SNMP不支持的安全级别
我正在尝试配置snmp守护进程,但似乎遇到了一些困难。每当我尝试运行以下命令时:SNMP不支持的安全级别,snmp,snmpd,Snmp,Snmpd,我正在尝试配置snmp守护进程,但似乎遇到了一些困难。每当我尝试运行以下命令时: snmpget -u bootstrap -l authPriv -a MD5 -x DES -A temp_password -X temp_password remote_host 1.3.6.1.2.1.1.1.0 我得到一个错误声明: snmpget: Unsupported security level 我一直在关注本教程:。我读了一些书,发现我在创建用户方面失败了。我把我使用的代码写在下面: ###
snmpget -u bootstrap -l authPriv -a MD5 -x DES -A temp_password -X temp_password remote_host 1.3.6.1.2.1.1.1.0
我得到一个错误声明:
snmpget: Unsupported security level
我一直在关注本教程:。我读了一些书,发现我在创建用户方面失败了。我把我使用的代码写在下面:
###############################################################################
#
# SNMPv3 AUTHENTICATION
#
# Note that these particular settings don't actually belong here.
# They should be copied to the file /var/lib/snmp/snmpd.conf
# and the passwords changed, before being uncommented in that file *only*.
# Then restart the agent
# createUser authOnlyUser MD5 "remember to change this password"
# createUser authPrivUser SHA "remember to change this one too" DES
# createUser internalUser MD5 "this is only ever used internally, but still change the password"
# If you also change the usernames (which might be sensible),
# then remember to update the other occurances in this example config file to match.
###############################################################################
#
# ACCESS CONTROL
#
# system + hrSystem groups only
view systemonly included .1.3.6.1.2.1.1
view systemonly included .1.3.6.1.2.1.25.1
# Full access from the local host
rocommunity public localhost
# rocommunity public
# Default access to basic system info
rocommunity public default -V systemonly
# rocommunity6 is for IPv6
rocommunity6 public default -V systemonly
# Full access from an example network
# Adjust this network address to match your local
# settings, change the community string,
# and check the 'agentAddress' setting above
#rocommunity secret 10.0.0.0/16
# Full read-only access for SNMPv3
rouser authOnlyUser
# Full write access for encrypted requests
# Remember to activate the 'createUser' lines above
# create temporary user
createUser bootstrap MD5 "temp_password" DES
# set up level of acccess that user will have. allow for read write access
rwuser bootstrap priv
rwuser demo priv
#rwuser authPrivUser priv
我相信我已经正确创建了用户,并通过rwuser命令提供了正确的授权。如果您能帮助我进一步调试代码,我们将不胜感激。我想这是因为这句话:
rwuser bootstrap priv
应该是这样的:
rwuser bootstrap authPriv
如果您为用户指定了什么“安全级别”,他只能使用该“安全级别”进行身份验证您应该使用net snmp命令行创建用户,而不是在不知道如何创建用户时手动编辑。