Nginx 路由器未拾取参数

我正在尝试让当前版本的Aura路由器与nginx一起工作

我正在使用文档中的nginx配置，并试图从工作中获得关闭路径

当我访问时，我收到您要求的日志条目0的消息

我的nginx配置如下所示：

 server {
      listen   80;
      root /code/public;
      index index.php index.html index.htm;
      server_name localhost;

      error_log  /var/log/nginx/error.log;
      access_log /var/log/nginx/access.log;

      location / {
          try_files $uri $uri/ /index.php?$args;
      }

      error_page 404 /404.html;

      location ~ \.php$ {

          fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
          fastcgi_param  QUERY_STRING       $query_string;
          fastcgi_param  REQUEST_METHOD     $request_method;
          fastcgi_param  CONTENT_TYPE       $content_type;
          fastcgi_param  CONTENT_LENGTH     $content_length;

          fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
          fastcgi_param  REQUEST_URI        $request_uri;
          fastcgi_param  DOCUMENT_URI       $document_uri;
          fastcgi_param  DOCUMENT_ROOT      $document_root;
          fastcgi_param  SERVER_PROTOCOL    $server_protocol;
          fastcgi_param  HTTPS              $https if_not_empty;

          fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
          fastcgi_param  SERVER_SOFTWARE    nginx/$nginx_version;

          fastcgi_param  REMOTE_ADDR        $remote_addr;
          fastcgi_param  REMOTE_PORT        $remote_port;
          fastcgi_param  SERVER_ADDR        $server_addr;
          fastcgi_param  SERVER_PORT        $server_port;
          fastcgi_param  SERVER_NAME        $server_name;

          # PHP only, required if PHP was built with --enable-force-cgi-redirect
          fastcgi_param  REDIRECT_STATUS    200;

          fastcgi_pass php:9000;
          try_files $uri =404;
      }
  }

---

我不认为这与Aura.Router有关。机罩下的Aura.Router V3.x使用Zend framework diactoros Nothing，diactoros也使用：-

您可以看到如何进行匹配：

您的nginx似乎存在一些配置问题。路由器也不例外，所以几乎所有适用于Symfony、Slim等的配置都应该稍作改动。配置是从中复制的

这就是我试过的

server {
    listen 80;
    server_name aurarouter.com;
    root /var/www/projects/aura-router-test;
    index index.php index.html index.htm;

    location / {        
        try_files $uri @rewriteapp;
    }

    location @rewriteapp {
        rewrite ^(.*)$ /index.php/$1 last;
    }

    location ~ [^/]\.php(/|$) {
        fastcgi_split_path_info ^(.+?\.php)(/.*)$;
        if (!-f $document_root$fastcgi_script_name) {
          return 404;
        }
        fastcgi_param  QUERY_STRING       $query_string;
        # copied from fastcgi_params, normally
        # include fastcgi_params;
        fastcgi_param  REQUEST_METHOD     $request_method;
        fastcgi_param  CONTENT_TYPE       $content_type;
        fastcgi_param  CONTENT_LENGTH     $content_length;

        fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
        fastcgi_param  REQUEST_URI        $request_uri;
        fastcgi_param  DOCUMENT_URI       $document_uri;
        fastcgi_param  DOCUMENT_ROOT      $document_root;
        fastcgi_param  SERVER_PROTOCOL    $server_protocol;
        fastcgi_param  REQUEST_SCHEME     $scheme;
        fastcgi_param  HTTPS              $https if_not_empty;

        fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
        fastcgi_param  SERVER_SOFTWARE    nginx/$nginx_version;

        fastcgi_param  REMOTE_ADDR        $remote_addr;
        fastcgi_param  REMOTE_PORT        $remote_port;
        fastcgi_param  SERVER_ADDR        $server_addr;
        fastcgi_param  SERVER_PORT        $server_port;
        fastcgi_param  SERVER_NAME        $server_name;

        # PHP only, required if PHP was built with --enable-force-cgi-redirect
        fastcgi_param  REDIRECT_STATUS    200;
        # copied from fastcgi_params

        fastcgi_index index.php;
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        fastcgi_pass unix:/run/php/php7.0-fpm.sock;
    }

    location ~ /\.ht {
        deny all;
    }

}

所以如果你仔细看的话，我认为fastcgi\u split\u path\u信息是你这边似乎缺少的东西

---

希望这能有所帮助。

我不是nginx大师，所以我也使用了来自的一些信息。如果有人觉得这可以做得更好，请随意编辑。