Sip 星号-如何更改实时分机中的铃声超时?
我使用星号11并尝试在MySQL实时扩展中更改响铃超时。自动挂断只需7~10秒。我检查了分机,结果是这样的 下面是asteriskrealtime mysql数据库中扩展表的屏幕显示Sip 星号-如何更改实时分机中的铃声超时?,sip,asterisk,Sip,Asterisk,我使用星号11并尝试在MySQL实时扩展中更改响铃超时。自动挂断只需7~10秒。我检查了分机,结果是这样的 下面是asteriskrealtime mysql数据库中扩展表的屏幕显示 SIP/5162860921,60 我把这个换成了 SIP/5162860921,300 然而,没有任何变化。如何将铃声超时延长到60秒 extensions.conf(我使用实时数据库) CLI日志 == Using SIP RTP CoS mark 5 -- Executing [2000@fro
SIP/5162860921,60
我把这个换成了
SIP/5162860921,300
然而,没有任何变化。如何将铃声超时延长到60秒
extensions.conf(我使用实时数据库)
CLI日志
== Using SIP RTP CoS mark 5
-- Executing [2000@from-sip:1] Dial("SIP/1000-00000000", "SIP/2000,30")
== Using SIP RTP CoS mark 5
-- Called SIP/2000
-- SIP/2000-00000001 is ringing
-- Got SIP response 486 "Busy here" back from 14.63.12.134:5060
-- SIP/2000-00000001 is busy
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing [2000@from-sip:2] Answer("SIP/1000-00000000", "2000@from-sip")
> 0x7fe6fc01bc00 -- Probation passed - setting RTP source address to 223.62.180.115:47204
-- Executing [2000@from-sip:3] hangup("SIP/1000-00000000", "")
== Spawn extension (from-sip, 2000, 3) exited non-zero on 'SIP/1000-00000000'
这是软电话应用的问题。我把它改为60秒,现在可以正常工作了。。SIP/1000,60是正确的。@AndréI使用实时数据库。因此extensions.conf中没有太多信息。数据库中的一行是什么样子的?@AndréI发布了屏幕截图。我想你错过了它,所以我重新发布了它:“你能在命令行上手动启动星号并以高详细度(-vvv在命令行上)发布它的输出吗?”添加更多详细度(-vvv”)在命令行上。
== Using SIP RTP CoS mark 5
-- Executing [2000@from-sip:1] Dial("SIP/1000-00000000", "SIP/2000,30")
== Using SIP RTP CoS mark 5
-- Called SIP/2000
-- SIP/2000-00000001 is ringing
-- Got SIP response 486 "Busy here" back from 14.63.12.134:5060
-- SIP/2000-00000001 is busy
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing [2000@from-sip:2] Answer("SIP/1000-00000000", "2000@from-sip")
> 0x7fe6fc01bc00 -- Probation passed - setting RTP source address to 223.62.180.115:47204
-- Executing [2000@from-sip:3] hangup("SIP/1000-00000000", "")
== Spawn extension (from-sip, 2000, 3) exited non-zero on 'SIP/1000-00000000'