Apache2 Certbot无法为子域正常工作
我有一个带有SSL Certbot的VPS服务器,在Debian和apache中,但在子域中无法正常工作。当使用http://访问我的子域时,它直接进入我配置的目录 但是,当使用https://协议访问时,它直接进入根目录,即Apache2 Certbot无法为子域正常工作,apache2,certbot,debian-buster,Apache2,Certbot,Debian Buster,我有一个带有SSL Certbot的VPS服务器,在Debian和apache中,但在子域中无法正常工作。当使用http://访问我的子域时,它直接进入我配置的目录 但是,当使用https://协议访问时,它直接进入根目录,即/var/www/html 我是VPS服务器的新手,不知道问题出在哪里 这是我的/etc/apache2/sites available/000 default.conf <VirtualHost *:80> # The ServerName d
/var/www/html
我是VPS服务器的新手,不知道问题出在哪里
这是我的/etc/apache2/sites available/000 default.conf
<VirtualHost *:80>
# The ServerName directive sets the request scheme, hostname and port that
# the server uses to identify itself. This is used when creating
# redirection URLs. In the context of virtual hosts, the ServerName
# specifies what hostname must appear in the request's Host: header to
# match this virtual host. For the default virtual host (this file) this
# value is not decisive as it is used as a last resort host regardless.
# However, you must set it for any further virtual host explicitly.
#ServerName www.example.com
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf
RewriteEngine on
RewriteCond %{SERVER_NAME} =app.mysite.com [OR]
RewriteCond %{SERVER_NAME} =mysite.com [OR]
RewriteCond %{SERVER_NAME} =www.mysite.com
RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [END,NE,R=permanent]
</VirtualHost>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
<VirtualHost *:80>
ServerName app.mysite.com
DocumentRoot /var/www/html/app
</VirtualHost>
#ServerName指令设置请求方案、主机名和端口
#服务器使用来标识自身。这在创建时使用
#重定向URL。在虚拟主机的上下文中,服务器名
#指定必须在请求的主机:标头中显示的主机名
#匹配此虚拟主机。对于默认虚拟主机(此文件),此
#该值不是决定性的,因为它被用作最后的宿主。
#但是,必须为任何其他虚拟主机显式设置它。
#服务器名www.example.com
服务器管理员webmaster@localhost
DocumentRoot/var/www/html
#可用日志级别:trace8、…、trace1、调试、信息、通知、警告、,
#错误、暴击、警报、紧急情况。
#还可以为特定应用程序配置日志级别
#模块,例如。
#日志级别信息ssl:警告
ErrorLog${APACHE_LOG_DIR}/error.LOG
CustomLog${APACHE\u LOG\u DIR}/access.LOG组合
#对于conf/available/中的大多数配置文件
#在全局级别启用或禁用,可以
#仅包含一个特定虚拟主机的行。例如
#以下行仅为此主机启用CGI配置
#在使用“A2F”全局禁用后。
#包括conf available/service-cgi-bin.conf
重新启动发动机
RewriteCond%{SERVER_NAME}=app.mysite.com[或]
RewriteCond%{SERVER_NAME}=mysite.com[或]
RewriteCond%{SERVER_NAME}=www.mysite.com
重写规则^https://%{SERVER_NAME}%{REQUEST_URI}[END,NE,R=permanent]
#vim:syntax=apachets=4sw=4sts=4srnoet
服务器名app.mysite.com
DocumentRoot/var/www/html/app
感谢您抽出时间您的配置示例缺少https/端口443的配置 从您的http配置
<VirtualHost *:80>
ServerName app.mysite.com
DocumentRoot /var/www/html/app
</VirtualHost>
服务器名app.mysite.com
DocumentRoot/var/www/html/app
因此,您应该将SSL配置文件的DocumentRoot也更改为DocumentRoot/var/www/html/app
。这个文件可能名为000 default ssl.conf
通常,创建自己的文件并使用它们而不是默认文件是一个好主意。尤其是当您执行dist升级和配置文件更改时,这就不那么麻烦了,因为在更改默认文件时,您会看到一个对话框,并且必须决定要保留哪个版本。选择错误,您必须从备份中恢复更改的配置文件。是!!我解决了我的问题,在
000 default ssl.conf
文件中将端口80更改为443。非常感谢您需要单独的HTTPS配置文件。