Php Plupload:error“;代码”;:100和"x201C ;;消息”;:&引用;无法打开临时目录
因此,我正在与plupload/codeigniter合作一个项目。我在控制器中有一个名为upload的函数下的custom upload.php代码。plupload的javascript嵌入到视图中。但我在$targetDir上尝试了几种变体,但都没有成功 脚本无法打开临时目录。我试图在目录上安装chmod755,但没有成功。它仍然在我的Mac上的本地环境中Php Plupload:error“;代码”;:100和"x201C ;;消息”;:&引用;无法打开临时目录,php,codeigniter,plupload,Php,Codeigniter,Plupload,因此,我正在与plupload/codeigniter合作一个项目。我在控制器中有一个名为upload的函数下的custom upload.php代码。plupload的javascript嵌入到视图中。但我在$targetDir上尝试了几种变体,但都没有成功 脚本无法打开临时目录。我试图在目录上安装chmod755,但没有成功。它仍然在我的Mac上的本地环境中 function upload() { // HTTP headers for no cache etc heade
function upload() {
// HTTP headers for no cache etc
header("Expires: Mon, 26 Jul 1997 05:00:00 GMT");
header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT");
header("Cache-Control: no-store, no-cache, must-revalidate");
header("Cache-Control: post-check=0, pre-check=0", false);
header("Pragma: no-cache");
// Settings
//$targetDir = SITE_DIR . 'nfsopslag/klachten/';
//$targetDir = SITE_WEB_DIR . 'nfsopslag/klachten/';
//$targetDir = '..'. SITE_WEB_DIR . 'nfsopslag/klachten/';
$targetDir = "../../../nfsopslag/klachten";
$cleanupTargetDir = false; // Remove old files
$maxFileAge = 5 * 3600; // Temp file age in seconds
// 5 minutes execution time
@set_time_limit(5 * 60);
// Uncomment this one to fake upload time
// usleep(5000);
// Get parameters
$chunk = isset($_REQUEST["chunk"]) ? intval($_REQUEST["chunk"]) : 0;
$chunks = isset($_REQUEST["chunks"]) ? intval($_REQUEST["chunks"]) : 0;
$fileName = isset($_REQUEST["name"]) ? $_REQUEST["name"] : '';
// Clean the fileName for security reasons
$fileName = preg_replace('/[^\w\._]+/', '_', $fileName);
// Make sure the fileName is unique but only if chunking is disabled
if ($chunks < 2 && file_exists($targetDir . DIRECTORY_SEPARATOR . $fileName)) {
$ext = strrpos($fileName, '.');
$fileName_a = substr($fileName, 0, $ext);
$fileName_b = substr($fileName, $ext);
$count = 1;
while (file_exists($targetDir . DIRECTORY_SEPARATOR . $fileName_a . '_' . $count . $fileName_b))
$count++;
$fileName = $fileName_a . '_' . $count . $fileName_b;
}
$filePath = $targetDir . DIRECTORY_SEPARATOR . $fileName;
// Create target dir
if (!file_exists($targetDir))
@mkdir($targetDir);
// Remove old temp files
if ($cleanupTargetDir && is_dir($targetDir) && ($dir = opendir($targetDir))) {
while (($file = readdir($dir)) !== false) {
$tmpfilePath = $targetDir . DIRECTORY_SEPARATOR . $file;
// Remove temp file if it is older than the max age and is not the current file
if (preg_match('/\.part$/', $file) && (filemtime($tmpfilePath) < time() - $maxFileAge) && ($tmpfilePath != "{$filePath}.part")) {
@unlink($tmpfilePath);
}
}
closedir($dir);
} else
die('{"jsonrpc" : "2.0", "error" : {"code": 100, "message": "Failed to open temp directory."}, "id" : "id"}');
// Look for the content type header
if (isset($_SERVER["HTTP_CONTENT_TYPE"]))
$contentType = $_SERVER["HTTP_CONTENT_TYPE"];
if (isset($_SERVER["CONTENT_TYPE"]))
$contentType = $_SERVER["CONTENT_TYPE"];
// Handle non multipart uploads older WebKit versions didn't support multipart in HTML5
if (strpos($contentType, "multipart") !== false) {
if (isset($_FILES['file']['tmp_name']) && is_uploaded_file($_FILES['file']['tmp_name'])) {
// Open temp file
$out = fopen("{$filePath}.part", $chunk == 0 ? "wb" : "ab");
if ($out) {
// Read binary input stream and append it to temp file
$in = fopen($_FILES['file']['tmp_name'], "rb");
if ($in) {
while ($buff = fread($in, 4096))
fwrite($out, $buff);
} else
die('{"jsonrpc" : "2.0", "error" : {"code": 101, "message": "Failed to open input stream."}, "id" : "id"}');
fclose($in);
fclose($out);
@unlink($_FILES['file']['tmp_name']);
} else
die('{"jsonrpc" : "2.0", "error" : {"code": 102, "message": "Failed to open output stream."}, "id" : "id"}');
} else
die('{"jsonrpc" : "2.0", "error" : {"code": 103, "message": "Failed to move uploaded file."}, "id" : "id"}');
} else {
// Open temp file
$out = fopen("{$filePath}.part", $chunk == 0 ? "wb" : "ab");
if ($out) {
// Read binary input stream and append it to temp file
$in = fopen("php://input", "rb");
if ($in) {
while ($buff = fread($in, 4096))
fwrite($out, $buff);
} else
die('{"jsonrpc" : "2.0", "error" : {"code": 101, "message": "Failed to open input stream."}, "id" : "id"}');
fclose($in);
fclose($out);
} else
die('{"jsonrpc" : "2.0", "error" : {"code": 102, "message": "Failed to open output stream."}, "id" : "id"}');
}
// Check if file has been uploaded
if (!$chunks || $chunk == $chunks - 1) {
// Strip the temp .part suffix off
rename("{$filePath}.part", $filePath);
}
// Return JSON-RPC response
//die('{"jsonrpc" : "2.0", "result" : null, "id" : "id"}');
die('{"jsonrpc" : "2.0", "result" : null, "id" : "id", "cleanFileName" : "'.$fileName.'"}');
}
函数上传(){
//无缓存等的HTTP头
标题(“到期日期:1997年7月26日星期一05:00:00 GMT”);
标题(“上次修改:”.gmdate(“D,D M Y H:i:s”)“GMT”);
标头(“缓存控制:无存储,无缓存,必须重新验证”);
标头(“缓存控制:后检查=0,预检查=0”,false);
标题(“杂注:无缓存”);
//背景
//$targetDir=现场_DIR.'NFSOPLANK/klachten/';
//$targetDir=SITE_WEB_DIR.'nfsoplank/klachten/';
//$targetDir='...SITE_WEB_DIR.'nfsoplagk/klachten/';
$targetDir=“../../../NFSOPLANK/klachten”;
$cleanupTargetDir=false;//删除旧文件
$maxFileAge=5*3600;//以秒为单位的临时文件期限
//5分钟执行时间
@设置时间限制(5*60);
//取消注释此项以伪造上载时间
//美国LEEP(5000);
//获取参数
$chunk=isset($\u请求[“chunk”])?intval($\u请求[“chunk”]):0;
$chunks=isset($_请求[“chunks”])?intval($_请求[“chunks”]):0;
$fileName=isset($\u请求[“名称])?$\u请求[“名称]:”;
//出于安全原因,请清除文件名
$fileName=preg\u replace('/[^\w\.\u]+/'、'.\u'、$fileName);
//确保文件名是唯一的,但仅在禁用分块时
如果($chunks<2&&file_存在($targetDir.DIRECTORY_SEPARATOR.$fileName)){
$ext=strrpos($fileName,'.');
$fileName_a=substr($fileName,0,$ext);
$fileName_b=substr($fileName,$ext);
$count=1;
而(文件_存在($targetDir.DIRECTORY_SEPARATOR.$fileName_a.'.'.\u.$count.$fileName_b))
$count++;
$fileName=$fileName\u a.'.\u.$count.$fileName\u b;
}
$filePath=$targetDir.DIRECTORY_SEPARATOR.$fileName;
//创建目标目录
如果(!file_存在($targetDir))
@mkdir($targetDir);
//删除旧的临时文件
如果($cleanupTargetDir&&is_dir($targetDir)&($dir=opendir($targetDir))){
while(($file=readdir($dir))!==false){
$tmpfilePath=$targetDir.DIRECTORY\u SEPARATOR.$file;
//如果临时文件早于最大期限且不是当前文件,请删除该文件
if(preg_match('/\.part$/',$file)&&(filemtime($tmpfilePath)
主要是Plupload自定义上传的标准代码。它曾经与$targetDir=“../../../nfsopslank/klachten”一起使用;当我的代码在控制器之外,但在迁移到不再工作的开发环境之后
我试着在网上搜索,但没有找到解决方案。所以我被困在这个问题上了。有人有什么想法或建议吗?嗯,我发现代码首先是不完整的。其次,我们不想删除旧文件
// Remove old temp files
if ($cleanupTargetDir && is_dir($targetDir) && ($dir = opendir($targetDir))) {
while (($file = readdir($dir)) !== false) {
$tmpfilePath = $targetDir . DIRECTORY_SEPARATOR . $file;
// Remove temp file if it is older than the max age and is not the current file
if (preg_match('/\.part$/', $file) && (filemtime($tmpfilePath) < time() - $maxFileAge) && ($tmpfilePath != "{$filePath}.part")) {
@unlink($tmpfilePath);
}
}
closedir($dir);
} else
die('{"jsonrpc" : "2.0", "error" : {"code": 100, "message": "Failed to open temp directory."}, "id" : "id"}');