Can';是否从基于Nginx php-fpm的dedi发送电子邮件?
我有一个网站,它有联系页面。在该页面中有“电子邮件和评论”选项卡。每当有人把他的电子邮件和评论和点击提交邮件应该来我的电子邮件。但它不起作用 我使用这个php文件的邮件功能 我在我的专用服务器上安装了nginx&php-fpmCan';是否从基于Nginx php-fpm的dedi发送电子邮件?,nginx,php,dedicated-server,Nginx,Php,Dedicated Server,我有一个网站,它有联系页面。在该页面中有“电子邮件和评论”选项卡。每当有人把他的电子邮件和评论和点击提交邮件应该来我的电子邮件。但它不起作用 我使用这个php文件的邮件功能 我在我的专用服务器上安装了nginx&php-fpm <?php /* This first bit sets the email address that you want the form to be submitted to. You will need to change this value to a val
<?php
/*
This first bit sets the email address that you want the form to be submitted to.
You will need to change this value to a valid email address that you can access.
*/
$webmaster_email = "myemail@yahoo.com";
/*
This bit sets the URLs of the supporting pages.
If you change the names of any of the pages, you will need to change the values here.
*/
$feedback_page = "contact.html";
$error_page = "error_message.html";
$thankyou_page = "thank_you.html";
/*
This next bit loads the form field data into variables.
If you add a form field, you will need to add it here.
*/
$email_address = $_REQUEST['email_address'] ;
$comments = $_REQUEST['comments'] ;
/*
The following function checks for email injection.
Specifically, it checks for carriage returns - typically used by spammers to inject a CC list.
*/
function isInjected($str) {
$injections = array('(\n+)',
'(\r+)',
'(\t+)',
'(%0A+)',
'(%0D+)',
'(%08+)',
'(%09+)'
);
$inject = join('|', $injections);
$inject = "/$inject/i";
if(preg_match($inject,$str)) {
return true;
}
else {
return false;
}
}
// If the user tries to access this script directly, redirect them to the feedback form,
if (!isset($_REQUEST['email_address'])) {
header( "Location: $feedback_page" );
}
// If the form fields are empty, redirect to the error page.
elseif (empty($email_address) || empty($comments)) {
header( "Location: $error_page" );
}
// If email injection is detected, redirect to the error page.
elseif ( isInjected($email_address) ) {
header( "Location: $error_page" );
}
// If we passed all previous tests, send the email then redirect to the thank you page.
else {
mail( "$webmaster_email", "Feedback Form Results",
$comments, "From: $email_address" );
header( "Location: $thankyou_page" );
}
?>
但我的电子邮件里没有邮件。当我有apache时,它正在工作。我是nginx的新手。那么我怎样才能让它为nginx工作呢
任何帮助都将不胜感激 这是使用mail()函数的一个非常好的替代方法 有关配置,请参阅最后一个函数
<?php
class Xmail{
# LOG VAR
public $log = Array();
# NEW LINE
private $line = "\r\n";
# ATTACHED FILES
public $files = Array();
# CONFIG GENERAL
private $tpl = "";
private $mode = "mail";
function setTPL($value) { if($value != "") $this->tpl = $value; }
function setMODE($value) { if($value != "") $this->mode = $value; }
# CONFIG SMTP
private $smtp_host = "localhost";
private $smtp_port = "25";
private $smtp_username = "";
private $smtp_password = "";
function setSmtpHost($value) { if($value != "") $this->smtp_host = $value; }
function setSmtpPort($value) { if($value != "") $this->smtp_port = $value; }
function setSmtpUser($value) { if($value != "") $this->smtp_username = $value; }
function setSmtpPass($value) { if($value != "") $this->smtp_password = $value; }
# CONFIG SOCKET
private $from = "sokmail@localhost"; // sender email address
private $host = "localhost"; // your domain name here
private $port = "25"; // it is always 25 but i think it's best to have this for tests when developper pc has port 25 blocked and server has alternate port [i use 26 cause 25 is locked for anti SPAM by ISP]
private $time = "30"; // timeout [time short :D]
private $test = false; // test mode, does not send the email but you can see the log up to the point of sending email, good to check email addresses if valid or server if black-listed
function setFrom($value) { if($value != "") $this->from = $value; }
function setHost($value) { if($value != "") $this->host = $value; }
function setPort($value) { if($value != "") $this->port = $value; }
function setTime($value) { if($value != "") $this->time = $value; }
function setTest($value) { if($value != "") $this->test = $value; }
# MAIN FUNCTION
function mail($to, $subject, $msg, $headers, $attachments = NULL) {
# MESSAGE HTML
$msg = str_replace("\'","'",$msg);
$msg = str_replace('\"','"',$msg);
# Use template if case
if(is_file($this->tpl)){
$html = implode("", file($this->tpl));
$html = str_replace("{MESSAGE}", $msg, $html);
}else
$html = $msg;
$boundary1 = '-----='.md5(uniqid(rand()));
$boundary2 = '-----='.md5(uniqid(rand()));
$message .= "\r\nThis is a multi-part message in MIME format.\r\n\r\n";
$message .= "--".$boundary1."\r\n";
$message .= "Content-Type: multipart/alternative;\r\n boundary=\"$boundary2\"\r\n\r\n";
# MESSAGE TEXT
$message .= "--".$boundary2."\r\n";
$message .= "Content-Type: text/plain;\r\n charset=\"UTF-8\"\r\n";
$message .= "Content-Transfer-Encoding: 7bit\r\n";
$message .= strip_tags($msg) . "\r\n";
$message .= "\r\n\r\n";
# MESSAGE HTML
$message .= "--".$boundary2."\r\n";
$message .= "Content-Type: text/html;\r\n charset=\"UTF-8\"\r\n";
$message .= "Content-Transfer-Encoding: quoted-printable\r\n\r\n";
$message .= "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">\r\n";
$message .= "<html>\r\n";
$message .= "<body>\r\n";
$message .= str_replace("
", "<br/>", $html) . "<br/>\r\n";
$message .= "</body>\r\n";
$message .= "</html>\r\n\r\n";
$message .= "--".$boundary2."--\r\n\r\n";
if(is_array($attachments)) {
foreach($attachments AS $file_url) {
if(is_file($file_url)) {
$file_name = pathinfo($file_url, PATHINFO_BASENAME);
$file_type = $this->find_mime(pathinfo($file_url, PATHINFO_EXTENSION));
# ATTACHMENT
$message .= "--".$boundary1."\r\n";
$message .= "Content-Type: ".$file_type.";\r\n name=\"$file_name\"\r\n";
$message .= "Content-Transfer-Encoding: base64\r\n";
$message .= "Content-Disposition: attachment;\r\n filename=\"$file_name\"\r\n\r\n";
$fp = fopen($file_url, 'r');
do {
$data = fread($fp, 8192);
if (strlen($data) == 0) break;
$content .= $data;
}
while (true);
$content_encode = chunk_split(base64_encode($content));
$message .= $content_encode."\r\n\r\n";
$content = '';
unset($content);
}
}
}
$message .= "--".$boundary1."--\r\n\r\n";
$headers .= "MIME-Version: 1.0\r\n";
$headers .= "Content-Type: multipart/mixed;\r\n boundary=\"$boundary1\"\r\n";
if($this->mode == "smtp" || $this->mode == "mx")
return $this->sokmail($to, $subject, $message, $headers);
else {
if(mail($to, $subject, $message, $headers)) return true;
return false;
}
}
# send mail directly to destination MX server
function sokmail($to, $subject, $message, $headers) {
// get server based on mode
if($this->mode == "mx") {
list($user, $domain) = split("@",$to);
getmxrr($domain, $mxhosts);
$server = $mxhosts['0'];
}else{
$server = $this->smtp_host;
}
# open socket
$socket = @fsockopen($server, $this->port, $errno, $errstr, $this->time);
if(empty($socket)) { return false; }
if($this->parse_response($socket, 220, "SOCKET") != 220) { fclose($socket); return false; }
# say HELO to our little friend
fputs($socket, "EHLO " . $this->host . $this->line);
if($this->parse_response($socket, 250, "HELO") != 250) { fclose($socket); return false; }
# if SMTP
if($this->mode == "smtp" && !empty($this->smtp_username) && !empty($this->smtp_password) ) {
# start login
fputs($socket, "AUTH LOGIN" . $this->line);
if($this->parse_response($socket, 334, "AUTH LOGIN") != 334) { fclose($socket); return false; }
fputs($socket, base64_encode($this->smtp_username) . $this->line);
if($this->parse_response($socket, 334, "USERNAME") != 334) { fclose($socket); return false; }
fputs($socket, base64_encode($this->smtp_password) . $this->line);
if($this->parse_response($socket, 235, "PASSWORD") != 235) { fclose($socket); return false; }
}
# email from
fputs($socket, "MAIL FROM: <" . $this->from . ">" . $this->line);
if($this->parse_response($socket, 250, "MAIL FROM") != 250) { fclose($socket); return false; }
# email to
fputs($socket, "RCPT TO: <" . $to . ">" . $this->line);
if($this->parse_response($socket, 250, "RCPT TO") != 250) { fclose($socket); return false; }
# check for test mode
if($this->test != true) {
# send data start command
fputs($socket, "DATA" . $this->line);
if($this->parse_response($socket, 354, "DATA") != 354) { fclose($socket); return false; }
# make the deposit :)
fputs($socket, "Subject: " . $subject . $this->line);
fputs($socket, "To: " . $to . $this->line);
fputs($socket, $headers . $this->line);
fputs($socket, $message . $this->line);
fputs($socket, "." . $this->line); # this line sends a dot to mark the end of message
if($this->parse_response($socket, 250, ".") != 250) { fclose($socket); return false; }
}
# say goodbye
fputs($socket,"QUIT" . $this->line);
$this->parse_response($socket, 221, "QUIT");
fclose($socket);
return true;
}
# parse server responces for above function
function parse_response($socket, $expected, $cmd) {
$response = '';
$this->log[$cmd] = "";
while (substr($response, 3, 1) != ' ') {
if(!($response = fgets($socket, 256))) $this->log["ERROR RESPONSE"] = "Couldn't get mail server response codes.";
else $this->log[$cmd] .= $response;
# for security we break the loop after 10 cause this should not happen ever
$i++;
if($i == 10) return false;
}
# shows an error if expected code not received
if(substr($response, 0, 3) != $expected) $this->log["ERROR CODES"] = "Ran into problems sending Mail. Received: " . substr($response, 0, 3) . ".. but expected: " . $expected;
# access denied..quit
if(substr($response, 0, 3) == 451) $this->log["ERROR QUIT"] = "Server declined access. Quitting.";
return substr($response, 0, 3);
}
function find_mime($ext) {
# create mimetypes array
$mimetypes = $this->mime_array();
# return mime type for extension
if (isset($mimetypes[$ext])) {
return $mimetypes[$ext];
# if the extension wasn't found return octet-stream
} else {
return 'application/octet-stream';
}
}
function mime_array() {
return array(
"ez" => "application/andrew-inset",
"hqx" => "application/mac-binhex40",
"cpt" => "application/mac-compactpro",
"doc" => "application/msword",
"bin" => "application/octet-stream",
"dms" => "application/octet-stream",
"lha" => "application/octet-stream",
"lzh" => "application/octet-stream",
"exe" => "application/octet-stream",
"class" => "application/octet-stream",
"so" => "application/octet-stream",
"dll" => "application/octet-stream",
"oda" => "application/oda",
"pdf" => "application/pdf",
"ai" => "application/postscript",
"eps" => "application/postscript",
"ps" => "application/postscript",
"smi" => "application/smil",
"smil" => "application/smil",
"wbxml" => "application/vnd.wap.wbxml",
"wmlc" => "application/vnd.wap.wmlc",
"wmlsc" => "application/vnd.wap.wmlscriptc",
"bcpio" => "application/x-bcpio",
"vcd" => "application/x-cdlink",
"pgn" => "application/x-chess-pgn",
"cpio" => "application/x-cpio",
"csh" => "application/x-csh",
"dcr" => "application/x-director",
"dir" => "application/x-director",
"dxr" => "application/x-director",
"dvi" => "application/x-dvi",
"spl" => "application/x-futuresplash",
"gtar" => "application/x-gtar",
"hdf" => "application/x-hdf",
"js" => "application/x-javascript",
"skp" => "application/x-koan",
"skd" => "application/x-koan",
"skt" => "application/x-koan",
"skm" => "application/x-koan",
"latex" => "application/x-latex",
"nc" => "application/x-netcdf",
"cdf" => "application/x-netcdf",
"sh" => "application/x-sh",
"shar" => "application/x-shar",
"swf" => "application/x-shockwave-flash",
"sit" => "application/x-stuffit",
"sv4cpio" => "application/x-sv4cpio",
"sv4crc" => "application/x-sv4crc",
"tar" => "application/x-tar",
"tcl" => "application/x-tcl",
"tex" => "application/x-tex",
"texinfo" => "application/x-texinfo",
"texi" => "application/x-texinfo",
"t" => "application/x-troff",
"tr" => "application/x-troff",
"roff" => "application/x-troff",
"man" => "application/x-troff-man",
"me" => "application/x-troff-me",
"ms" => "application/x-troff-ms",
"ustar" => "application/x-ustar",
"src" => "application/x-wais-source",
"xhtml" => "application/xhtml+xml",
"xht" => "application/xhtml+xml",
"zip" => "application/zip",
"au" => "audio/basic",
"snd" => "audio/basic",
"mid" => "audio/midi",
"midi" => "audio/midi",
"kar" => "audio/midi",
"mpga" => "audio/mpeg",
"mp2" => "audio/mpeg",
"mp3" => "audio/mpeg",
"aif" => "audio/x-aiff",
"aiff" => "audio/x-aiff",
"aifc" => "audio/x-aiff",
"m3u" => "audio/x-mpegurl",
"ram" => "audio/x-pn-realaudio",
"rm" => "audio/x-pn-realaudio",
"rpm" => "audio/x-pn-realaudio-plugin",
"ra" => "audio/x-realaudio",
"wav" => "audio/x-wav",
"pdb" => "chemical/x-pdb",
"xyz" => "chemical/x-xyz",
"bmp" => "image/bmp",
"gif" => "image/gif",
"ief" => "image/ief",
"jpeg" => "image/jpeg",
"jpg" => "image/jpeg",
"jpe" => "image/jpeg",
"png" => "image/png",
"tiff" => "image/tiff",
"tif" => "image/tif",
"djvu" => "image/vnd.djvu",
"djv" => "image/vnd.djvu",
"wbmp" => "image/vnd.wap.wbmp",
"ras" => "image/x-cmu-raster",
"pnm" => "image/x-portable-anymap",
"pbm" => "image/x-portable-bitmap",
"pgm" => "image/x-portable-graymap",
"ppm" => "image/x-portable-pixmap",
"rgb" => "image/x-rgb",
"xbm" => "image/x-xbitmap",
"xpm" => "image/x-xpixmap",
"xwd" => "image/x-windowdump",
"igs" => "model/iges",
"iges" => "model/iges",
"msh" => "model/mesh",
"mesh" => "model/mesh",
"silo" => "model/mesh",
"wrl" => "model/vrml",
"vrml" => "model/vrml",
"css" => "text/css",
"html" => "text/html",
"htm" => "text/html",
"asc" => "text/plain",
"txt" => "text/plain",
"rtx" => "text/richtext",
"rtf" => "text/rtf",
"sgml" => "text/sgml",
"sgm" => "text/sgml",
"tsv" => "text/tab-seperated-values",
"wml" => "text/vnd.wap.wml",
"wmls" => "text/vnd.wap.wmlscript",
"etx" => "text/x-setext",
"xml" => "text/xml",
"xsl" => "text/xml",
"mpeg" => "video/mpeg",
"mpg" => "video/mpeg",
"mpe" => "video/mpeg",
"qt" => "video/quicktime",
"mov" => "video/quicktime",
"mxu" => "video/vnd.mpegurl",
"avi" => "video/x-msvideo",
"movie" => "video/x-sgi-movie",
"ice" => "x-conference-xcooltalk"
);
}
}
# PHP does not have getmxr function on windows so I built one
function win_getmxrr($hostname, &$mxhosts, &$mxweight=false) {
if (strtoupper(substr(PHP_OS, 0, 3)) != 'WIN') return;
if (!is_array ($mxhosts) ) $mxhosts = array();
if (empty($hostname)) return;
$exec='nslookup -type=MX '.escapeshellarg($hostname);
@exec($exec, $output);
if (empty($output)) return;
$i=-1;
foreach ($output as $line) {
$i++;
if (preg_match("/^$hostname\tMX preference = ([0-9]+), mail exchanger = (.+)$/i", $line, $parts)) {
$mxweight[$i] = trim($parts[1]);
$mxhosts[$i] = trim($parts[2]);
}
if (preg_match('/responsible mail addr = (.+)$/i', $line, $parts)) {
$mxweight[$i] = $i;
$mxhosts[$i] = trim($parts[1]);
}
}
return ($i!=-1);
}
if (!function_exists('getmxrr')) {
function getmxrr($hostname, &$mxhosts, &$mxweight=false) {
return win_getmxrr($hostname, $mxhosts, $mxweight);
}
}
function xmail($to, $subject, $message, $headers="", $attachments=""){
$xmail = new Xmail();
$xmail->setMODE("mx"); // default is mail; options: mail,smtp,mx
// MX setup if in 'mx' mode
$xmail->setFrom("someone@somedomain.com");
$xmail->setHost($_SERVER['HTTP_HOST']);
// SMTP SETUP if in 'smtp' mode
$xmail->setSmtpHost("localhost");
$xmail->setSmtpPort(25);
$xmail->setSmtpUser("someuser");
$xmail->setSmtpPass("somepassword");
// from this point on you have to provide the same info as if you would use mail()
if($headers == "")
$headers = "From: <someone@somedomain.com>\r\n";
// !!! DO NOT ADD MIME VERSION OR CONTENT TYPE HEADERS !!!
// send the email
$xmail->mail($to, $subject, $message, $headers, $attachments);
}
?>
查看您的php错误日志和MTA日志。php fpm可能是在与apache不同的用户下运行的;另外,您可以先将代码限制在最基本的部分:)我的错误日志中没有任何内容。发布完整代码我的意思是$\u请求变量从何而来?