Python 尝试配置Apache 2.4服务器时出现永久性403禁止错误

我已经尝试配置这个服务器两天了，并在wsgi下运行了一些python代码，但由于权限错误，我甚至无法运行hello world示例。我觉得自己完全无能

我正在尝试运行hw.py，这只是为了了解如何从Web服务器运行脚本

我无法避免403错误

我已经看过了，还有其他一些类似的例子，我已经做了所有的例子

• 更改目录中文件的写入权限
• 更改目录的指令以允许获取文件，即：

  <Directory />
      Options FollowSymLinks
      AllowOverride None
      Require all granted
  </Directory>
  

  
  选项如下符号链接
  不允许超限
  要求所有授权
  

任何见解都会有所帮助。这是对Web服务器的一次非常残酷的介绍

--

#重要
#{$path}用于指定AMPPS安装路径
#
#这是Apache HTTP服务器的主要配置文件。它包含
#为服务器提供指令的配置指令。
#有关详细信息，请参阅。
#特别是，请参见
# 
#有关每个配置指令的讨论。
#
#不要在没有理解的情况下简单地阅读这里的说明
#他们做什么。它们在这里只是作为提示或提醒。如果你不确定
#查阅在线文档。你已经被警告了。
#
#配置和日志文件名：如果您为许多
#在服务器的控制文件中，以“/”开头（对于Win32，则为“驱动器：/”）
#服务器将使用该显式路径。如果文件名*不*开始
#在“/”前面加上ServerRoot的值——所以是“logs/foo.log”
#当ServerRoot设置为“{$path}/apache”时，将由
#服务器名为“{$path}/apache/logs/foo.log”。
#
#注意：如果指定了文件名，则必须使用正斜杠
#而不是反斜杠（例如，“c:/apache”而不是“c:\apache”）。
#如果省略驱动器号，则为httpd.exe所在的驱动器
#默认情况下将使用。建议您始终提供
#绝对路径中的显式驱动器号，以避免混淆。
#
#ServerRoot：目录树的顶部，服务器的
#保留配置、错误和日志文件。
#
#不要在目录路径的末尾添加斜杠。如果你指的是
#ServerRoot在非本地磁盘上，请确保指向LockFile指令
#在本地磁盘上。如果您希望为多个服务器共享同一个ServerRoot
#在httpd守护进程中，您至少需要更改LockFile和PidFile。
#
ServerRoot“{$path}/apache”
#
#侦听：允许您将Apache绑定到特定的IP地址和/或
#端口，而不是默认端口。另见
#指令。
#
#将此更改为侦听特定IP地址，如下所示
#防止Apache欺骗所有绑定的IP地址。
#
#听12.34.56.78:80
听80
#
#动态共享对象（DSO）支持
#
#为了能够使用作为DSO构建的模块的功能，您需要
#必须在此位置放置相应的“LoadModule”行，以便
#其中包含的指令在使用之前实际上是可用的。
#静态编译的模块（由“httpd-l”列出）不需要
#在这里装货。
#
#例如：
#LoadModule foo_modules/mod_foo.so
#
LoadModule actions\u module modules/mod\u actions.so
LoadModule alias\u modules/mod\u alias.so
加载模块asis\u模块模块/mod\u asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn\u dbm\u module modules/mod\u authn\u dbm.so
LoadModule authn\u file\u module modules/mod\u authn\u file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_modules/mod_autoindex.so
#LoadModule cache\u modules/mod\u cache.so
#LoadModule cern\u meta\u module modules/mod\u cern\u meta.so
LoadModule cgi_modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_modules/mod_dbd.so
#LoadModule deflate_模块/mod_deflate.so
LoadModule dir\u modules/mod\u dir.so
#LoadModule dumpio_modules/mod_dumpio.so
LoadModule env_modules/mod_env.so
#LoadModule expires\u modules/mod\u expires.so
#LoadModule ext\u filter\u module modules/mod\u ext\u filter.so
#LoadModule file\u cache\u module modules/mod\u file\u cache.so
#LoadModule filter\u modules/mod\u filter.so
#LoadModule headers\u modules/mod\u headers.so
#加载模块识别号模块/mod识别号so
#LoadModule imagemap\u module modules/mod\u imagemap.so
LoadModule include\u modules/mod\u include.so
#LoadModule info\u modules/mod\u info.so
LoadModule isapi_modules/mod_isapi.so
#LoadModule ldap_modules/mod_ldap.so
#LoadModule logio\u modules/mod\u logio.so
LoadModule log\u config\u module modules/mod\u log\u config.so
#LoadModule log\u法医学\u module modules/mod\u log\u法医学.so
LoadModule mime_modules/mod_mime.so
#LoadModule mime\u magic\u module modules/mod\u mime\u magic.so
LoadModule negotiation\u modules/mod\u negotiation.so
#LoadModule proxy\u modules/mod\u proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy\u balancer\u module modules/mod\u proxy\u balancer.so
#LoadModule proxy\u connect\u module modules/mod\u proxy\u connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy\u http\u module modules/mod\u proxy\u http.so
#加载模块代理\u scgi\u模块模块/mod\u代理_
# IMPORTANT
# {$path} is used to specify AMPPS installation path

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "{$path}/apache" will be interpreted by the
# server as "{$path}/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "{$path}/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule data_module modules/mod_data.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule lua_module modules/mod_lua.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

LoadModule {$php}_module "{$path}/php/{$php}apache2_4.dll"

PHPIniDir "{$path}/apache"
LoadFile "{$path}/php/libpq.dll"

SetEnv TMP "{$path}/tmp"

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User Tare
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName 127.0.0.1:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "{$path}/www"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Require all granted
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
# ======================================================
# !!! DO NOT CHANGE THIS LINE AND THE FOLLOWING ONES !!!
# ======================================================
<Directory "{$path}/www">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    #Options Indexes FollowSymLinks
    AddHandler cgi-script cgi pl py
    Options ExecCGI 
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
    AddHandler cgi-script .cgi .py
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.shtml index.wml index.pwml index.php index.php3 index.php4 index.php5 index.py default.py index.wsgi
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#Softaculous AMPPS Will take max 600 sec to process anything
TimeOut 600

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://127.0.0.1/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    Alias /images-ampps "{$path}/apache/icons/ampps"
    Alias /phpmyadmin "{$path}/phpMyAdmin"
    Alias /sqlite "{$path}/SQliteManager"
    Alias /ampps "{$path}/ampps/softaculous/enduser"
    Alias /ampps-admin "{$path}/ampps/softaculous"
    Alias /rockmongo "{$path}/RockMongo"

    <Directory "{$path}/apache/icons/ampps">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    <Directory "{$path}/ampps/softaculous/enduser">
        Options FollowSymLinks Indexes ExecCGI
    AddHandler cgi-script .php
        AllowOverride All
        Order deny,allow
        allow from All
    </Directory>

    <Directory "{$path}/phpmyadmin">
        Options FollowSymLinks Indexes
        AllowOverride All
        Order deny,allow
        allow from All
    </Directory>

    <Directory "{$path}/SQliteManager">
        Options FollowSymLinks Indexes
        AllowOverride All
        Order deny,allow
        allow from All
    </Directory>

    <Directory "{$path}/ampps/softaculous">
        Options FollowSymLinks Indexes ExecCGI
    AddHandler cgi-script .php
        AllowOverride All
        Order deny,allow
        allow from All
    </Directory>

    <Directory "{$path}/RockMongo">
        Options FollowSymLinks Indexes
        AllowOverride All
        Order deny,allow
        allow from All
    </Directory>

    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "{$path}/www/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    AddType application/x-tar .tgz
    AddType image/x-icon .ico
    AddType application/vnd.wap.wmlc .wmlc
    AddType application/x-httpd-php .phtml .pwml .php5 .php4 .php3 .php2 .php .inc
    AddType text/vnd.wap.wml .wml
    AddType text/vnd.wap.wmlscript .wmls
    AddType text/vnd.wap.wmlscriptc .wmlsc
    AddType image/vnd.wap.wbmp .wbmp

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl .py

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
ErrorDocument 500 /error/50x.html
ErrorDocument 404 /error/404.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

#### Localhost VirtualHost ####

<VirtualHost 127.0.0.1:80>
<Directory "{$path}/www">
    Options FollowSymLinks Indexes
    AllowOverride All
    Require all granted
</Directory>
ServerName localhost
ServerAlias localhost 127.0.0.1
ScriptAlias /cgi-bin/ "{$path}/www/cgi-bin/"
DocumentRoot "{$path}/www"
ErrorLog "{$path}/apache/logs/error.log"
CustomLog "{$path}/apache/logs/access.log" combined

#<Directory "{$path}/www/tests">
#   AllowOverride All
#   Require all granted
#   #Allow from all
#</Directory>
</VirtualHost>

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

<IfModule ssl_module>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
</IfModule>

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

#
# Python
#Include "{$path}/python/python.conf"
#
#Alias
Include conf/extra/alias.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>