根目录上的Apache身份验证，但不在/index.html上

我已将httpd.conf设置为从身份验证中排除index.html。 它非常适用于，但仍然需要身份验证，即使index.html是通过以下方式显示的：

<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

DirectoryIndex.html

请帮忙

这是我的httpd.conf：

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#LockFile logs/accept.lock
</IfModule>
</IfModule>

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
<IfModule !mpm_netware.c>
PidFile logs/httpd.pid
</IfModule>

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers         5
MinSpareServers      5
MaxSpareServers     10
MaxClients         150
MaxRequestsPerChild  1
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers         2
MaxClients         150
MinSpareThreads     25
MaxSpareThreads     75 
ThreadsPerChild     25
MaxRequestsPerChild  0
</IfModule>

# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
NumServers           5
StartThreads         5
MinSpareThreads      5
MaxSpareThreads     10
MaxThreadsPerChild  20
MaxRequestsPerChild  0
</IfModule>

# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild  0
</IfModule>

# BeOS MPM
# StartThreads: how many threads do we initially spawn?
# MaxClients:   max number of threads we can have (1 thread == 1 client)
# MaxRequestsPerThread: maximum number of requests each thread will process
<IfModule beos.c>
StartThreads               10
MaxClients                 50
MaxRequestsPerThread       10000
</IfModule>    

# NetWare MPM
# ThreadStackSize: Stack size allocated for each worker thread
# StartThreads: Number of worker threads launched at server startup
# MinSpareThreads: Minimum number of idle threads, to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# MaxThreads: Maximum number of worker threads alive at the same time
# MaxRequestsPerChild: Maximum  number of requests a thread serves. It is 
#                      recommended that the default value of 0 be set for this
#                      directive on NetWare.  This will allow the thread to 
#                      continue to service requests indefinitely.                          
<IfModule mpm_netware.c>
ThreadStackSize      65536
StartThreads           250
MinSpareThreads         25
MaxSpareThreads        250
MaxThreads            1000
MaxRequestsPerChild      0
</IfModule>

# OS/2 MPM
# StartServers: Number of server processes to maintain
# MinSpareThreads: Minimum number of idle threads per process, 
#                  to handle request spikes
# MaxSpareThreads: Maximum number of idle threads per process
# MaxRequestsPerChild: Maximum number of connections per server process
<IfModule mpmt_os2.c>
StartServers           2
MinSpareThreads        5
MaxSpareThreads       10
MaxRequestsPerChild    0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80

Listen 80


### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000; 
#  don't use Group #-1 on these systems!
#
User nobody
Group #-1
</IfModule>
</IfModule>

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@your.address

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make 
# redirections work in a sensible way.
#
#ServerName new.host.name:80

#
# UseCanonicalName: Determines how Apache constructs self-referencing 
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/webroot/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    AuthName Heatpump
    AuthType Digest
    AuthDigestFile /var/webroot/.htdigest
    AuthDigestGroupFile /var/webroot/.htgroup    
    Require valid-user
    Satisfy All
    Options FollowSymLinks
    AllowOverride All
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/webroot/htdocs">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
#
    Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride All

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
UserDir public_html

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the 
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride 
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig conf/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/var/log/httpd/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "/var/log/httpd/access_log" common

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Full

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory 
# listings, mod_status and mod_info output etc., but not CGI generated 
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is 
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the 
# realname must also be slash terminated, and if the fakename omits the 
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/webroot/icons/"

<Directory "/var/webroot/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/webroot/cgi-bin/"

<IfModule mod_cgid.c>
#
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#
#Scriptsock            logs/cgisock
</IfModule>

#
# "/var/webroot/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/webroot/cgi-bin">
    AllowOverride All
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Directives controlling the display of server-generated directory listings.
#

#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing VersionSort

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
#
AddDefaultCharset ISO-8859-1

#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
#
AddCharset ISO-8859-1  .iso8859-1  .latin1
AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
AddCharset ISO-8859-3  .iso8859-3  .latin3
AddCharset ISO-8859-4  .iso8859-4  .latin4
AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5        .Big5       .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251   .win-1251
AddCharset CP866       .cp866
AddCharset KOI8-r      .koi8-r .koi8-ru
AddCharset KOI8-ru     .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8       .utf8

# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
#
# See http://www.iana.org/assignments/character-sets
# for a list of sorts. But browsers support few.
#
AddCharset GB2312      .gb2312 .gb 
AddCharset utf-7       .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
AddType application/x-tar .tgz
AddType image/x-icon .ico

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
#
AddHandler type-map var

#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a 
# problem with Microsoft WebFolders which does not appropriately handle 
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully

#
# Bring in additional module-specific configurations
#
<IfModule mod_ssl.c>
    Include conf/ssl.conf
</IfModule>

<Directory "/var/webroot/htdocs">
    Options Indexes MultiViews
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>

#
#ServerRoot：目录树的顶部，服务器的
#保留配置、错误和日志文件。
#
#注意！如果要将其放置在NFS（或其他网络）上
#安装的文件系统然后请阅读LockFile文档（可用
#at）；
#你会省去很多麻烦。
#
#不要在目录路径的末尾添加斜杠。
#
ServerRoot“/etc/httpd”
#
#接受序列化锁定文件必须存储在本地磁盘上。
#
#LockFile日志/accept.lock
#
#PidFile：服务器应在其中记录其进程的文件
#启动时的标识号。
#
pid文件日志/httpd.pid
#
#超时：接收和发送超时之前的秒数。
#
超时300
#
#KeepAlive：是否允许持久连接（超过
#每个连接一个请求）。设置为“关闭”以停用。
#
继续
#
#MaxKeepAliverRequests：允许的最大请求数
#在持久连接期间。设置为0以允许无限量。
#我们建议您将此数字保持在较高水平，以获得最佳性能。
#
MaxKeepAliveRequests 100
#
#KeepAliveTimeout：等待来自的下一个请求的秒数
#同一连接上的同一客户端。
#
暂停15分钟
##
##服务器池大小调节（特定于MPM）
## 
#预工作MPM
#StartServers：要启动的服务器进程数
#MinSpareServers：保留备用的最小服务器进程数
#MaxSpareServers：保留备用的最大服务器进程数
#MaxClient:允许启动的最大服务器进程数
#MaxRequestsPerChild：服务器进程服务的最大请求数
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 1
#工人MPM
#StartServers：要启动的服务器进程的初始数目
#MaxClients：同时进行的客户端连接的最大数量
#MinSpareThreads：保留备用的最小工作线程数
#MaxSpareThreads：保留备用的最大工作线程数
#ThreadsParchild：每个服务器进程中工作线程的固定数量
#MaxRequestsPerChild：服务器进程服务的最大请求数
StartServers 2
MaxClients 150
Minspare25
MaxSpareThreads 75
螺纹预裂25
MaxRequestsPerChild 0
#Percild MPM
#numserver：服务器进程的固定数量
#StartThreads：每个服务器进程中工作线程的初始数量
#MinSpareThreads：保留备用的最小工作线程数
#MaxSpareThreads：保留备用的最大工作线程数
#MaxThreadsPerChild：每个服务器进程中的最大工作线程数
#MaxRequestsPerChild：每个服务器进程的最大连接数
NumServers 5
开始线程5
Minspare5
MaxSpareThreads 10
MaxThreadsPerChild 20
MaxRequestsPerChild 0
#温特MPM
#ThreadsPerChild：服务器进程中工作线程的固定数量
#MaxRequestsPerChild：服务器进程服务的最大请求数
螺纹预裂250
MaxRequestsPerChild 0
#BeOS MPM
#StartThreads：我们最初生成多少线程？
#MaxClient:我们可以拥有的最大线程数（1个线程==1个客户端）
#MaxRequestsPerThread：每个线程将处理的最大请求数
开始线程10
MaxClients 50
MaxRequestsPerThread 10000
#NetWare MPM
#ThreadStackSize：为每个工作线程分配的堆栈大小
#StartThreads：服务器启动时启动的工作线程数
#MinSpareThreads：处理请求峰值的最小空闲线程数
#MaxSpareThreads：空闲线程的最大数量
#MaxThreads：同时活动的最大工作线程数
#MaxRequestsPerChild：线程服务的最大请求数。它是
#建议为此设置默认值0
#NetWare上的指令。这将允许线程
#继续无限期地为请求提供服务。
螺纹尺寸65536
StartThreads 250
Minspare25
MaxSpareThreads 250
MaxThreads 1000
MaxRequestsPerChild 0
#OS/2 MPM
#StartServers：要维护的服务器进程数
#MinSpareThreads：每个进程的最小空闲线程数，
#处理请求峰值
#MaxSpareThreads：每个进程的最大空闲线程数
#MaxRequestsPerChild：每个服务器进程的最大连接数
StartServers 2
Minspare5
MaxSpareThreads 10
MaxRequestsPerChild 0
#
#侦听：允许您将Apache绑定到特定的IP地址和/或
#端口，而不是默认端口。另见
#指令。
#
#将此更改为侦听特定IP地址，如下所示
#防止Apache欺骗所有绑定的IP地址（0.0.0.0）
#
#听12.34.56.78:80
听80
###第2节：“主”服务器配置
#
#本节中的指令设置“main”使用的值
#服务器，它响应任何未由服务器处理的请求
#定义。这些值还提供了的默认值
#稍后在文件中定义的任何容器。
#
#所有这些指令都可能出现在容器中，
#在这种情况下，这些默认设置将被
#正在定义的虚拟主机。
#
#
#如果希望httpd作为其他用户或组运行，则必须运行
#httpd最初作为root，它将切换。
#
#用户/组：要作为运行httpd的用户/组的名称（或#编号）。
#  . 在SCO（ODT3）上，使用“用户nouser”和“组nogroup”。
#  . 关于HPU
<Files ~ "(index.html)">
        Satisfy Any
        Order Deny,Allow
        Allow from all
</Files>

<Files ~ "">
        Satisfy Any
        Order Deny,Allow
        Allow from all
</Files>