Mongodb WebStorm上的Mongo Shell不工作
我正试图从WebStorm打开Mongo外壳。我已经安装了Mongo插件，还从Mongo Explorer设置了mongodb服务器。连接后，当我尝试打开Mongo shell时，出现以下错误：Mongodb WebStorm上的Mongo Shell不工作,mongodb,webstorm,Mongodb,Webstorm,我正试图从WebStorm打开Mongo外壳。我已经安装了Mongo插件，还从Mongo Explorer设置了mongodb服务器。连接后，当我尝试打开Mongo shell时，出现以下错误： Invalid command: localhost:27017/local Options: General options: -h [ --help ] show this usage information --version
Invalid command: localhost:27017/local
Options:
General options:
-h [ --help ] show this usage information
--version show version information
-f [ --config ] arg configuration file specifying
additional options
-v [ --verbose ] [=arg(=v)] be more verbose (include multiple times
for more verbosity e.g. -vvvvv)
--quiet quieter output
--port arg specify port number - 27017 by default
--bind_ip arg comma separated list of ip addresses to
listen on - all local ips by default
--ipv6 enable IPv6 support (disabled by
default)
--maxConns arg max number of simultaneous connections
- 1000000 by default
--logpath arg log file to send write to instead of
stdout - has to be a file, not
directory
--logappend append to logpath instead of
over-writing
--logRotate arg set the log rotation behavior
(rename|reopen)
--timeStampFormat arg Desired format for timestamps in log
messages. One of ctime, iso8601-utc or
iso8601-local
--pidfilepath arg full path to pidfile (if not set, no
pidfile is created)
--keyFile arg private key for cluster authentication
--noauth run without security
--setParameter arg Set a configurable parameter
--httpinterface enable http interface
--transitionToAuth For rolling access control upgrade.
Attempt to authenticate over outgoing
connections and proceed regardless of
success. Accept incoming connections
with or without authentication.
--clusterAuthMode arg Authentication mode used for cluster
authentication. Alternatives are
(keyFile|sendKeyFile|sendX509|x509)
--networkMessageCompressors arg Comma-separated list of compressors to
use for network messages
--auth run with security
--jsonp allow JSONP access via http (has
security implications)
--rest turn on simple rest api
--slowms arg (=100) value of slow for profile and console
log
--profile arg 0=off 1=slow, 2=all
--cpu periodically show cpu and iowait
utilization
--sysinfo print some diagnostic system
information
--noIndexBuildRetry don't retry any index builds that were
interrupted by shutdown
--noscripting disable scripting engine
--notablescan do not allow table scans
Windows Service Control Manager options:
--install install Windows service
--remove remove Windows service
--reinstall reinstall Windows service (equivalent
to --remove followed by --install)
--serviceName arg Windows service name
--serviceDisplayName arg Windows service display name
--serviceDescription arg Windows service description
--serviceUser arg account for service execution
--servicePassword arg password used to authenticate
serviceUser
Replication options:
--oplogSize arg size to use (in MB) for replication op
log. default is 5% of disk space (i.e.
large is good)
Master/slave options (old; use replica sets instead):
--master master mode
--slave slave mode
--source arg when slave: specify master as
<server:port>
--only arg when slave: specify a single database
to replicate
--slavedelay arg specify delay (in seconds) to be used
when applying master ops to slave
--autoresync automatically resync if slave data is
stale
Replica set options:
--replSet arg arg is <setname>[/<optionalseedhostlist
>]
--replIndexPrefetch arg specify index prefetching behavior (if
secondary) [none|_id_only|all]
--enableMajorityReadConcern enables majority readConcern
Sharding options:
--configsvr declare this is a config db of a
cluster; default port 27019; default
dir /data/configdb
--shardsvr declare this is a shard db of a
cluster; default port 27018
SSL options:
--sslOnNormalPorts use ssl on configured ports
--sslMode arg set the SSL operation mode
(disabled|allowSSL|preferSSL|requireSSL
)
--sslPEMKeyFile arg PEM file for ssl
--sslPEMKeyPassword arg PEM file password
--sslClusterFile arg Key file for internal SSL
authentication
--sslClusterPassword arg Internal authentication key file
password
--sslCAFile arg Certificate Authority file for SSL
--sslCRLFile arg Certificate Revocation List file for
SSL
--sslDisabledProtocols arg Comma separated list of TLS protocols
to disable [TLS1_0,TLS1_1,TLS1_2]
--sslWeakCertificateValidation allow client to connect without
presenting a certificate
--sslAllowConnectionsWithoutCertificates
allow client to connect without
presenting a certificate
--sslAllowInvalidHostnames Allow server certificates to provide
non-matching hostnames
--sslAllowInvalidCertificates allow connections to servers with
invalid certificates
--sslFIPSMode activate FIPS 140-2 mode at startup
Storage options:
--storageEngine arg what storage engine to use - defaults
to wiredTiger if no data files present
--dbpath arg directory for datafiles - defaults to
\data\db\ which is C:\data\db\ based on
the current working drive
--directoryperdb each database will be stored in a
separate directory
--noprealloc disable data file preallocation - will
often hurt performance
--nssize arg (=16) .ns file size (in MB) for new databases
--quota limits each database to a certain
number of files (8 default)
--quotaFiles arg number of files allowed per db, implies
--quota
--smallfiles use a smaller default file size
--syncdelay arg (=60) seconds between disk syncs (0=never,
but not recommended)
--upgrade upgrade db if needed
--repair run repair on all dbs
--repairpath arg root directory for repair files -
defaults to dbpath
--journal enable journaling
--nojournal disable journaling (journaling is on by
default for 64 bit)
--journalOptions arg journal diagnostic options
--journalCommitInterval arg how often to group/batch commit (ms)
WiredTiger options:
--wiredTigerCacheSizeGB arg maximum amount of memory to allocate
for cache; defaults to 1/2 of physical
RAM
--wiredTigerStatisticsLogDelaySecs arg (=0)
seconds to wait between each write to a
statistics file in the dbpath; 0 means
do not log statistics
--wiredTigerJournalCompressor arg (=snappy)
use a compressor for log records
[none|snappy|zlib]
--wiredTigerDirectoryForIndexes Put indexes and data in different
directories
--wiredTigerCollectionBlockCompressor arg (=snappy)
block compression algorithm for
collection data [none|snappy|zlib]
--wiredTigerIndexPrefixCompression arg (=1)
use prefix compression on row-store
leaf pages
Process finished with exit code 1
无效命令：localhost:27017/local
选项：
一般选择：
-h[--help]显示此使用信息
--版本显示版本信息
-f[--config]参数配置文件指定
附加选项
-v[--verbose][=arg（=v）]更详细（包括多次
更多详细信息，例如-vvv）
--安静输出
--端口arg默认情况下指定端口号-27017
--绑定\u ip arg以逗号分隔的ip地址列表到
侦听-默认情况下所有本地IP
--ipv6启用ipv6支持（由禁用）
默认值）
--maxConns arg最大同时连接数
-默认为1000000
--要将写操作发送到的logpath arg日志文件，而不是
stdout-必须是文件，而不是
目录
--logappend附加到logpath而不是
过度书写
--logRotate arg设置日志旋转行为
（重命名|重新打开）
--timeStampFormat arg日志中时间戳的所需格式
信息。ctime、iso8601 utc或
iso8601本地
--pidfilepath参数pidfile的完整路径（如果未设置，则为否
（已创建文件）
--用于群集身份验证的keyFile arg私钥
--没有安全措施就无法运行
--setParameter arg设置一个可配置的参数
--httpinterface启用http接口
--用于滚动访问控制升级的TransitionAuth。
尝试通过传出服务器进行身份验证
连接并继续，无论
成功。接受传入连接
有或没有身份验证。
--clusterAuthMode arg用于群集的身份验证模式
认证。替代品是
（keyFile | sendKeyFile | sendX509 | x509）
--networkMessageCompressors参数以逗号分隔的压缩程序列表
用于网络消息
--身份验证与安全运行
--jsonp允许通过http（has）访问jsonp
安全影响）
--rest打开简单RESTAPI
--slowms arg（=100）配置文件和控制台的慢速值
日志
--配置文件arg 0=关闭1=缓慢，2=全部
--cpu周期性地显示cpu和iowait
利用
--系统信息打印一些诊断系统
信息
--noIndexBuildRetry不重试已创建的任何索引生成
被关机中断
--noscripting禁用脚本引擎
--notablescan不允许表扫描
Windows服务控制管理器选项：
--安装Windows服务
--删除Windows服务
--重新安装Windows服务（等效）
要--删除，然后--安装）
--serviceName参数Windows服务名称
--serviceDisplayName参数Windows服务显示名称
--serviceDescription arg Windows服务说明
--服务执行的serviceUser arg帐户
--servicePassword arg用于身份验证的密码
服务用户
复制选项：
--用于复制操作的oplogSize arg大小（MB）
日志默认值为磁盘空间的5%（即。
（大的好）
主/从选项（旧；改用副本集）：
--主模式
--从-从模式
--从机时的源参数：将主机指定为
--从属时仅参数：指定单个数据库
复制
--slavedelay arg指定要使用的延迟（以秒为单位）
将主操作应用于从操作时
--自动同步如果从属数据丢失，则自动重新同步
不新鲜的
副本集选项：
--replSet arg arg为[/]
--replIndexPrefetch参数指定索引预取行为（如果
二级）[无| |仅id |全部]
--enableMajorityReadConcern启用ma