Docker 在Linux上安装DPDK时出错_Docker_Alpine_Dpdk

Docker 在Linux上安装DPDK时出错

docker

Docker 在Linux上安装DPDK时出错,docker,alpine,dpdk,Docker,Alpine,Dpdk,我正在尝试在Alpine Linux上安装DPDK。我正在Docker中运行Alpine Linux。以下是我正在使用的步骤： docker-pull-alpine docker-run-it-alpine/bin/sh wgethttps://git.dpdk.org/dpdk-stable/snapshot/dpdk-stable-16.11.8.tar.gz tar-xzf dpdk-stable-16.11.8.tar.gz cd-dpdk-stable-16.11.8 apk add-

我正在尝试在Alpine Linux上安装

DPDK

。我正在Docker中运行Alpine Linux。以下是我正在使用的步骤：

docker-pull-alpine

docker-run-it-alpine/bin/sh

wgethttps://git.dpdk.org/dpdk-stable/snapshot/dpdk-stable-16.11.8.tar.gz

tar-xzf dpdk-stable-16.11.8.tar.gz

cd-dpdk-stable-16.11.8

apk add--无缓存使gcc libc dev bsd compat headers linux headers musl dev

apk添加numactl dev--更新缓存--存储库http://dl-3.alpinelinux.org/alpine/edge/testing/ --允许不受信任

make install T=x86\u 64-native-linuxapp-gcc

安装失败，出现以下错误和警告：

make[5]：对“depdirs”不做任何事情

配置完成

==构建库

==构建库/库兼容

==构建库/库

==构建库/librte\u eal/common

==构建库/librte\u eal/linuxapp

==构建库/librte_eal/linuxapp/eal

抄送eal_hugepage_info.o

/dpdk/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_hugepage_info.c:在函数“clear_hugedir”中：

/dpdk/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_hugepage_info.c:229:8：警告：函数“openat”的隐式声明；你是说波本吗？[-Wimplicit函数声明] fd=openat（dir\u fd，dirent->d\u name，O\u RDONLY）； ^~~~~~ 波本

/dpdk/dpdk-stable-16.11.8/lib/librte_-eal/linuxapp/eal/eal_-hugepage_-info.c:229:8：警告：“openat”的嵌套外部声明[-拥有的外部程序]

/dpdk/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_hugepage_info.c:229:39：错误：“O_RDONLY”未声明（此函数首次使用） fd=openat（dir\u fd，dirent->d\u name，O\u RDONLY）； ^~~~~~~~ /dpdk/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_hugepage_info.c:229:39：注意：每个未声明的标识符对于它出现在其中的每个函数只报告一次

/dpdk/dpdk-stable-16.11.8/lib/librte_-eal/linuxapp/eal/eal_-hugepage_-info.c：在函数“eal_-hugepage_-info_init”中：

/dpdk/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_hugepage_info.c:320:26：警告：隐式声明函数“打开”；你是说波本吗？[-Wimplicit函数声明] hpi->lock_descriptor=open（hpi->hugedir，仅限O_rdo）； ^~~~ 波本

/dpdk/dpdk-stable-16.11.8/lib/librte_-eal/linuxapp/eal/eal_-hugepage_-info.c:320:26：警告：嵌套的外部声明为“打开”[-拥有的外部声明]

/dpdk/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_hugepage_info.c:320:45：错误：“O_RDONLY”未声明（首次用于此函数） hpi->lock_descriptor=open（hpi->hugedir，仅限O_rdo）； ^~~~~~~~

make[7]：***[/dpdk/dpdk-stable-16.11.8/mk/internal/rte.compile pre.mk:140:eal_hugepage_info.o]错误1

make[6]：***[/dpdk/dpdk-stable-16.11.8/mk/rte.subdir.mk:63:eal]错误2

make[5]：***[/dpdk/dpdk-stable-16.11.8/mk/rte.subdir.mk:63:linuxapp]错误2

make[4]：***[/dpdk/dpdk-stable-16.11.8/mk/rte.subdir.mk:63:librte_eal]错误2

make[3]：***[/dpdk/dpdk-stable-16.11.8/mk/rte.sdkbuild.mk:80:lib]错误2

make[2]：***[/dpdk/dpdk-stable-16.11.8/mk/rte.sdkroot.mk:127:all]错误2

make[1]：***[/dpdk/dpdk-stable-16.11.8/mk/rte.sdkinstall.mk:86:预安装]错误2

make:**[/dpdk/dpdk-stable-16.11.8/mk/rte.sdkroot.mk:101:安装]错误2

更新1

我修复了一些错误，但现在出现了新的错误。以下是更新的步骤：

docker-pull-alpine

docker-run-it-alpine/bin/sh

wgethttps://git.dpdk.org/dpdk-stable/snapshot/dpdk-stable-16.11.8.tar.gz

tar-xzf dpdk-stable-16.11.8.tar.gz

cd-dpdk-stable-16.11.8

apk add--无缓存使gcc libc dev bsd compat headers linux headers musl dev

apk添加numactl dev--更新缓存--存储库http://dl-3.alpinelinux.org/alpine/edge/testing/ --允许不受信任

将

#include

添加到

lib/librte_eal/common/include/rte_common.h

将

CFLAGS+=-D_GNU_SOURCE

添加到

lib/librte_eal/linuxapp/eal/Makefile

make install T=x86\u 64-native-linuxapp-gcc

安装现在失败，出现以下错误：

make[5]：对“depdirs”不做任何事情。配置完成

==构建库

==构建库/库兼容

==构建库/库

==构建库/librte\u eal/common

==构建库/librte\u eal/linuxapp

==构建库/librte_eal/linuxapp/eal

CC eal\u vfio\u mp\u sync.o

/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c：在函数“vfio_mp_sync_send_fd”中：

/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c:75:17:错误：“struct cmsghdr”没有名为“_cmsg_data”的成员 memcpy（（chdr）。u cmsg_数据和（fd），sizeof（fd））\ ^

/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c:187:2：注意：在宏“FD_”到“CMSGHDR”的扩展中 FD_至CMSGHDR（FD，*chdr）； ^~~~~~~~~~~~~

/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c：在函数“vfio_mp_sync_receive_fd”中：

/dpdk-stable-16.11.8/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c:78:24:错误：“struct cmsghdr”没有名为“_cmsg_data”的成员 memcpy（&（fd），（chdr）。uu cmsg_u数据，sizeof（fd）） ^

/dpdk刺

/* Structure used for storage of ancillary data object information.  */
struct cmsghdr
{
    size_t cmsg_len;
    /* Length of data in cmsg_data plus length
       of cmsghdr structure.
       !! The type should be socklen_t but the
       definition of the kernel is incompatible
       with this.  */
    int cmsg_level;     /* Originating protocol.  */
    int cmsg_type;      /* Protocol specific type.  */
#if __glibc_c99_flexarr_available
    __extension__ unsigned char __cmsg_data __flexarr; /* Ancillary data.  */
#endif
};

/* Structure used for storage of ancillary data object information.  */
struct cmsghdr
  {
    size_t cmsg_len;            /* Length of data in cmsg_data plus length
                                   of cmsghdr structure.
                                   !! The type should be socklen_t but the
                                   definition of the kernel is incompatible
                                   with this.  */
    int cmsg_level;             /* Originating protocol.  */
    int cmsg_type;              /* Protocol specific type.  */
#if (!defined __STRICT_ANSI__ && __GNUC__ >= 2) || __STDC_VERSION__ >= 199901L
    __extension__ unsigned char __cmsg_data __flexarr; /* Ancillary data.  */
#endif
  };

struct cmsghdr {
        socklen_t cmsg_len;
        int __pad1;
        int cmsg_level;
        int cmsg_type;
};

FROM alpine:latest

ARG DPDK_VER=16.11.8
ARG KERNEL_VER=4.9.4

RUN wget https://git.dpdk.org/dpdk-stable/snapshot/dpdk-stable-$DPDK_VER.tar.gz && \
    tar -xzf dpdk-stable-$DPDK_VER.tar.gz && \
    \
    # Install Alpine packages
    apk add --no-cache make gcc linux-headers bsd-compat-headers binutils coreutils diffutils && \
    apk add --no-cache gettext bash grep sed texinfo perl util-linux vim build-base libexecinfo libexecinfo-dev && \
    apk add --no-cache abuild bc cmake ncurses-dev ca-certificates wget && \
    apk add numactl-dev --update-cache --repository http://dl-3.alpinelinux.org/alpine/edge/testing/ --allow-untrusted && \
    \
    # Enable usage of High Precision Timers
    sed -i "/\b\(CONFIG_RTE_LIBEAL_USE_HPET\|n\)\b/d" /dpdk-stable-$DPDK_VERSION/config/common_base && \
    sed -ie '/CONFIG_RTE_LOG_HISTORY=256/a CONFIG_RTE_LIBEAL_USE_HPET=y' /dpdk-stable-$DPDK_VERSION/config/common_base && \
    \
    # Add following lines / workarounds to header files 
    sed -ie '/int cmsg_type;/a unsigned char __cmsg_data;' /usr/include/bits/socket.h && \
    sed -i.old '1s;^;#include <fcntl.h>\n;' /dpdk-stable-$DPDK_VER/lib/librte_eal/common/include/rte_common.h && \
    sed -ie '/#define _VNIC_DEVCMD_H_/a typedef u32 u_int32_t;' /dpdk-stable-$DPDK_VER/drivers/net/enic/base/vnic_devcmd.h && \
    \
    # Prevent usage of the header files on /usr/include/fortify path by deleting them
    # Instead of them header files from /usr/include path will be used
    rm -rf /usr/include/fortify/* && \
    \
    # Add CFLAGS += -D_GNU_SOURCE to the following Makefiles
    cd /dpdk-stable-$DPDK_VER && \
    sed -ie '/CFLAGS/a CFLAGS += -D_GNU_SOURCE' lib/librte_ring/Makefile && \
    sed -ie '/CFLAGS/a CFLAGS += -D_GNU_SOURCE' lib/librte_mempool/Makefile && \
    sed -ie '/CFLAGS/a CFLAGS += -D_GNU_SOURCE' lib/librte_mbuf/Makefile && \
    sed -ie '/CFLAGS/a CFLAGS += -D_GNU_SOURCE' lib/librte_timer/Makefile && \
    sed -ie '/CFLAGS/a CFLAGS += -D_GNU_SOURCE' lib/librte_net/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_eal/linuxapp/eal/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_ether/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_cryptodev/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_vhost/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_hash/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_lpm/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_acl/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_ip_frag/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_sched/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_distributor/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_kni/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_port/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_table/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_pipeline/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' lib/librte_reorder/Makefile && \
    \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/af_packet/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/bonding/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/cxgbe/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/e1000/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/ena/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/enic/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/fm10k/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/i40e/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/ixgbe/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/bnxt/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/null/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/qede/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/ring/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/virtio/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/vmxnet3/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/net/vhost/Makefile && \
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' drivers/crypto/null/Makefile && \
    \
    # Enable tests for compiling
    sed -ie '/EXECENV_LDLIBS  += -ldl/a EXECENV_LDLIBS  += -lexecinfo' mk/exec-env/linuxapp/rte.vars.mk && \
    sed -ie '/#include <string.h>/a #include <features.h>' lib/librte_eal/linuxapp/eal/eal_pci_uio.c && \
    sed -ie '/#define OFF_MAX/a static inline void outb_p (unsigned char __value, unsigned short int __port) { __asm__ __volatile__ ("outb %b0,%w1\\noutb %%al,$0x80": :"a" (__value), "Nd" (__port)); }' lib/librte_eal/linuxapp/eal/eal_pci_uio.c && \
    sed -ie '/#define OFF_MAX/a static inline void outw_p (unsigned short int __value, unsigned short int __port) { __asm__ __volatile__ ("outw %w0,%w1\\noutb %%al,$0x80": :"a" (__value), "Nd" (__port)); }' lib/librte_eal/linuxapp/eal/eal_pci_uio.c && \
    sed -ie '/#define OFF_MAX/a static inline void outl_p (unsigned int __value, unsigned short int __port) { __asm__ __volatile__ ("outl %0,%w1\\noutb %%al,$0x80": :"a" (__value), "Nd" (__port)); }' lib/librte_eal/linuxapp/eal/eal_pci_uio.c && \
    # - test
    sed -ie '/LDLIBS += -lm/a LDLIBS += -lrte_pmd_ring -lrte_pmd_null' app/test/Makefile && \
    # - test-acl
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' app/test-acl/Makefile && \
    # - test-pipeline
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' app/test-pipeline/Makefile && \
    # - test-pmd
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' app/test-pmd/Makefile && \
    sed -ie '/DEPDIRS-y += lib drivers/a LDLIBS += -lrte_pmd_ixgbe' app/test-pmd/Makefile && \
    sed -ie '/typedef uint16_t streamid_t/a typedef unsigned int uint;' app/test-pmd/testpmd.h && \
    # - proc_info
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' app/proc_info/Makefile && \
    # - pdump
    sed -ie '/CFLAGS += $(WERROR_FLAGS)/a CFLAGS += -D_GNU_SOURCE' app/pdump/Makefile && \
    cd / && \
    \
    # Install missing Alpine Linux kernel modules
    wget -nv -P /srv https://www.kernel.org/pub/linux/kernel/v4.x/linux-$KERNEL_VER.tar.gz && \
    tar -C /srv -zxf /srv/linux-$KERNEL_VER.tar.gz && \
    cd /srv/linux-$KERNEL_VER && \
    make defconfig && \
    ([ ! -f /proc/1/root/proc/config.gz ] || zcat /proc/1/root/proc/config.gz > .config) && \
    echo 'CONFIG_USB=m' >> .config && \
    echo 'CONFIG_USB_HID=m' >> .config && \
    echo 'CONFIG_USB_SUPPORT=y' >> .config && \
    echo 'CONFIG_USB_COMMON=m' >> .config && \
    echo 'CONFIG_USB_ARCH_HAS_HCD=y' >> .config && \
    echo 'CONFIG_USB_DEFAULT_PERSIST=y' >> .config && \
    echo 'CONFIG_USBIP_CORE=m' >> .config && \
    echo 'CONFIG_USBIP_VHCI_HCD=m' >> .config && \
    echo 'CONFIG_USBIP_VHCI_HC_PORTS=8' >> .config && \
    echo 'CONFIG_USBIP_VHCI_NR_HCS=1' >> .config && \
    echo 'CONFIG_USBIP_HOST=m' >> .config && \
    sed -i'.bak' '/hcd->amd_resume_bug/{s/^/\/\//;n;s/^/\/\//}' ./drivers/usb/core/hcd-pci.c && \
    make oldconfig && \
    make modules_prepare && \
    make modules && \
    make modules_install && \
    make clean && \
    cd / && \
    \
    # Install DPDK
    mkdir /dpdk-build && \
    cd dpdk-stable-$DPDK_VER && \
    make install T=x86_64-native-linuxapp-gcc RTE_KERNELDIR=/srv/linux-$KERNEL_VER DESTDIR=/dpdk-build