通过TCP传输数据总是在251次传输时停止
我正在通过TCP传输整数,几天来我一直在努力使它正常工作,我非常接近。我正在做的是从USB操纵杆获取输入,并将轴的值发送到客户端。我有工作,但我的问题是,它总是停在251。我的意思是,我设置了一个变量,每次将轴的值打印到客户端的屏幕上时,该变量的增量为1。我一直在玩通过TCP传输数据总是在251次传输时停止,c,networking,tcp,network-programming,C,Networking,Tcp,Network Programming,我正在通过TCP传输整数,几天来我一直在努力使它正常工作,我非常接近。我正在做的是从USB操纵杆获取输入,并将轴的值发送到客户端。我有工作,但我的问题是,它总是停在251。我的意思是,我设置了一个变量,每次将轴的值打印到客户端的屏幕上时,该变量的增量为1。我一直在玩MAXRCVLEN,但它仍然停留在251。有人能看看我的代码,看看我是否做错了什么吗 这是server.c文件: #include <stdio.h> #include <stdlib.h> #include
MAXRCVLEN
,但它仍然停留在251。有人能看看我的代码,看看我是否做错了什么吗
这是server.c
文件:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <arpa/inet.h>
#include <sys/types.h>
#include <netinet/in.h>
#include <sys/socket.h>
//joysick libraries
#include <sys/ioctl.h>
#include <stdio.h>
#include <fcntl.h>
#include <linux/joystick.h>
//Joysick device
#define JOY_DEV "/dev/input/js0"
//TCP Port number
#define PORTNUM 2343
int main(int argc, char *argv[])
{
//TCP connect
struct sockaddr_in dest; /* socket info about the machine connecting to us */
struct sockaddr_in serv; /* socket info about our server */
int mysocket; /* socket used to listen for incoming connections */
socklen_t socksize = sizeof(struct sockaddr_in);
memset(&serv, 0, sizeof(serv)); /* zero the struct before filling the fields */
serv.sin_family = AF_INET; /* set the type of connection to TCP/IP */
serv.sin_addr.s_addr = htonl(INADDR_ANY); /* set our address to any interface */
serv.sin_port = htons(PORTNUM); /* set the server port number */
mysocket = socket(AF_INET, SOCK_STREAM, 0);
/* bind serv information to mysocket */
bind(mysocket, (struct sockaddr *)&serv, sizeof(struct sockaddr));
/* start listening, allowing a queue of up to 1 pending connection */
listen(mysocket, 1);
int consocket = accept(mysocket, (struct sockaddr *)&dest, &socksize);
//TCP variable
char msg1[10];
//Joystick variables
int xAxis;
int yAxis;
int xSpeed;
int ySpeed;
//Joystick initialize
int joy_fd, *axis=NULL, num_of_axis=0, num_of_buttons=0, x;
char *button=NULL, name_of_joystick[80];
struct js_event js;
if( ( joy_fd = open( JOY_DEV , O_RDONLY)) == -1 )
{
printf( "Couldn't open joystick\n" );
return -1;
}
//Get number of axes, buttons and name of joystick. Print results to screen
ioctl( joy_fd, JSIOCGAXES, &num_of_axis );
ioctl( joy_fd, JSIOCGBUTTONS, &num_of_buttons );
ioctl( joy_fd, JSIOCGNAME(80), &name_of_joystick );
axis = (int *) calloc( num_of_axis, sizeof( int ) );
button = (char *) calloc( num_of_buttons, sizeof( char ) );
printf("Joystick detected: %s\n\t%d axis\n\t%d buttons\n\n"
, name_of_joystick
, num_of_axis
, num_of_buttons );
//Use non blocking mode for joystick
fcntl( joy_fd, F_SETFL, O_NONBLOCK ); /* use non-blocking mode */
//infinite loop for reading joystick
while(1) {
//loop for tcp connection
while(consocket){
/* read the joystick state */
read(joy_fd, &js, sizeof(struct js_event));
/* see what to do with the event */
switch (js.type & ~JS_EVENT_INIT)
{
case JS_EVENT_AXIS:
axis [ js.number ] = js.value;
break;
case JS_EVENT_BUTTON:
button [ js.number ] = js.value;
break;
}
//Give msg1 variable the value of axis[0]
sprintf(msg1, "%d", axis[0]);
//TCP send
char msg[] = "Hello";
printf("Value is: %d\n", axis[0]);
//printf("Incoming connection from %s - sending welcome\n", inet_ntoa(dest.sin_addr));
send(consocket, msg1, strlen(msg1), 0);
consocket = accept(mysocket, (struct sockaddr *)&dest, &socksize);
printf("Value X is: %s\n", msg1);
printf(" \r");
fflush(stdout);
}
close(consocket);
close(mysocket);
return EXIT_SUCCESS;
}
//Joystick close
close( joy_fd ); /* too bad we never get here */
return 0;
}
如果将
close(consocket)
放在服务器中的accept
之前,会发生什么情况?而且您不能在循环内部调用connect
或accept
关于添加闭合线。这有用吗?(这应该是服务器代码中的循环)
这些评论为我解决了问题 问题是每次在客户端循环中都要连接TCP套接字。 然后,每次在服务器循环中的循环中接受新连接 256可能与每次都不关闭旧的丢弃套接字有关,并且它正在耗尽每个进程的资源或文件句柄 这不是编写客户机/服务器应用程序的正确方法 您应该做的是在进入循环之前只接受一次连接。 然后根据需要发送,但在实际拥有连接的套接字(由accept获得)之前不要发送 客户端应该在循环之前只连接一次,连接时应该在该循环内调用recv。如果出现错误,它可以再次调用connect
关于如何使用套接字编写基本的客户机/服务器应用程序,有一些非常好的示例和详细信息,其中套接字是套接字编程的最佳资源之一。是否有理由每次通过循环都要建立新连接?另外,您没有关闭任何套接字,这可能会导致问题。@Xymostech我在
client.c
中取消了close(mysocket)
的注释,现在在它停止之前,im已达到1017。我对TCP编程还不熟悉,所以我把while循环放在最上面。我应该把它放在哪里,这样它就不会每次都建立新连接,只接收新数据了?如果在服务器中的接受之前放置关闭(consocket)
会发生什么?你不能在循环中调用connect
或accept
。@Xymostech它仍然不能正常工作,我想我很难理解你的确切意思?你能提供一些代码吗?关于添加关闭
行。这有用吗?(这应该是服务器代码中的循环)
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <arpa/inet.h>
#include <sys/types.h>
#include <netinet/in.h>
#include <sys/socket.h>
#define MAXRCVLEN 10000
#define PORTNUM 2343
int main(int argc, char *argv[])
{
int i = 0;
while(1){
char buffer[MAXRCVLEN + 1]; /* +1 so we can add null terminator */
int len, mysocket;
struct sockaddr_in dest;
mysocket = socket(AF_INET, SOCK_STREAM, 0);
memset(&dest, 0, sizeof(dest)); /* zero the struct */
dest.sin_family = AF_INET;
dest.sin_addr.s_addr = inet_addr("192.168.254.16"); /* set destination IP number */
dest.sin_port = htons(PORTNUM); /* set destination port number */
connect(mysocket, (struct sockaddr *)&dest, sizeof(struct sockaddr));
len = recv(mysocket, buffer, MAXRCVLEN, 0);
/* We have to null terminate the received data ourselves */
buffer[len] = '\0';
printf("Received %s (%d bytes).\n", buffer, len);
printf("Number is: %d", i);
i++;
//close(mysocket);
}
return EXIT_SUCCESS;
}