如何将Pyserial读取数据导出到文本文件或Matlab中

我是Pyserial的新手，我目前正在使用它从微控制器读取大量数据，数据格式类似于（1,2,3,4，…），我想将这些数据保存到文本文件或Matlab中，我应该如何实现？谢谢

这里有一个链接，指向我创建的一个存储库，总结了实现这一点的各种方法：

描述如下

---

PySerial Pyserial是一种从Arduino获取数据的极好方法，它既健壮又易于实现

下面的示例展示了一种非常简单的方法，可以帮助您开始

但是，请注意arduino不会不断地向您的程序发送数据——您可能会遇到缓冲区填充过多的错误。

素描 #先试试这个，感受一下pyserial

naive.py

import serial

ser = serial.Serial('/dev/ttyACM0',115200)

f = open('dataFile.txt','a')

while 1 :
    f.write(ser.readline())
    f.close()
    f = open('dataFile.txt','a')

#!/usr/bin/python
import serial, time
ser = serial.Serial('/dev/ttyACM0',  115200, timeout = 0.1)

#if you only want to send data to arduino (i.e. a signal to move a servo)
def send( theinput ):
  ser.write( theinput )
  while True:
    try:
      time.sleep(0.01)
      break
    except:
      pass
  time.sleep(0.1)

#if you would like to tell the arduino that you would like to receive data from the arduino
def send_and_receive( theinput ):
  ser.write( theinput )
  while True:
    try:
      time.sleep(0.01)
      state = ser.readline()
      print state
      return state
    except:
      pass
  time.sleep(0.1)

f = open('dataFile.txt','a')

while 1 :
    arduino_sensor = send_and_receive('1')
    f.write(arduino_sensor)
    f.close()
    f = open('dataFile.txt','a')

天真无邪。ino

void setup() {
  Serial.begin(115200);
}

void loop() {
  Serial.println(analogRead(A0));
  delay(1000);
}

void setup () {   pinMode(13, OUTPUT);   Serial.begin(115200); } 
    void loop() {

  if (Serial.available())    {

     ch = Serial.read();

     if ( ch == '1' ) { 
       Serial.println(analogRead(A0)); // if '1' is received, then send back analog read A0
     } 
     else if (ch == '2') {    
       digitalWrite(13,HIGH); // if '2' is received, turn on the led attached to 13
     } 
     else if (ch == '3') {
       digitalWrite(13,LOW); // if '3' is received then turn off the led attached 13
     } else {
       delay(10);
     }
   }    
}

健壮的Pyserial和Sketch

当您准备好时，考虑在您的Python程序提示时，ARDUIO只发送数据：

8robust.py

import serial

ser = serial.Serial('/dev/ttyACM0',115200)

f = open('dataFile.txt','a')

while 1 :
    f.write(ser.readline())
    f.close()
    f = open('dataFile.txt','a')

#!/usr/bin/python
import serial, time
ser = serial.Serial('/dev/ttyACM0',  115200, timeout = 0.1)

#if you only want to send data to arduino (i.e. a signal to move a servo)
def send( theinput ):
  ser.write( theinput )
  while True:
    try:
      time.sleep(0.01)
      break
    except:
      pass
  time.sleep(0.1)

#if you would like to tell the arduino that you would like to receive data from the arduino
def send_and_receive( theinput ):
  ser.write( theinput )
  while True:
    try:
      time.sleep(0.01)
      state = ser.readline()
      print state
      return state
    except:
      pass
  time.sleep(0.1)

f = open('dataFile.txt','a')

while 1 :
    arduino_sensor = send_and_receive('1')
    f.write(arduino_sensor)
    f.close()
    f = open('dataFile.txt','a')

robust.ino

void setup() {
  Serial.begin(115200);
}

void loop() {
  Serial.println(analogRead(A0));
  delay(1000);
}

void setup () {   pinMode(13, OUTPUT);   Serial.begin(115200); } 
    void loop() {

  if (Serial.available())    {

     ch = Serial.read();

     if ( ch == '1' ) { 
       Serial.println(analogRead(A0)); // if '1' is received, then send back analog read A0
     } 
     else if (ch == '2') {    
       digitalWrite(13,HIGH); // if '2' is received, turn on the led attached to 13
     } 
     else if (ch == '3') {
       digitalWrite(13,LOW); // if '3' is received then turn off the led attached 13
     } else {
       delay(10);
     }
   }    
}

---

你应该发布你写的代码。