-28 14:46:15.531 Have a known host key of type rsa2
. 2016-11-28 14:46:15.600 Using Diffie-Hellman with standard group "group1"
. 2016-11-28 14:46:15.600 Doing Diffie-Hellman key exchange with hash SHA-1
. 2016-11-28 14:46:18.528 Host key fingerprint is:
. 2016-11-28 14:46:18.528 ssh-rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24
. 2016-11-28 14:46:18.528 Verifying host key rsa2 0x10001,0x8655eaba5dcb7994 985cb3d6ebeca273 368ca5dce0996f2a 215340bc46dadc4e 707e0570ae0a9475 99998dbf78b0f313 0267082a5e2b7c92 0edb8494ca9d6b0c 95af8f39f05b2333 cd2dc78fb5787fef 219226c936158e39 fb408056a575d022 c024a55b92bcdb4b 09c3d638a1bc46ba f6912c03c78603fd c034dc7e0b20beda b967 with fingerprint ssh-rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24
. 2016-11-28 14:46:18.529 Host key matches configured key
. 2016-11-28 14:46:18.529 Initialised AES-256 SDCTR client->server encryption
. 2016-11-28 14:46:18.529 Initialised HMAC-SHA1 client->server MAC algorithm
. 2016-11-28 14:46:18.593 Initialised AES-256 SDCTR server->client encryption
. 2016-11-28 14:46:18.593 Initialised HMAC-SHA1 server->client MAC algorithm
! 2016-11-28 14:46:18.661 Using username "root".
. 2016-11-28 14:46:18.730 Server offered these authentication methods: publickey,password
. 2016-11-28 14:46:18.730 Prompt (password, "SSH password", <no instructions>, "&Password: ")
. 2016-11-28 14:46:18.730 Using stored password.
. 2016-11-28 14:46:18.731 Sent password
. 2016-11-28 14:46:18.954 Access granted
. 2016-11-28 14:46:18.954 Opening session as main channel
. 2016-11-28 14:46:19.025 Opened main channel
. 2016-11-28 14:46:19.213 Started a shell/command
. 2016-11-28 14:46:19.213 --------------------------------------------------------------------------
. 2016-11-28 14:46:19.213 Using SCP protocol.
. 2016-11-28 14:46:19.214 Doing startup conversation with host.
. 2016-11-28 14:46:19.214 Skipping host startup message (if any).
> 2016-11-28 14:46:19.214 echo "WinSCP: this is end-of-file:0"
< 2016-11-28 14:46:19.286 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:19.287 Detecting variable containing return code of last command.
. 2016-11-28 14:46:19.287 Trying "$status".
> 2016-11-28 14:46:19.287 echo "$status" ; echo "WinSCP: this is end-of-file:0"
< 2016-11-28 14:46:19.615 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:19.615 The response is not numerical exit code
. 2016-11-28 14:46:19.615 Trying "$?".
> 2016-11-28 14:46:19.615 echo "$?" ; echo "WinSCP: this is end-of-file:0"
< 2016-11-28 14:46:19.687 0
< 2016-11-28 14:46:19.949 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:19.949 Return code variable "$?" selected.
> 2016-11-28 14:46:19.949 printenv LANG ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:20.036 sh: can't exec 'printenv': No such file or directory
< 2016-11-28 14:46:20.301 WinSCP: this is end-of-file:1
. 2016-11-28 14:46:20.301 We will not use UTF-8
. 2016-11-28 14:46:20.301 Clearing all aliases.
> 2016-11-28 14:46:20.301 unalias "ls" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:20.380 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:20.644 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:20.645 unalias "echo" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:20.720 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:20.987 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:20.987 unalias "pwd" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:21.064 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:21.330 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:21.330 unalias "cd" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:21.404 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:21.664 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:21.664 unalias "groups" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:21.741 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:22.007 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:22.008 unalias "scp" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:22.083 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:22.350 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:22.350 unalias "rm" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:22.425 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:22.684 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:22.684 unalias "mv" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:22.759 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:23.027 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:23.027 unalias "mkdir" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:23.102 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:23.370 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:23.370 unalias "chmod" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:23.444 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:23.704 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:23.704 unalias "chgrp" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:23.780 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:24.047 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:24.047 unalias "chown" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:24.125 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:24.390 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:24.390 unalias "unset" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:24.464 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:24.730 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:24.730 unalias "unalias" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:24.805 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:25.069 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:25.069 unalias "ln" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:25.144 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:25.409 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:25.409 unalias "cp" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:25.484 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:25.749 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:25.749 unalias "printenv" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:25.824 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:26.090 WinSCP: this is end-of-file:1
. 2016-11-28 14:46:26.090 Clearing national user variables.
> 2016-11-28 14:46:26.090 unset "LANG" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.173 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.173 unset "LANGUAGE" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.246 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.246 unset "LC_CTYPE" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.320 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.320 unset "LC_COLLATE" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.394 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.394 unset "LC_MONETARY" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.467 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.467 unset "LC_NUMERIC" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.540 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.540 unset "LC_TIME" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.615 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.615 unset "LC_MESSAGES" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.688 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.688 unset "LC_ALL" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.761 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.761 unset "HUMAN_BLOCKS" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.835 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:26.835 Looking up groups and users.
> 2016-11-28 14:46:26.835 groups ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:26.915 sh: can't exec 'groups': No such file or directory
< 2016-11-28 14:46:27.174 WinSCP: this is end-of-file:1
. 2016-11-28 14:46:27.174 Getting current directory name.
> 2016-11-28 14:46:27.174 pwd ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:27.247 /
< 2016-11-28 14:46:27.247 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:27.247 Startup conversation with host finished.
< 2016-11-28 14:46:27.247 Script: Active session: [1] root@xxx.xx.xxx.229
> 2016-11-28 14:46:27.940 Script: pwd
< 2016-11-28 14:46:27.940 Script: /
> 2016-11-28 14:46:27.999 Script: put -nopermissions -preservetime -transfer="binary" -- "C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run" "/var/tmp/*"
. 2016-11-28 14:46:28.000 Copying 1 files/directories to remote directory "/var/tmp/"
. 2016-11-28 14:46:28.000 PrTime: Yes; PrRO: No; Rght: rw-r--r--; PrR: No (No); FnCs: N; RIC: 0100; Resume: S (102400); CalcS: Yes; Mask: *
. 2016-11-28 14:46:28.000 TM: B; ClAr: No; RemEOF: No; RemBOM: No; CPS: 0; NewerOnly: No; InclM: ; ResumeL: 0
. 2016-11-28 14:46:28.000 AscM: *.*html; *.htm; *.txt; *.php; *.php3; *.cgi; *.c; *.cpp; *.h; *.pas; *.bas; *.tex; *.pl; *.js; .htaccess; *.xtml; *.css; *.cfg; *.ini; *.sh; *.xml
> 2016-11-28 14:46:28.000 echo "WinSCP: this is begin-of-file" ; scp -r -d -t "/var/tmp" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:28.114 WinSCP: this is begin-of-file
. 2016-11-28 14:46:28.374 SCP remote side confirmation (0)
. 2016-11-28 14:46:28.374 File: "C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run"
. 2016-11-28 14:46:28.375 File: 'C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run' [2016-11-22T18:08:47.884Z] [2449208]
. 2016-11-28 14:46:28.381 Copying "C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run" to remote directory started.
. 2016-11-28 14:46:28.381 Binary transfer mode selected.
> 2016-11-28 14:46:28.382 T1479838127 0 1479838174 0
. 2016-11-28 14:46:28.455 SCP remote side confirmation (0)
> 2016-11-28 14:46:28.455 C0644 2449208 AAA1504v1_1_7.run
. 2016-11-28 14:46:28.531 SCP remote side confirmation (0)
. 2016-11-28 14:46:28.531 Sending BINARY data (first block, 32768 bytes)
. 2016-11-28 14:47:34.788 Sending NULL.
. 2016-11-28 14:47:36.266 SCP remote side confirmation (0)
. 2016-11-28 14:47:36.266 Transfer done: 'C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run' [2449208]
. 2016-11-28 14:47:36.266 Copying "C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run" to remote directory finished.
> 2016-11-28 14:47:36.267 E
. 2016-11-28 14:47:36.341 SCP remote side confirmation (0)
< 2016-11-28 14:47:36.341 WinSCP: this is end-of-file:0
> 2016-11-28 14:47:36.789 Script: call cd /tmp
. 2016-11-28 14:47:36.789 Executing user defined command.
> 2016-11-28 14:47:36.789 cd /tmp ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:36.865 WinSCP: this is end-of-file:0
. 2016-11-28 14:47:36.865 Getting current directory name.
> 2016-11-28 14:47:36.865 pwd ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:36.938 /var/tmp
< 2016-11-28 14:47:36.938 WinSCP: this is end-of-file:0
> 2016-11-28 14:47:36.966 Script: call chmod 777 *.run
. 2016-11-28 14:47:36.966 Executing user defined command.
> 2016-11-28 14:47:36.966 chmod 777 *.run ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:37.115 WinSCP: this is end-of-file:0
. 2016-11-28 14:47:37.115 Getting current directory name.
> 2016-11-28 14:47:37.116 pwd ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:37.189 /var/tmp
< 2016-11-28 14:47:37.189 WinSCP: this is end-of-file:0
> 2016-11-28 14:47:37.369 Script: call ./AAA1504v1_1_7.run --load
. 2016-11-28 14:47:37.369 Executing user defined command.
> 2016-11-28 14:47:37.369 ./AAA1504v1_1_7.run --load ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:42.682 Script: Searching for firmware
< 2016-11-28 14:47:42.683 Searching for firmware
< 2016-11-28 14:47:42.683 Script: Validating firmware
< 2016-11-28 14:47:42.683 Validating firmware
< 2016-11-28 14:47:42.683 Script: Image:
< 2016-11-28 14:47:42.683 Image:
< 2016-11-28 14:47:42.683 Script: Image version :1
< 2016-11-28 14:47:42.683 Image version :1
< 2016-11-28 14:47:42.683 Script: Product :AAA 1504
< 2016-11-28 14:47:42.684 Product :AAA 1504
< 2016-11-28 14:47:42.684 Script: Version :1.1.7
< 2016-11-28 14:47:42.684 Version :1.1.7
< 2016-11-28 14:47:42.684 Script: AAA image:
< 2016-11-28 14:47:42.684 AAA image:
< 2016-11-28 14:47:42.684 Script: Version :1.1.7
< 2016-11-28 14:47:42.684 Version :1.1.7
< 2016-11-28 14:47:42.684 Script: Checksum :0x6386
< 2016-11-28 14:47:42.685 Checksum :0x6386
< 2016-11-28 14:47:42.685 Script: Length :100329
< 2016-11-28 14:47:42.688 Length :100329
< 2016-11-28 14:47:42.688 Script: date :Tue May 17 13:49:54 2016
< 2016-11-28 14:47:42.688 date :Tue May 17 13:49:54 2016
< 2016-11-28 14:47:42.688 Script: name :'AAA1504v117.bin'
< 2016-11-28 14:47:42.689 name :'AAA1504v117.bin'
< 2016-11-28 14:47:42.689 Script: MPD image:
< 2016-11-28 14:47:42.689 MPD image:
< 2016-11-28 14:47:49.192 Script: Version :1.1.9
< 2016-11-28 14:47:49.193 Version :1.1.9
< 2016-11-28 14:47:49.193 Script: Checksum :0x8D29
< 2016-11-28 14:47:49.193 Checksum :0x8D29
< 2016-11-28 14:47:49.193 Script: Length :2295808
< 2016-11-28 14:47:49.194 Length :2295808
< 2016-11-28 14:47:49.194 Script: A393B7ED1E98D478D3DC7A567EAD7A0E valid
< 2016-11-28 14:47:49.195 A393B7ED1E98D478D3DC7A567EAD7A0E valid
< 2016-11-28 14:47:49.195 Script: Valid firmware
< 2016-11-28 14:47:49.195 Valid firmware
< 2016-11-28 14:48:07.559 Script: Updating AAA.........success
< 2016-11-28 14:48:07.559 Updating AAA.........success
. 2016-11-28 14:48:46.496 Waiting for data timed out, asking user what to do.
. 2016-11-28 14:48:46.496 Asking user:
. 2016-11-28 14:48:46.496 **Host is not communicating for 15 seconds.
. 2016-11-28 14:48:46.496
. 2016-11-28 14:48:46.496 Wait for another 15 seconds?** ()
< 2016-11-28 14:48:46.496 Script: Host is not communicating for more than 15 seconds.
< 2016-11-28 14:48:46.496 Still waiting...
< 2016-11-28 14:48:46.496 Note: If the problem repeats, try turning off 'Optimize connection buffer size'.
< 2016-11-28 14:48:46.496 Warning: Aborting this operation will close connection!
. 2016-11-28 14:49:46.029 Attempt to close connection due to fatal exception:
* 2016-11-28 14:49:46.029 **Terminated by user.**
. 2016-11-28 14:49:46.029 Closing connection.
. 2016-11-28 14:49:46.029 Sending special code: 12
. 2016-11-28 14:49:46.030 Sent EOF message
< 2016-11-28 14:49:46.030 Script: Terminated by user.
。2016-11-28 14:46:15.142 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.142 WinSCP版本5.9.2（版本6958）（操作系统6.1.7601 Service Pack 1-Windows 7 Professional）
. 2016-11-28 14:46:15.142配置：nul
. 2016-11-28 14:46:15.142日志级别：正常
. 2016-11-28 14:46:15.142本地账户：…\。。。。。。
. 2016-11-28 14:46:15.142工作目录：C:\Program Files（x86）\WinSCP
. 2016-11-28 14:46:15.142过程ID:40352
. 2016-11-28 14:46:15.143命令行：“C:\Program Files（x86）\WinSCP\WinSCP.exe”/xmllog=“C:\Users\…..\AppData\Local\Temp\wscpA5D8.0139A378.tmp”/xmlgroups/xmllogrequired/nointeractiveinput/dotnet=592/ini=nul/log=“C:\\支持\WinSCP.dbg”/console/console/consoleinstance=\U 42456\U 30762424\U 206
. 2016-11-28 14:46:15.143时区：当前：格林尼治标准时间：格林尼治标准时间：格林尼治标准时间-6（中央标准时间），夏令时：格林尼治标准时间-5（中央夏时制），夏令时开始时间：2016年3月13日，夏令时结束时间：2016年11月6日
. 2016-11-28 14:46:15.143登录时间：2016年11月28日星期一下午2:46:15
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.143脚本：回顾性记录以前的脚本记录：
>2016-11-28 14:46:15.143脚本：选项批次打开
<2016-11-28 14:46:15.143脚本：批量打开
<2016-11-28 14:46:15.143脚本：重新连接时间120
>2016-11-28 14:46:15.143脚本：选项确认关闭
<2016-11-28 14:46:15.143脚本：确认关闭
>2016-11-28 14:46:15.143脚本：选项重新连接时间120
<2016-11-28 14:46:15.143脚本：重新连接时间120
>2016-11-28 14:46:15.143脚本：打开scp://root:***@xxx.xx.xxx.229-hostkey=“ssh rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24”-timeout=15-rawsettings AuthGSSAPI=“1”Cipher=“aes，河豚，3des，chacha20，WARN，arcfour，des“KEX=”ecdh，dh-gex-sha1，dh-group14-sha1，dh-group1，rsa，WARN”
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.143会议名称：root@xxx.xx.xxx.229（特设网站）
. 2016-11-28 14:46:15.143主机名：xxx.xx.xxx.229（端口：22）
. 2016-11-28 14:46:15.143用户名：root（密码：是，密钥文件：否）
. 2016-11-28 14:46:15.143隧道编号
. 2016-11-28 14:46:15.143传输协议：SCP
. 2016-11-28 14:46:15.143 Ping类型：关闭，Ping间隔：30秒；超时：15秒
. 2016-11-28 14:46:15.143禁用名称：否
. 2016-11-28 14:46:15.143代理人：无
. 2016-11-28 14:46:15.143发送缓冲区：262144
. 2016-11-28 14:46:15.143 SSH协议版本：2；压缩：没有
. 2016-11-28 14:46:15.143旁路认证：否
. 2016-11-28 14:46:15.143审判代理人：是；代理转发：否；TIS/加密卡：否；基：是的；GSSAPI：是的
. 2016-11-28 14:46:15.143 GSSAPI:转发：否
. 2016-11-28 14:46:15.143密码：aes、河豚、3des、chacha20、WARN、arcfour、des；没有
. 2016-11-28 14:46:15.143kex:ecdh、dh-gex-sha1、dh-group14-sha1、dh-group1-sha1、rsa、WARN
. 2016-11-28 14:46:15.143 SSH错误：自动，自动，自动，自动，自动，自动，自动，自动，自动
. 2016-11-28 14:46:15.143简单频道：是
. 2016-11-28 14:46:15.143返回码变量：自动检测；查找用户组：自动
. 2016-11-28 14:46:15.143壳牌：违约
. 2016-11-28 14:46:15.143下线：左前，右后：自动
. 2016-11-28 14:46:15.143清除别名：是，取消设置nat.vars：是，解析符号链接：是；跟踪目录符号链接：否
. 2016-11-28 14:46:15.143负载：负载-la，点火负载警告：是，Scp1组件：否
. 2016-11-28 14:46:15.143本地目录：默认，远程目录：主目录，更新：是，缓存：是
. 2016-11-28 14:46:15.143缓存目录更改：是，永久：是
. 2016-11-28 14:46:15.143回收站：删除到：否，覆盖到：否，回收站路径：
. 2016-11-28 14:46:15.143 DST模式：Unix；时区偏移：0小时0米
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.144查找SSH连接的主机“xxx.xx.xxx.229”
. 2016-11-28 14:46:15.144连接到xxx.xx.xxx.229端口22
. 2016-11-28 14:46:15.209我们声称版本：SSH-2.0-WinSCP_发行版_5.9.2
. 2016-11-28 14:46:15.531服务器版本：SSH-2.0-dropbear_0.52
. 2016-11-28 14:46:15.531我们认为远程版本存在SSH-2通道请求错误
. 2016-11-28 14:46:15.531使用SSH协议版本2
. 2016-11-28 14:46:15.531具有已知的rsa2类型主机密钥
. 2016-11-28 14:46:15.600使用Diffie Hellman和标准组“group1”
. 2016-11-28 14:46:15.600使用哈希SHA-1进行Diffie-Hellman密钥交换
. 2016-11-28 14:46:18.528主机密钥指纹是：
. 2016-11-28 14:46:18.528 ssh rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24
. 2016-11-28 14:46:18.528正在验证主机密钥rsa2 0x100001,0x8655eaba5dcb7994 985CB3D6EBECA27368CA5DCE0996F2A 215340bc46dadc4e 707e0570ae0a9475 99998dbf78b0f313 0267082A55E2B7C92 0edb8494ca9d6b0c 95af8f39f05b2333 cd2dc78fb5787fef 219226c936158e39 FB408056A55AE0A22 C024A55B920BC7B73807C07B7CF638B1967CF7指纹ssh rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24
. 2016-11-28 14:46:18.529主机密钥与配置的密钥匹配
. 2016-11-28 14:46:18.529初始化AES
. 2016-11-28 14:46:15.142 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.142 WinSCP Version 5.9.2 (Build 6958) (OS 6.1.7601 Service Pack 1 - Windows 7 Professional)
. 2016-11-28 14:46:15.142 Configuration: nul
. 2016-11-28 14:46:15.142 Log level: Normal
. 2016-11-28 14:46:15.142 Local account: ....\......
. 2016-11-28 14:46:15.142 Working directory: C:\Program Files (x86)\WinSCP
. 2016-11-28 14:46:15.142 Process ID: 40352
. 2016-11-28 14:46:15.143 Command-line: "C:\Program Files (x86)\WinSCP\winscp.exe" /xmllog="C:\Users\........\AppData\Local\Temp\wscpA5D8.0139A378.tmp" /xmlgroups /xmllogrequired /nointeractiveinput /dotnet=592 /ini=nul /log="C:\#support\winscp.dbg" /console /consoleinstance=_42456_30762424_206
. 2016-11-28 14:46:15.143 Time zone: Current: GMT-6, Standard: GMT-6 (Central Standard Time), DST: GMT-5 (Central Daylight Time), DST Start: 3/13/2016, DST End: 11/6/2016
. 2016-11-28 14:46:15.143 Login time: Monday, November 28, 2016 2:46:15 PM
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.143 Script: Retrospectively logging previous script records:
> 2016-11-28 14:46:15.143 Script: option batch on
< 2016-11-28 14:46:15.143 Script: batch on
< 2016-11-28 14:46:15.143 Script: reconnecttime 120
> 2016-11-28 14:46:15.143 Script: option confirm off
< 2016-11-28 14:46:15.143 Script: confirm off
> 2016-11-28 14:46:15.143 Script: option reconnecttime 120
< 2016-11-28 14:46:15.143 Script: reconnecttime 120
> 2016-11-28 14:46:15.143 Script: open scp://root:***@xxx.xx.xxx.229 -hostkey="ssh-rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24" -timeout=15 -rawsettings AuthGSSAPI="1" Cipher="aes,blowfish,3des,chacha20,WARN,arcfour,des" KEX="ecdh,dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,rsa,WARN"
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.143 Session name: root@xxx.xx.xxx.229 (Ad-Hoc site)
. 2016-11-28 14:46:15.143 Host name: xxx.xx.xxx.229 (Port: 22)
. 2016-11-28 14:46:15.143 User name: root (Password: Yes, Key file: No)
. 2016-11-28 14:46:15.143 Tunnel: No
. 2016-11-28 14:46:15.143 Transfer Protocol: SCP
. 2016-11-28 14:46:15.143 Ping type: Off, Ping interval: 30 sec; Timeout: 15 sec
. 2016-11-28 14:46:15.143 Disable Nagle: No
. 2016-11-28 14:46:15.143 Proxy: None
. 2016-11-28 14:46:15.143 Send buffer: 262144
. 2016-11-28 14:46:15.143 SSH protocol version: 2; Compression: No
. 2016-11-28 14:46:15.143 Bypass authentication: No
. 2016-11-28 14:46:15.143 Try agent: Yes; Agent forwarding: No; TIS/CryptoCard: No; KI: Yes; GSSAPI: Yes
. 2016-11-28 14:46:15.143 GSSAPI: Forwarding: No
. 2016-11-28 14:46:15.143 Ciphers: aes,blowfish,3des,chacha20,WARN,arcfour,des; Ssh2DES: No
. 2016-11-28 14:46:15.143 KEX: ecdh,dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,rsa,WARN
. 2016-11-28 14:46:15.143 SSH Bugs: Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto,Auto
. 2016-11-28 14:46:15.143 Simple channel: Yes
. 2016-11-28 14:46:15.143 Return code variable: Autodetect; Lookup user groups: Auto
. 2016-11-28 14:46:15.143 Shell: default
. 2016-11-28 14:46:15.143 EOL: LF, UTF: Auto
. 2016-11-28 14:46:15.143 Clear aliases: Yes, Unset nat.vars: Yes, Resolve symlinks: Yes; Follow directory symlinks: No
. 2016-11-28 14:46:15.143 LS: ls -la, Ign LS warn: Yes, Scp1 Comp: No
. 2016-11-28 14:46:15.143 Local directory: default, Remote directory: home, Update: Yes, Cache: Yes
. 2016-11-28 14:46:15.143 Cache directory changes: Yes, Permanent: Yes
. 2016-11-28 14:46:15.143 Recycle bin: Delete to: No, Overwritten to: No, Bin path:
. 2016-11-28 14:46:15.143 DST mode: Unix;Timezone offset: 0h 0m
. 2016-11-28 14:46:15.143 --------------------------------------------------------------------------
. 2016-11-28 14:46:15.144 Looking up host "xxx.xx.xxx.229" for SSH connection
. 2016-11-28 14:46:15.144 Connecting to xxx.xx.xxx.229 port 22
. 2016-11-28 14:46:15.209 We claim version: SSH-2.0-WinSCP_release_5.9.2
. 2016-11-28 14:46:15.531 Server version: SSH-2.0-dropbear_0.52
. 2016-11-28 14:46:15.531 We believe remote version has SSH-2 channel request bug
. 2016-11-28 14:46:15.531 Using SSH protocol version 2
. 2016-11-28 14:46:15.531 Have a known host key of type rsa2
. 2016-11-28 14:46:15.600 Using Diffie-Hellman with standard group "group1"
. 2016-11-28 14:46:15.600 Doing Diffie-Hellman key exchange with hash SHA-1
. 2016-11-28 14:46:18.528 Host key fingerprint is:
. 2016-11-28 14:46:18.528 ssh-rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24
. 2016-11-28 14:46:18.528 Verifying host key rsa2 0x10001,0x8655eaba5dcb7994 985cb3d6ebeca273 368ca5dce0996f2a 215340bc46dadc4e 707e0570ae0a9475 99998dbf78b0f313 0267082a5e2b7c92 0edb8494ca9d6b0c 95af8f39f05b2333 cd2dc78fb5787fef 219226c936158e39 fb408056a575d022 c024a55b92bcdb4b 09c3d638a1bc46ba f6912c03c78603fd c034dc7e0b20beda b967 with fingerprint ssh-rsa 1040 ef:aa:a1:30:79:12:c7:f8:02:36:d0:ac:71:6b:5b:24
. 2016-11-28 14:46:18.529 Host key matches configured key
. 2016-11-28 14:46:18.529 Initialised AES-256 SDCTR client->server encryption
. 2016-11-28 14:46:18.529 Initialised HMAC-SHA1 client->server MAC algorithm
. 2016-11-28 14:46:18.593 Initialised AES-256 SDCTR server->client encryption
. 2016-11-28 14:46:18.593 Initialised HMAC-SHA1 server->client MAC algorithm
! 2016-11-28 14:46:18.661 Using username "root".
. 2016-11-28 14:46:18.730 Server offered these authentication methods: publickey,password
. 2016-11-28 14:46:18.730 Prompt (password, "SSH password", <no instructions>, "&Password: ")
. 2016-11-28 14:46:18.730 Using stored password.
. 2016-11-28 14:46:18.731 Sent password
. 2016-11-28 14:46:18.954 Access granted
. 2016-11-28 14:46:18.954 Opening session as main channel
. 2016-11-28 14:46:19.025 Opened main channel
. 2016-11-28 14:46:19.213 Started a shell/command
. 2016-11-28 14:46:19.213 --------------------------------------------------------------------------
. 2016-11-28 14:46:19.213 Using SCP protocol.
. 2016-11-28 14:46:19.214 Doing startup conversation with host.
. 2016-11-28 14:46:19.214 Skipping host startup message (if any).
> 2016-11-28 14:46:19.214 echo "WinSCP: this is end-of-file:0"
< 2016-11-28 14:46:19.286 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:19.287 Detecting variable containing return code of last command.
. 2016-11-28 14:46:19.287 Trying "$status".
> 2016-11-28 14:46:19.287 echo "$status" ; echo "WinSCP: this is end-of-file:0"
< 2016-11-28 14:46:19.615 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:19.615 The response is not numerical exit code
. 2016-11-28 14:46:19.615 Trying "$?".
> 2016-11-28 14:46:19.615 echo "$?" ; echo "WinSCP: this is end-of-file:0"
< 2016-11-28 14:46:19.687 0
< 2016-11-28 14:46:19.949 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:19.949 Return code variable "$?" selected.
> 2016-11-28 14:46:19.949 printenv LANG ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:20.036 sh: can't exec 'printenv': No such file or directory
< 2016-11-28 14:46:20.301 WinSCP: this is end-of-file:1
. 2016-11-28 14:46:20.301 We will not use UTF-8
. 2016-11-28 14:46:20.301 Clearing all aliases.
> 2016-11-28 14:46:20.301 unalias "ls" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:20.380 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:20.644 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:20.645 unalias "echo" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:20.720 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:20.987 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:20.987 unalias "pwd" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:21.064 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:21.330 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:21.330 unalias "cd" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:21.404 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:21.664 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:21.664 unalias "groups" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:21.741 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:22.007 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:22.008 unalias "scp" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:22.083 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:22.350 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:22.350 unalias "rm" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:22.425 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:22.684 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:22.684 unalias "mv" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:22.759 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:23.027 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:23.027 unalias "mkdir" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:23.102 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:23.370 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:23.370 unalias "chmod" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:23.444 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:23.704 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:23.704 unalias "chgrp" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:23.780 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:24.047 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:24.047 unalias "chown" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:24.125 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:24.390 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:24.390 unalias "unset" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:24.464 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:24.730 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:24.730 unalias "unalias" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:24.805 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:25.069 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:25.069 unalias "ln" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:25.144 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:25.409 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:25.409 unalias "cp" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:25.484 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:25.749 WinSCP: this is end-of-file:1
> 2016-11-28 14:46:25.749 unalias "printenv" ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:25.824 sh: can't exec 'unalias': No such file or directory
< 2016-11-28 14:46:26.090 WinSCP: this is end-of-file:1
. 2016-11-28 14:46:26.090 Clearing national user variables.
> 2016-11-28 14:46:26.090 unset "LANG" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.173 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.173 unset "LANGUAGE" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.246 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.246 unset "LC_CTYPE" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.320 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.320 unset "LC_COLLATE" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.394 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.394 unset "LC_MONETARY" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.467 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.467 unset "LC_NUMERIC" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.540 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.540 unset "LC_TIME" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.615 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.615 unset "LC_MESSAGES" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.688 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.688 unset "LC_ALL" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.761 WinSCP: this is end-of-file:0
> 2016-11-28 14:46:26.761 unset "HUMAN_BLOCKS" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:26.835 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:26.835 Looking up groups and users.
> 2016-11-28 14:46:26.835 groups ; echo "WinSCP: this is end-of-file:$?"
! 2016-11-28 14:46:26.915 sh: can't exec 'groups': No such file or directory
< 2016-11-28 14:46:27.174 WinSCP: this is end-of-file:1
. 2016-11-28 14:46:27.174 Getting current directory name.
> 2016-11-28 14:46:27.174 pwd ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:27.247 /
< 2016-11-28 14:46:27.247 WinSCP: this is end-of-file:0
. 2016-11-28 14:46:27.247 Startup conversation with host finished.
< 2016-11-28 14:46:27.247 Script: Active session: [1] root@xxx.xx.xxx.229
> 2016-11-28 14:46:27.940 Script: pwd
< 2016-11-28 14:46:27.940 Script: /
> 2016-11-28 14:46:27.999 Script: put -nopermissions -preservetime -transfer="binary" -- "C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run" "/var/tmp/*"
. 2016-11-28 14:46:28.000 Copying 1 files/directories to remote directory "/var/tmp/"
. 2016-11-28 14:46:28.000 PrTime: Yes; PrRO: No; Rght: rw-r--r--; PrR: No (No); FnCs: N; RIC: 0100; Resume: S (102400); CalcS: Yes; Mask: *
. 2016-11-28 14:46:28.000 TM: B; ClAr: No; RemEOF: No; RemBOM: No; CPS: 0; NewerOnly: No; InclM: ; ResumeL: 0
. 2016-11-28 14:46:28.000 AscM: *.*html; *.htm; *.txt; *.php; *.php3; *.cgi; *.c; *.cpp; *.h; *.pas; *.bas; *.tex; *.pl; *.js; .htaccess; *.xtml; *.css; *.cfg; *.ini; *.sh; *.xml
> 2016-11-28 14:46:28.000 echo "WinSCP: this is begin-of-file" ; scp -r -d -t "/var/tmp" ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:46:28.114 WinSCP: this is begin-of-file
. 2016-11-28 14:46:28.374 SCP remote side confirmation (0)
. 2016-11-28 14:46:28.374 File: "C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run"
. 2016-11-28 14:46:28.375 File: 'C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run' [2016-11-22T18:08:47.884Z] [2449208]
. 2016-11-28 14:46:28.381 Copying "C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run" to remote directory started.
. 2016-11-28 14:46:28.381 Binary transfer mode selected.
> 2016-11-28 14:46:28.382 T1479838127 0 1479838174 0
. 2016-11-28 14:46:28.455 SCP remote side confirmation (0)
> 2016-11-28 14:46:28.455 C0644 2449208 AAA1504v1_1_7.run
. 2016-11-28 14:46:28.531 SCP remote side confirmation (0)
. 2016-11-28 14:46:28.531 Sending BINARY data (first block, 32768 bytes)
. 2016-11-28 14:47:34.788 Sending NULL.
. 2016-11-28 14:47:36.266 SCP remote side confirmation (0)
. 2016-11-28 14:47:36.266 Transfer done: 'C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run' [2449208]
. 2016-11-28 14:47:36.266 Copying "C:\Users\.......\Documents\My Received Files\AAA1504v1_1_7.run" to remote directory finished.
> 2016-11-28 14:47:36.267 E
. 2016-11-28 14:47:36.341 SCP remote side confirmation (0)
< 2016-11-28 14:47:36.341 WinSCP: this is end-of-file:0
> 2016-11-28 14:47:36.789 Script: call cd /tmp
. 2016-11-28 14:47:36.789 Executing user defined command.
> 2016-11-28 14:47:36.789 cd /tmp ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:36.865 WinSCP: this is end-of-file:0
. 2016-11-28 14:47:36.865 Getting current directory name.
> 2016-11-28 14:47:36.865 pwd ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:36.938 /var/tmp
< 2016-11-28 14:47:36.938 WinSCP: this is end-of-file:0
> 2016-11-28 14:47:36.966 Script: call chmod 777 *.run
. 2016-11-28 14:47:36.966 Executing user defined command.
> 2016-11-28 14:47:36.966 chmod 777 *.run ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:37.115 WinSCP: this is end-of-file:0
. 2016-11-28 14:47:37.115 Getting current directory name.
> 2016-11-28 14:47:37.116 pwd ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:37.189 /var/tmp
< 2016-11-28 14:47:37.189 WinSCP: this is end-of-file:0
> 2016-11-28 14:47:37.369 Script: call ./AAA1504v1_1_7.run --load
. 2016-11-28 14:47:37.369 Executing user defined command.
> 2016-11-28 14:47:37.369 ./AAA1504v1_1_7.run --load ; echo "WinSCP: this is end-of-file:$?"
< 2016-11-28 14:47:42.682 Script: Searching for firmware
< 2016-11-28 14:47:42.683 Searching for firmware
< 2016-11-28 14:47:42.683 Script: Validating firmware
< 2016-11-28 14:47:42.683 Validating firmware
< 2016-11-28 14:47:42.683 Script: Image:
< 2016-11-28 14:47:42.683 Image:
< 2016-11-28 14:47:42.683 Script: Image version :1
< 2016-11-28 14:47:42.683 Image version :1
< 2016-11-28 14:47:42.683 Script: Product :AAA 1504
< 2016-11-28 14:47:42.684 Product :AAA 1504
< 2016-11-28 14:47:42.684 Script: Version :1.1.7
< 2016-11-28 14:47:42.684 Version :1.1.7
< 2016-11-28 14:47:42.684 Script: AAA image:
< 2016-11-28 14:47:42.684 AAA image:
< 2016-11-28 14:47:42.684 Script: Version :1.1.7
< 2016-11-28 14:47:42.684 Version :1.1.7
< 2016-11-28 14:47:42.684 Script: Checksum :0x6386
< 2016-11-28 14:47:42.685 Checksum :0x6386
< 2016-11-28 14:47:42.685 Script: Length :100329
< 2016-11-28 14:47:42.688 Length :100329
< 2016-11-28 14:47:42.688 Script: date :Tue May 17 13:49:54 2016
< 2016-11-28 14:47:42.688 date :Tue May 17 13:49:54 2016
< 2016-11-28 14:47:42.688 Script: name :'AAA1504v117.bin'
< 2016-11-28 14:47:42.689 name :'AAA1504v117.bin'
< 2016-11-28 14:47:42.689 Script: MPD image:
< 2016-11-28 14:47:42.689 MPD image:
< 2016-11-28 14:47:49.192 Script: Version :1.1.9
< 2016-11-28 14:47:49.193 Version :1.1.9
< 2016-11-28 14:47:49.193 Script: Checksum :0x8D29
< 2016-11-28 14:47:49.193 Checksum :0x8D29
< 2016-11-28 14:47:49.193 Script: Length :2295808
< 2016-11-28 14:47:49.194 Length :2295808
< 2016-11-28 14:47:49.194 Script: A393B7ED1E98D478D3DC7A567EAD7A0E valid
< 2016-11-28 14:47:49.195 A393B7ED1E98D478D3DC7A567EAD7A0E valid
< 2016-11-28 14:47:49.195 Script: Valid firmware
< 2016-11-28 14:47:49.195 Valid firmware
< 2016-11-28 14:48:07.559 Script: Updating AAA.........success
< 2016-11-28 14:48:07.559 Updating AAA.........success
. 2016-11-28 14:48:46.496 Waiting for data timed out, asking user what to do.
. 2016-11-28 14:48:46.496 Asking user:
. 2016-11-28 14:48:46.496 **Host is not communicating for 15 seconds.
. 2016-11-28 14:48:46.496
. 2016-11-28 14:48:46.496 Wait for another 15 seconds?** ()
< 2016-11-28 14:48:46.496 Script: Host is not communicating for more than 15 seconds.
< 2016-11-28 14:48:46.496 Still waiting...
< 2016-11-28 14:48:46.496 Note: If the problem repeats, try turning off 'Optimize connection buffer size'.
< 2016-11-28 14:48:46.496 Warning: Aborting this operation will close connection!
. 2016-11-28 14:49:46.029 Attempt to close connection due to fatal exception:
* 2016-11-28 14:49:46.029 **Terminated by user.**
. 2016-11-28 14:49:46.029 Closing connection.
. 2016-11-28 14:49:46.029 Sending special code: 12
. 2016-11-28 14:49:46.030 Sent EOF message
< 2016-11-28 14:49:46.030 Script: Terminated by user.
mysession.Timeout = new TimeSpan(0,2,0); //2min