Sockets 通过Wifi进行原始套接字通信-接收器无法接收数据包
我试图使用原始套接字将数据包从发送器发送到接收器。当我将发射机和接收机部署在Mac或朋友DellUbuntu 12.04上时，代码运行良好。我在两个不同的终端窗口中运行发射机和接收机，工作正常 但是，当我在一台机器上运行发射机，在另一台机器上运行接收机时，接收机不会接收任何数据包。有人能指出这个问题吗？我对套接字编程非常陌生，因此请原谅我犯的任何愚蠢的错误 发射机： /*函数使用sendto发送数据包*/Sockets 通过Wifi进行原始套接字通信-接收器无法接收数据包,sockets,raw-sockets,Sockets,Raw Sockets,我试图使用原始套接字将数据包从发送器发送到接收器。当我将发射机和接收机部署在Mac或朋友DellUbuntu 12.04上时，代码运行良好。我在两个不同的终端窗口中运行发射机和接收机，工作正常 但是，当我在一台机器上运行发射机，在另一台机器上运行接收机时，接收机不会接收任何数据包。有人能指出这个问题吗？我对套接字编程非常陌生，因此请原谅我犯的任何愚蠢的错误 发射机： /*函数使用sendto发送数据包*/ int SendPacket(int sockaddress,struct packet
int SendPacket(int sockaddress,struct packet *mypacket, int packet_len)
{
int sent= 0;
if((sent = write(sockaddress, mypacket, packet_len)) != packet_len)
{ return 0; }
else
{ return 1; }
}
int create_raw_socket(char *dev)
{
struct sockaddr_ll sll;
struct ifreq ifr;
int fd, ifi, rb;
bzero(&sll, sizeof(sll));
bzero(&ifr, sizeof(ifr));
fd = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
assert(fd != -1);
strncpy((char *)ifr.ifr_name, dev, IFNAMSIZ);
ifi = ioctl(fd, SIOCGIFINDEX, &ifr);
assert(ifi != -1);
sll.sll_protocol = htons(ETH_P_ALL);
sll.sll_family = PF_PACKET;
sll.sll_ifindex = ifr.ifr_ifindex;
sll.sll_pkttype = PACKET_OTHERHOST;
rb = bind(fd, (struct sockaddr *)&sll,sizeof(sll));
assert(rb != -1);
return fd;
}
int main(int argc, char**argv)
{
int x,fd,s;
int sockaddress,len;
char dest_packet[PACKET_LENGTH];
int count= atoi(argv[2]);
char ch;
struct packet mypacket;
struct ieee80211_radiotap_header ratap_header;
struct ieee80211_hdr_3addr iee802_header;
unsigned char addr1[ETH_ALEN] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
unsigned char addr2[ETH_ALEN] = {0x13,0x22,0x33,0x44,0x55,0x66};
unsigned char addr3[ETH_ALEN] = {0x13,0x22,0x33,0x44,0x55,0x66};
/* Radio tap header data */
ratap_header.it_version = 0x00;
ratap_header.it_pad = 0x00;
ratap_header.it_len = 0x06;
ratap_header.it_pad2 = 0x00;
ratap_header.it_present = 0x8000;
mypacket.rtap_header = ratap_header;
/* ieee80211 header data */
iee802_header.frame_ctl = 0x0801;
iee802_header.duration_id = 0x0000;
strcpy(iee802_header.addr1,addr1);
strcpy(iee802_header.addr2,addr2);
strcpy(iee802_header.addr3,addr3);
iee802_header.seq_ctl = 0x1086;
mypacket.iee802_header=iee802_header;
/* Payload */
unsigned char payload[PACKET_LENGTH]="test";
unsigned char stop_injection[5]="stop";
strcpy(mypacket.payload , payload);
len = sizeof(mypacket) ;
/* Sending the packet over the interface */
printf("\n Press Y to start packet injection \n");
while((ch = getchar()) != 'Y');
while((count--) > 0)
{
sockaddress = create_raw_socket(argv[1]);
if(!SendPacket(sockaddress, &mypacket, len))
perror("Error sending packet");
else
{
printf("Packet sent successfully with payload : %s\n" , mypacket.payload);
printf("\n size of the packet being send is %d \n " , len);
}
}
/* Packet to indicate the end of reception */
strcpy(mypacket.payload , stop_injection);
len = sizeof(mypacket) ;
int temp=SendPacket(sockaddress , &mypacket , len);
close(sockaddress);
printf("\n End of packet transmission ........................ \n");
return 0;
}
int main(int argc, char **argv)
{
struct sockaddr addr;
int sock_fd, fromlen,s;
char buf[PACKET_LENGTH];
char *dev = argv[1];
struct packet mypacket;
struct packet *ptr;
int recv_count=0;
sock_fd = create_raw_socket(dev); /* Creating the raw socket */
printf("\n Waiting to receive packets ........ \n");
while(1)
{
fromlen=sizeof(addr);
int x= recvfrom(sock_fd,&mypacket,sizeof(struct packet),0,&addr,&fromlen);
struct sockaddr_ll* temp;
temp = (struct sockaddr_ll*)(&addr);
if(temp->sll_pkttype == 4)
{
recv_count++;
if(strcmp(mypacket.payload , "stop") == 0)
break;
/* Payload received */
printf("\nPayload Received from client : %s \n ", mypacket.payload);
}
}
close(sock_fd);
return 0;
struct ieee80211_radiotap_header {
unsigned char it_version;
unsigned char it_pad;
uint16_t it_len;
uint16_t it_pad2;
uint32_t it_present;
};
/* Structure for 80211 header */
struct ieee80211_hdr_3addr {
uint16_t frame_ctl;
uint16_t duration_id;
unsigned char addr1[ETH_ALEN];
unsigned char addr2[ETH_ALEN];
unsigned char addr3[ETH_ALEN];
uint16_t seq_ctl;
} __attribute__ ((packed));
/* Structure of the packet containing the radiotap header, ieee802.11 header and payload
*/
struct packet {
struct ieee80211_radiotap_header rtap_header;
struct ieee80211_hdr_3addr iee802_header;
unsigned char payload[30];
};
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <pthread.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/sockios.h>
#include <net/ethernet.h> /* the L2 protocols */
#include <linux/if.h>
#include <linux/if_arp.h>
#include <arpa/inet.h>
#define NIC_NAME "wlan0"
/*our MAC address*/
static uint8_t gu8a_src_mac[6] = {0x11, 0x22, 0x33, 0x44 0x55, 0x66};
/*other host MAC address*/
static uint8_t gu8a_dest_mac[6] = {0x77, 0x88, 0x99, 0xAA, 0xBB, 0xCC};
int32_t get_nic_index (uint8_t *pu8_nic_card_name);
void* sock_recv_thread (void *p_arg);
int
main (void)
{
struct sockaddr_ll s_dest_addr;
int32_t s32_sock = -1;
int32_t s32_res = -1;
pthread_t ul_recv_thd_id = -1;
uint16_t u16_data_off = 0;
uint16_t u16_i = 0;
uint8_t *pu8a_frame = NULL;
uint8_t *pu8a_data = NULL;
printf ("Socket raw test\n");
(void) memset (&s_dest_addr, 0, sizeof (s_dest_addr));
pu8a_frame = (uint8_t *) calloc (ETH_FRAME_LEN, 1);
if( NULL == pu8a_frame )
{
printf ("Could not get memory for the transmit frame\n");
goto LABEL_CLEAN_EXIT;
}
u16_data_off = (uint16_t) (ETH_FRAME_LEN - ETH_DATA_LEN);
pu8a_data = pu8a_frame + u16_data_off;
s32_sock = socket (AF_PACKET, SOCK_RAW, htons (ETH_P_ALL));
if( -1 == s32_sock )
{
perror ("Could not create the socket");
goto LABEL_CLEAN_EXIT;
}
printf ("Socket created\n");
fflush (stdout);
(void) pthread_create (&ul_recv_thd_id, NULL, sock_recv_thread, &s32_sock);
sleep (1);
s_dest_addr.sll_family = AF_PACKET;
/*we don't use a protocol above ethernet layer, just use anything here*/
s_dest_addr.sll_protocol = htons(ETH_P_ALL);
s_dest_addr.sll_ifindex = get_nic_index ((uint8_t *) NIC_NAME);
s_dest_addr.sll_hatype = ARPHRD_ETHER;
s_dest_addr.sll_pkttype = PACKET_OTHERHOST; //PACKET_OUTGOING
s_dest_addr.sll_halen = ETH_ALEN;
/*MAC - begin*/
s_dest_addr.sll_addr[0] = gu8a_dest_mac[0];
s_dest_addr.sll_addr[1] = gu8a_dest_mac[1];
s_dest_addr.sll_addr[2] = gu8a_dest_mac[2];
s_dest_addr.sll_addr[3] = gu8a_dest_mac[3];
s_dest_addr.sll_addr[4] = gu8a_dest_mac[4];
s_dest_addr.sll_addr[5] = gu8a_dest_mac[5];
/*MAC - end*/
s_dest_addr.sll_addr[6] = 0x00;/*not used*/
s_dest_addr.sll_addr[7] = 0x00;/*not used*/
/*set the frame header*/
(void) memcpy (pu8a_frame, gu8a_dest_mac, ETH_ALEN);
(void) memcpy (pu8a_frame+ETH_ALEN , gu8a_src_mac, ETH_ALEN);
printf ("******Sending data using raw socket over '" NIC_NAME "'\n");
while( 1 )
{
(void) memset (&pu8a_data[u16_data_off], '\0', ETH_DATA_LEN);
(void) snprintf ((char *) &pu8a_data[u16_data_off],
ETH_DATA_LEN,
"Raw packet test, %d",
u16_i++);
s32_res = sendto (s32_sock,
pu8a_frame,
ETH_FRAME_LEN,
0,
(struct sockaddr*)&s_dest_addr,
sizeof(s_dest_addr));
if( -1 == s32_res )
{
perror ("Socket send failed");
goto LABEL_CLEAN_EXIT;
}
sleep (1);
}
/*printf ("Waiting for receive thread to exit\n");
pthread_join (ul_recv_thd_id, NULL);*/
LABEL_CLEAN_EXIT:
if( s32_sock > 0 )
{
close (s32_sock);
}
printf ("***** Raw Socket test- end\n");
return EXIT_SUCCESS;
}
void*
sock_recv_thread (void *p_arg)
{
struct sockaddr_ll s_src_addr;
int32_t s32_sock = * ((int32_t *)p_arg);
int32_t s32_res = -1;
uint16_t u16_data_off = 0;
uint8_t *pu8a_frame = NULL;
printf ("Socket receive thread\n");
u16_data_off = (uint16_t) (ETH_FRAME_LEN - ETH_DATA_LEN);
pu8a_frame = (uint8_t*) calloc (ETH_FRAME_LEN, 1);
if( NULL == pu8a_frame )
{
printf ("Could not get memory for the receive frame\n");
goto LABEL_CLEAN_EXIT;
}
(void) memset (&s_src_addr, 0, sizeof (s_src_addr));
s_src_addr.sll_family = AF_PACKET;
/*we don't use a protocol above ethernet layer, just use anything here*/
s_src_addr.sll_protocol = htons(ETH_P_ALL);
s_src_addr.sll_ifindex = get_nic_index ((uint8_t *) NIC_NAME);
s_src_addr.sll_hatype = ARPHRD_ETHER;
s_src_addr.sll_pkttype = PACKET_HOST;//PACKET_OTHERHOST;
s_src_addr.sll_halen = ETH_ALEN;
s32_res = bind (s32_sock,
(struct sockaddr *) &s_src_addr,
sizeof(s_src_addr));
if( -1 == s32_res )
{
perror ("Could not bind to the socket");
goto LABEL_CLEAN_EXIT;
}
printf ("Socket bind successful\n");
while( 1 )
{
struct sockaddr_ll s_sender_addr;
socklen_t u32_sender_addr_len = sizeof (s_sender_addr);
(void) memset (&s_sender_addr, 0, sizeof (s_sender_addr));
s32_res = recvfrom (s32_sock,
pu8a_frame,
ETH_FRAME_LEN,
0,
(struct sockaddr *) &s_sender_addr,
&u32_sender_addr_len);
if( -1 == s32_res )
{
perror ("Socket receive failed");
break;
}
else if( s32_res < 0 )
{
perror ("Socket receive, error ");
}
else
{
uint16_t u16_i = 0;
printf ("Received data from ");
for( u16_i=0; u16_i<sizeof(s_sender_addr.sll_addr)-2; u16_i++ )
{
printf ("%02x:", s_sender_addr.sll_addr[u16_i]);
}
printf ("\t");
printf ("Received data %s\n\n", &pu8a_frame[u16_data_off]);
}
}
LABEL_CLEAN_EXIT:
return (NULL);
}
int32_t
get_nic_index (uint8_t *pu8_nic_card_name)
{
int32_t s32_sock_fd = -1;
int32_t s32_res = -1;
struct ifreq s_ifr;
(void) memset (&s_ifr, 0, sizeof (s_ifr));
s32_sock_fd = socket (AF_INET, SOCK_DGRAM, 0);
if( -1 == s32_sock_fd )
{
perror ("get_nic_index(): socket failed");
goto LABEL_CLEAN_EXIT;
}
s_ifr.ifr_addr.sa_family = AF_INET;
strncpy(s_ifr.ifr_name, (char *) pu8_nic_card_name, IFNAMSIZ);
s32_res = ioctl(s32_sock_fd, SIOCGIFINDEX, &s_ifr);
if( -1 == s32_res )
{
perror ("get_nic_index(): ioctl failed");
}
close (s32_sock_fd);
LABEL_CLEAN_EXIT:
return (s_ifr.ifr_ifru.ifru_ivalue);
}