//////////// //全局变量 int客户； int main_pool_busy； int*poolsockets，非poolsockets； int-worknum； 结构环mqueue； ///////////////////////////
//////////// //全局变量 int客户； int main_pool_busy； int*poolsockets，非poolsockets； int-worknum； 结构环mqueue； /////////////////////////////////////// int main（int argc，字符**argv）{ //如果没有足够的参数进行编程，则进行错误处理 如果（argc！=3）{ printf（“服务器的参数不足：./server portnum NumThreadsinPool\n”）； _出口（-1）； } //将参数从字符串转换为整数值 int port=atoi（argv[1]）； worknum=atoi（argv[2]）； //启动服务器部分 服务器（端口）； } /////////////////////////////////////////////////////////////////////////////////////////////// //侦听服务器线程///////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////// 无效服务器（int端口）{ 国际标准差、新标准差； 名为struct sockaddr_，cli_name； int sock_opt_val=1； 国际气候； pthread_t threads[worknum]；//创建pthread id数组 pthread_t dis[1]；//创建我们的调度程序数组（创建线程所必需的） init_mutex_stuff（线程，dis）；//初始化mutex和stuff //服务器设置//////////////////////// if（（sd=socket（AF\u INET，SOCK\u STREAM，0））<0）{ perror（（（servConn）：套接字（）错误）； _出口（-1）； } if（setsockopt（sd，SOL_SOCKET，SO_REUSEADDR，（char*）和sock_opt_val， sizeof（sock_opt_val））<0）{ perror（“（servConn）：无法在INET套接字上设置SO_REUSEADDR”）； _出口（-1）； } name.sin_family=AF_INET； name.sin_port=htons（port）； name.sin_addr.s_addr=htonl（INADDR_ANY）； if（bind（sd，（struct sockaddr*）&name，sizeof（name））<0）{ perror（（（servConn）：bind（）错误）； _出口（-1）； } 听（sd，5）； //服务器安装结束////////////////////////////////////////////////// 对于（；；）{ cli_len=sizeof（cli_name）； new\u sd=accept（sd，（struct sockaddr*）&cli\u name和cli\u len）； printf（“分配新的套接字描述符：%d\n”，new\u sd）； inc_clients（）；//新客户端已加入，增量客户端 将_添加到_套接字_池（新建）；//将客户端添加到套接字池 如果（新标准差<0）{ perror（（（servConn）：accept（）错误）； _出口（-1）； } } pthread_exit（NULL）；//退出 } //将新套接字添加到池中为pthreads指定的数组中 void add_to_socket_pool（int socket）{ pthread_mutex_lock（&m_pool_busy）；//锁定以便我们可以检查main_pool_busy int i； //如果不是所有的主池都忙，那么分配给其中一个 如果（主池忙//////////// //全局变量 int客户； int main_pool_busy； int*poolsockets，非poolsockets； int-worknum； 结构环mqueue； ///////////////////////////,c,sockets,C,Sockets,//////////// //全局变量 int客户； int main_pool_busy； int*poolsockets，非poolsockets； int-worknum； 结构环mqueue； /////////////////////////////////////// int main（int argc，字符**argv）{ //如果没有足够的参数进行编程，则进行错误处理 如果（argc！=3）{ printf（“服务器的参数不足：./server portnum NumThread
while(mqueue.head != mqueue.tail && count < dis_m){
printf("Sending to client %s: %s\n", pointer->id, pointer->message);
int fd;
fd = open(pointer->message, O_RDONLY);
char buf[58368];
int bytesRead;
printf("This is fd %d\n", fd);
bytesRead=read(fd,buf,58368);
send(pointer->socket,buf,bytesRead,0);
perror("Error:\n");
fflush(stdout);
close(fd);
mqueue.mcount--;
mqueue.head = mqueue.head->next;
free(pointer->message);
free(pointer);
pointer = mqueue.head;
count++;
}
printf("Sending %s\n", pointer->message);
int fd;
fd = open(pointer->message, O_RDONLY);
printf("This is fd %d\n", fd);
printf("I am hhere2\n");
char buf[58368];
int bytesRead;
bytesRead=read(fd,buf,58368);
send(pointer->socket,buf,bytesRead,0);
perror("Error:\n");
close(fd);
mqueue.mcount--;
if(mqueue.head != mqueue.tail){
mqueue.head = mqueue.head->next;
}
else{
mqueue.head->next = malloc(sizeof(struct message));
mqueue.head = mqueue.head->next;
mqueue.head->next = malloc(sizeof(struct message));
mqueue.tail = mqueue.head->next;
mqueue.head->message = NULL;
}
free(pointer->message);
free(pointer);
pthread_mutex_unlock(&numm);
pthread_mutex_unlock(&circ);
pthread_mutex_unlock(&slots);
Sending to client a: ./support/images/sw90.ppm
This is fd 4
Error:
: Socket operation on non-socket
Sending to client a: ./support/images/sw91.ppm
This is fd 4
Error:
: Socket operation on non-socket
Sending ./support/images/sw92.ppm
This is fd 4
I am hhere2
Error:
: Socket operation on non-socket
My dispatcher has defeated evil
This is fd 6
Error:
: Bad file descriptor
Sending to client a: ./support/images/sw85.ppm
This is fd 6
Error:
#include <netinet/in.h>
#include <netinet/in.h>
#include <netdb.h>
#include <arpa/inet.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <pthread.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include "ring.h"
/*
Version 1
Here is what is implemented so far:
The threads are created from the arguments specified (number of threads that is)
The server will lock and update variables based on how many clients are in the system and such.
The socket that is opened when a new client connects, must be passed to the threads. To do this, we need some sort of global array. I did
this by specifying an int client and main_pool_busy, and two pointers poolsockets and nonpoolsockets.
My thinking on this was that when a new client enters the system, the server thread increments the variable client. When a thread is finished with this client (after it sends it the data), the thread will decrement client and close the socket. HTTP servers act this way sometimes (they terminate the socket as soon as one transmission is sent). *Note down at bottom
After the server portion increments the client counter, we must open up a new socket (denoted by new_sd) and get this value to the appropriate thread.
To do this, I created global array poolsockets, which will hold all the socket descriptors for our pooled threads. The server portion gets the new socket descriptor, and places the value in the first spot of the array that has a 0. We only place a value in this array IF:
1. The variable main_pool_busy < worknum (If we have more clients in the system than in our pool, it doesn't mean we should always create a new thread.
At the end of this, the server signals on the condition variable clientin that a new client has arrived.
In our pooled thread, we then must walk this array and check the array until we hit our first non-zero value. This is the socket we will give to that thread. The thread then changes the array to have a zero here.
What if our all threads in our pool our busy?
If this is the case, then we will know it because our threads in this pool will increment main_pool_busy by one when they are working on a request and decrement it when they are done. If main_pool_busy >= worknum, then we must dynamically create a new thread. Then, we must realloc the size of our
nonpoolsockets array by 1 int. We then add the new socket descriptor to our pool.
Here's what we need to figure out:
NOTE* Each worker should generate 100 messages which specify the worker thread ID, client socket descriptor and a copy of the client message. Additionally, each message should include a message number, starting from 0 and incrementing for each subsequent message sent to the same client.
I don't know how to keep track of how many messages were to the same client. Maybe we shouldn't close the socket descriptor, but rather keep an array of structs for each socket that includes how many messages they have been sent. Then, the server adds the struct, the threads remove it, then the threads add it back once they've serviced one request (unless the count is 100).
-------------------------------------------------------------
CHANGES
Version 1
----------
NONE: this is the first version.
*/
#define MAXSLOTS 30
#define dis_m 15 //problems with dis_m ==1
//Function prototypes
void inc_clients();
void init_mutex_stuff(pthread_t*, pthread_t*);
void *threadpool(void *);
void server(int);
void add_to_socket_pool(int);
void inc_busy();
void dec_busy();
void *dispatcher();
void create_message(long, int, int, char *, char *);
void init_ring();
void add_to_ring(char *, char *, int, int, int);
int socket_from_string(char *);
void add_to_head(char *);
void add_to_tail(char *);
struct message * reorder(struct message *, struct message *, int);
int get_threadid(char *);
void delete_socket_messages(int);
struct message * merge(struct message *, struct message *, int);
int get_request(char *, char *, char*);
/////////////////////
//Global mutexes and condition variables
pthread_mutex_t startservice;
pthread_mutex_t numclients;
pthread_mutex_t pool_sockets;
pthread_mutex_t nonpool_sockets;
pthread_mutex_t m_pool_busy;
pthread_mutex_t slots;
pthread_mutex_t numm;
pthread_mutex_t circ;
pthread_cond_t clientin;
pthread_cond_t m;
///////////////////////////////////////
//Global variables
int clients;
int main_pool_busy;
int * poolsockets, nonpoolsockets;
int worknum;
struct ring mqueue;
///////////////////////////////////////
int main(int argc, char ** argv){
//error handling if not enough arguments to program
if(argc != 3){
printf("Not enough arguments to server: ./server portnum NumThreadsinPool\n");
_exit(-1);
}
//Convert arguments from strings to integer values
int port = atoi(argv[1]);
worknum = atoi(argv[2]);
//Start server portion
server(port);
}
///////////////////////////////////////////////////////////////////////////////////////////////
//The listen server thread/////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////
void server(int port){
int sd, new_sd;
struct sockaddr_in name, cli_name;
int sock_opt_val = 1;
int cli_len;
pthread_t threads[worknum]; //create our pthread id array
pthread_t dis[1]; //create our dispatcher array (necessary to create thread)
init_mutex_stuff(threads, dis); //initialize mutexes and stuff
//Server setup ///////////////////////////////////////////////////////
if ((sd = socket (AF_INET, SOCK_STREAM, 0)) < 0) {
perror("(servConn): socket() error");
_exit (-1);
}
if (setsockopt (sd, SOL_SOCKET, SO_REUSEADDR, (char *) &sock_opt_val,
sizeof(sock_opt_val)) < 0) {
perror ("(servConn): Failed to set SO_REUSEADDR on INET socket");
_exit (-1);
}
name.sin_family = AF_INET;
name.sin_port = htons (port);
name.sin_addr.s_addr = htonl(INADDR_ANY);
if (bind (sd, (struct sockaddr *)&name, sizeof(name)) < 0) {
perror ("(servConn): bind() error");
_exit (-1);
}
listen (sd, 5);
//End of server Setup //////////////////////////////////////////////////
for (;;) {
cli_len = sizeof (cli_name);
new_sd = accept (sd, (struct sockaddr *) &cli_name, &cli_len);
printf ("Assigning new socket descriptor: %d\n", new_sd);
inc_clients(); //New client has come in, increment clients
add_to_socket_pool(new_sd); //Add client to the pool of sockets
if (new_sd < 0) {
perror ("(servConn): accept() error");
_exit (-1);
}
}
pthread_exit(NULL); //Quit
}
//Adds the new socket to the array designated for pthreads in the pool
void add_to_socket_pool(int socket){
pthread_mutex_lock(&m_pool_busy); //Lock so that we can check main_pool_busy
int i;
//If not all our main pool is busy, then allocate to one of them
if(main_pool_busy < worknum){
pthread_mutex_unlock(&m_pool_busy); //unlock busy, we no longer need to hold it
pthread_mutex_lock(&pool_sockets); //Lock the socket pool array so that we can edit it without worry
for(i = 0; i < worknum; i++){ //Find a poolsocket that is -1; then we should put the real socket there. This value will be changed back to -1 when the thread grabs the sockfd
if(poolsockets[i] == -1){
poolsockets[i] = socket;
pthread_mutex_unlock(&pool_sockets); //unlock our pool array, we don't need it anymore
inc_busy(); //Incrememnt busy (locks the mutex itself)
pthread_cond_signal(&clientin); //Signal first thread waiting on a client that a client needs to be serviced
break;
}
}
}
else{ //Dynamic thread creation goes here
pthread_mutex_unlock(&m_pool_busy);
}
}
//Increments the client number. If client number goes over worknum, we must dynamically create new pthreads
void inc_clients(){
pthread_mutex_lock(&numclients);
clients++;
pthread_mutex_unlock(&numclients);
}
//Increments busy
void inc_busy(){
pthread_mutex_lock(&m_pool_busy);
main_pool_busy++;
pthread_mutex_unlock(&m_pool_busy);
}
//Initialize all of our mutexes at the beginning and create our pthreads
void init_mutex_stuff(pthread_t * threads, pthread_t * dis){
pthread_mutex_init(&startservice, NULL);
pthread_mutex_init(&numclients, NULL);
pthread_mutex_init(&pool_sockets, NULL);
pthread_mutex_init(&nonpool_sockets, NULL);
pthread_mutex_init(&m_pool_busy, NULL);
pthread_mutex_init(&circ, NULL);
pthread_cond_init (&clientin, NULL);
main_pool_busy = 0;
poolsockets = malloc(sizeof(int)*worknum);
int threadreturn; //error checking variables
long i = 0; //Loop and create pthreads
for(i; i < worknum; i++){
threadreturn = pthread_create(&threads[i], NULL, threadpool, (void *) i);
poolsockets[i] = -1;
if(threadreturn){
perror("Thread pool created unsuccessfully");
_exit(-1);
}
}
pthread_create(&dis[0], NULL, dispatcher, NULL);
}
//////////////////////////////////////////////////////////////////////////////////////////
/////////Main pool routines
/////////////////////////////////////////////////////////////////////////////////////////
void dec_busy(){
pthread_mutex_lock(&m_pool_busy);
main_pool_busy--;
pthread_mutex_unlock(&m_pool_busy);
}
void dec_clients(){
pthread_mutex_lock(&numclients);
clients--;
pthread_mutex_unlock(&numclients);
}
//This is what our threadpool pthreads will be running.
void *threadpool(void * threadid){
long id = (long) threadid; //Id of this thread
int i;
int socket;
int counter = 0;
//Try and gain access to the next client that comes in and wait until server signals that a client as arrived
while(1){
pthread_mutex_lock(&startservice); //lock start service (required for cond wait)
pthread_cond_wait(&clientin, &startservice); //wait for signal from server that client exists
pthread_mutex_unlock(&startservice); //unlock mutex.
pthread_mutex_lock(&pool_sockets); //Lock the pool socket so we can get the socket fd unhindered/interrupted
for(i = 0; i < worknum; i++){
if(poolsockets[i] != -1){
socket = poolsockets[i];
poolsockets[i] = -1;
pthread_mutex_unlock(&pool_sockets);
}
}
printf("Thread #%d is past getting the socket\n", id);
int incoming = 1;
while(counter < 100 && incoming != 0){
char buffer[512];
bzero(buffer,512);
int startcounter = 0;
incoming = read(socket, buffer, 512);
if(buffer[0] != 0){
//client ID:priority:request:arguments
char id[100];
long prior;
char request[100];
char arg1[100];
char message[100];
char arg2[100];
char * point;
point = strtok(buffer, ":");
strcpy(id, point);
point = strtok(NULL, ":");
prior = atoi(point);
point = strtok(NULL, ":");
strcpy(request, point);
point = strtok(NULL, ":");
strcpy(arg1, point);
point = strtok(NULL, ":");
if(point != NULL){
strcpy(arg2, point);
}
int fd;
if(strcmp(request, "start_movie") == 0){
int count = 1;
while(count <= 100){
char temp[10];
snprintf(temp, 50, "%d\0", count);
strcpy(message, "./support/images/");
strcat(message, arg1);
strcat(message, temp);
strcat(message, ".ppm");
printf("This is message %s to %s\n", message, id);
count++;
add_to_ring(message, id, prior, counter, socket); //Adds our created message to the ring
counter++;
}
printf("I'm out of the loop\n");
}
else if(strcmp(request, "seek_movie") == 0){
int count = atoi(arg2);
while(count <= 100){
char temp[10];
snprintf(temp, 10, "%d\0", count);
strcpy(message, "./support/images/");
strcat(message, arg1);
strcat(message, temp);
strcat(message, ".ppm");
printf("This is message %s\n", message);
count++;
}
}
//create_message(id, socket, counter, buffer, message); //Creates our message from the input from the client. Stores it in buffer
}
else{
delete_socket_messages(socket);
break;
}
}
counter = 0;
close(socket);//Zero out counter again
}
dec_clients(); //client serviced, decrement clients
dec_busy(); //thread finished, decrement busy
}
//Creates a message
void create_message(long threadid, int socket, int counter, char * buffer, char * message){
snprintf(message, strlen(buffer)+15, "%d:%d:%d:%s", threadid, socket, counter, buffer);
}
//Gets the socket from the message string (maybe I should just pass in the socket to another method)
int socket_from_string(char * message){
char * substr1 = strstr(message, ":");
char * substr2 = substr1;
substr2++;
int occurance = strcspn(substr2, ":");
char sock[10];
strncpy(sock, substr2, occurance);
return atoi(sock);
}
//Adds message to our ring buffer's head
void add_to_head(char * message){
printf("Adding to head of ring\n");
mqueue.head->message = malloc(strlen(message)+1); //Allocate space for message
strcpy(mqueue.head->message, message); //copy bytes into allocated space
}
//Adds our message to our ring buffer's tail
void add_to_tail(char * message){
printf("Adding to tail of ring\n");
mqueue.tail->message = malloc(strlen(message)+1); //allocate space for message
strcpy(mqueue.tail->message, message); //copy bytes into allocated space
mqueue.tail->next = malloc(sizeof(struct message)); //allocate space for the next message struct
}
//Adds a message to our ring
void add_to_ring(char * message, char * id, int prior, int mnum, int socket){
//printf("This is message %s:" , message);
pthread_mutex_lock(&circ); //Lock the ring buffer
pthread_mutex_lock(&numm); //Lock the message count (will need this to make sure we can't fill the buffer over the max slots)
if(mqueue.head->message == NULL){
add_to_head(message); //Adds it to head
mqueue.head->socket = socket; //Set message socket
mqueue.head->priority = prior; //Set its priority (thread id)
mqueue.head->mnum = mnum; //Set its message number (used for sorting)
mqueue.head->id = malloc(sizeof(id));
strcpy(mqueue.head->id, id);
}
else if(mqueue.tail->message == NULL){ //This is the problem for dis_m 1 I'm pretty sure
add_to_tail(message);
mqueue.tail->socket = socket;
mqueue.tail->priority = prior;
mqueue.tail->mnum = mnum;
mqueue.tail->id = malloc(sizeof(id));
strcpy(mqueue.tail->id, id);
}
else{
mqueue.tail->next = malloc(sizeof(struct message));
mqueue.tail = mqueue.tail->next;
add_to_tail(message);
mqueue.tail->socket = socket;
mqueue.tail->priority = prior;
mqueue.tail->mnum = mnum;
mqueue.tail->id = malloc(sizeof(id));
strcpy(mqueue.tail->id, id);
}
mqueue.mcount++;
pthread_mutex_unlock(&circ);
if(mqueue.mcount >= dis_m){
pthread_mutex_unlock(&numm);
pthread_cond_signal(&m);
}
else{
pthread_mutex_unlock(&numm);
}
printf("out of add to ring\n");
fflush(stdout);
}
//////////////////////////////////
//Dispatcher routines
/////////////////////////////////
void *dispatcher(){
init_ring();
while(1){
pthread_mutex_lock(&slots);
pthread_cond_wait(&m, &slots);
pthread_mutex_lock(&numm);
pthread_mutex_lock(&circ);
printf("Dispatcher to the rescue!\n");
mqueue.head = reorder(mqueue.head, mqueue.tail, mqueue.mcount);
//printf("This is the head %s\n", mqueue.head->message);
//printf("This is the tail %s\n", mqueue.head->message);
fflush(stdout);
struct message * pointer = mqueue.head;
int count = 0;
while(mqueue.head != mqueue.tail && count < dis_m){
printf("Sending to client %s: %s\n", pointer->id, pointer->message);
int fd;
fd = open(pointer->message, O_RDONLY);
char buf[58368];
int bytesRead;
printf("This is fd %d\n", fd);
bytesRead=read(fd,buf,58368);
send(pointer->socket,buf,bytesRead,0);
perror("Error:\n");
fflush(stdout);
close(fd);
mqueue.mcount--;
mqueue.head = mqueue.head->next;
free(pointer->message);
free(pointer);
pointer = mqueue.head;
count++;
}
printf("Sending %s\n", pointer->message);
int fd;
fd = open(pointer->message, O_RDONLY);
printf("This is fd %d\n", fd);
printf("I am hhere2\n");
char buf[58368];
int bytesRead;
bytesRead=read(fd,buf,58368);
send(pointer->socket,buf,bytesRead,0);
perror("Error:\n");
close(fd);
mqueue.mcount--;
if(mqueue.head != mqueue.tail){
mqueue.head = mqueue.head->next;
}
else{
mqueue.head->next = malloc(sizeof(struct message));
mqueue.head = mqueue.head->next;
mqueue.head->next = malloc(sizeof(struct message));
mqueue.tail = mqueue.head->next;
mqueue.head->message = NULL;
}
free(pointer->message);
free(pointer);
pthread_mutex_unlock(&numm);
pthread_mutex_unlock(&circ);
pthread_mutex_unlock(&slots);
printf("My dispatcher has defeated evil\n");
}
}
void init_ring(){
mqueue.head = malloc(sizeof(struct message));
mqueue.head->next = malloc(sizeof(struct message));
mqueue.tail = mqueue.head->next;
mqueue.mcount = 0;
}
struct message * reorder(struct message * begin, struct message * end, int num){
//printf("I am reordering for size %d\n", num);
fflush(stdout);
int i;
if(num == 1){
//printf("Begin: %s\n", begin->message);
begin->next = NULL;
return begin;
}
else{
struct message * left = begin;
struct message * right;
int middle = num/2;
for(i = 1; i < middle; i++){
left = left->next;
}
right = left -> next;
left -> next = NULL;
//printf("Begin: %s\nLeft: %s\nright: %s\nend:%s\n", begin->message, left->message, right->message, end->message);
left = reorder(begin, left, middle);
if(num%2 != 0){
right = reorder(right, end, middle+1);
}
else{
right = reorder(right, end, middle);
}
return merge(left, right, num);
}
}
struct message * merge(struct message * left, struct message * right, int num){
//printf("I am merginging! left: %s %d, right: %s %dnum: %d\n", left->message,left->priority, right->message, right->priority, num);
struct message * start, * point;
int lenL= 0;
int lenR = 0;
int flagL = 0;
int flagR = 0;
int count = 0;
int middle1 = num/2;
int middle2;
if(num%2 != 0){
middle2 = middle1+1;
}
else{
middle2 = middle1;
}
while(lenL < middle1 && lenR < middle2){
count++;
//printf("In here for count %d\n", count);
if(lenL == 0 && lenR == 0){
if(left->priority < right->priority){
start = left; //Set the start point
point = left; //set our enum;
left = left->next; //move the left pointer
point->next = NULL; //Set the next node to NULL
lenL++;
}
else if(left->priority > right->priority){
start = right;
point = right;
right = right->next;
point->next = NULL;
lenR++;
}
else{
if(left->mnum < right->mnum){
////printf("This is where we are\n");
start = left; //Set the start point
point = left; //set our enum;
left = left->next; //move the left pointer
point->next = NULL; //Set the next node to NULL
lenL++;
}
else{
start = right;
point = right;
right = right->next;
point->next = NULL;
lenR++;
}
}
}
else{
if(left->priority < right->priority){
point->next = left;
left = left->next; //move the left pointer
point = point->next;
point->next = NULL; //Set the next node to NULL
lenL++;
}
else if(left->priority > right->priority){
point->next = right;
right = right->next;
point = point->next;
point->next = NULL;
lenR++;
}
else{
if(left->mnum < right->mnum){
point->next = left; //set our enum;
left = left->next;
point = point->next;//move the left pointer
point->next = NULL; //Set the next node to NULL
lenL++;
}
else{
point->next = right;
right = right->next;
point = point->next;
point->next = NULL;
lenR++;
}
}
}
if(lenL == middle1){
flagL = 1;
break;
}
if(lenR == middle2){
flagR = 1;
break;
}
}
if(flagL == 1){
point->next = right;
point = point->next;
for(lenR; lenR< middle2-1; lenR++){
point = point->next;
}
point->next = NULL;
mqueue.tail = point;
}
else{
point->next = left;
point = point->next;
for(lenL; lenL< middle1-1; lenL++){
point = point->next;
}
point->next = NULL;
mqueue.tail = point;
}
//printf("This is the start %s\n", start->message);
//printf("This is mqueue.tail %s\n", mqueue.tail->message);
return start;
}
void delete_socket_messages(int a){
}
int fd;
fd = open(pointer->message, O_RDONLY);
char buf[58368];
int bytesRead;
printf("This is fd %d\n", fd);
bytesRead=read(fd,buf,58368);
send(pointer->socket,buf,bytesRead,0);
perror("Error:\n");
//Function prototypes
void inc_clients();
//Function prototypes
void inc_clients(void);