如何检查ioctl上的现有参数
我想尝试如何使用可加载内核模块的I/o控件,这里是一个字符设备。 问题是:如何检查userspace端的如何检查ioctl上的现有参数,c,linux-kernel,kernel,ioctl,C,Linux Kernel,Kernel,Ioctl,我想尝试如何使用可加载内核模块的I/o控件,这里是一个字符设备。 问题是:如何检查userspace端的ioctl调用是否有参数。我发现在ioctl上,参数是可选的 在用户空间函数中: // set a parameter - this is a proper call if( ioctl(fd, IOCTL_SET_PARAM1, 5)<0 ) { fprintf(stderr,"Error while ioctl: %s\n", strerror(errno)); } // ca
ioctl
调用是否有参数。我发现在ioctl
上,参数是可选的
在用户空间函数中:
// set a parameter - this is a proper call
if( ioctl(fd, IOCTL_SET_PARAM1, 5)<0 )
{
fprintf(stderr,"Error while ioctl: %s\n", strerror(errno));
}
// call a setter without argument - this should cause an error
if( ioctl(fd, IOCTL_SET_PARAM1)<0 )
{
fprintf(stderr,"Error while ioctl: %s\n", strerror(errno));
}
问候,,
AlexJonathan Leffler说得很对,他说用户应该知道做什么和不做什么 顺便说一下。我找到了一个解决方案,用一个数组替换参数,数组中有count和最初的参数。在用户空间方面,用户没有任何更改。在内核空间方面,有两个宏用于获取原始参数和参数数量 下面是代码: expdev.h 现在,在用户空间函数中进行调用(与往常一样): 这将导致kern.log上的以下输出: 在用户空间方面:
Error while ioctl: Invalid argument
注意:
宏重新定义了ioctl。这意味着在同一源中的不同设备上使用
ioctl
将在不支持此宏的设备上导致错误(例如,如果使用标准tty)。用户查找并阅读他们要查找的设备的手册ioctl()
。如果用户找不到手册,则用户会找到源代码。如果用户找不到手册或源代码,有任何感觉的用户在找到关于他们计划使用的ioctl()。在C调用约定中,没有任何东西可以让被调用的代码轻松地确定调用了多少个参数。你必须假设用户做对了。你唯一能做的就是验证arg
是一个有效的数字。例如,如果arg
假定为0
或1
,则任何其他值都表示用户不知道他们在做什么。但是,用户可能会幸运(或不幸运,取决于您的观点),并且即使用户没有传递值,arg
也可能是有效值。
#ifndef EXPDEV_H_INCLUDED
#define EXPDEV_H_INCLUDED
#ifndef __KERNEL__
#include <stdint.h>
#endif // __KERNEL__
#include "pp_narg.h"
enum {
IOCTL_SET_PARAM1,
};
/* ioctl - wrapper *************************************************** */
#ifndef __KERNEL__
long int argW[2]={0};
long int PP_IOCTL_WRAPARG( long int narg, long int arg )
{
argW[0] = narg;
argW[1] = arg;
return (long int)(argW);
}
#define PP_IOCTL_NARG(n,fd,cmd,arg,...) \
( (n==3) ? \
( ioctl(fd,cmd,(long int)(PP_IOCTL_WRAPARG(1,(long int)arg))) ) : \
( ioctl(fd,cmd,(long int)(PP_IOCTL_WRAPARG(0,(long int)arg))) ) )
#define ioctl(...) \
(PP_IOCTL_NARG(PP_NARG(__VA_ARGS__), \
__VA_ARGS__, (long int)(0),(long int)(0)))
#else // __KERNEL__
#define IOCTL_ARGC(argW) (((long int*)argW)[0])
#define IOCTL_ARG(argW) (((long int*)argW)[1])
#endif // __KERNEL__
#endif // EXPDEV_H_INCLUDED
/*
Source: https://groups.google.com/forum/#!topic/comp.std.c/d-6Mj5Lko_s
*/
#ifndef PP_NARG_INCLUDED
#define PP_NARG_INCLUDED
#define PP_NARG(...) \
PP_NARG_(__VA_ARGS__,PP_RSEQ_N())
#define PP_NARG_(...) \
PP_ARG_N(__VA_ARGS__)
#define PP_ARG_N( \
_1, _2, _3, _4, _5, _6, _7, _8, _9,_10, \
_11,_12,_13,_14,_15,_16,_17,_18,_19,_20, \
_21,_22,_23,_24,_25,_26,_27,_28,_29,_30, \
_31,_32,_33,_34,_35,_36,_37,_38,_39,_40, \
_41,_42,_43,_44,_45,_46,_47,_48,_49,_50, \
_51,_52,_53,_54,_55,_56,_57,_58,_59,_60, \
_61,_62,_63,N,...) N
#define PP_RSEQ_N() \
63,62,61,60, \
59,58,57,56,55,54,53,52,51,50, \
49,48,47,46,45,44,43,42,41,40, \
39,38,37,36,35,34,33,32,31,30, \
29,28,27,26,25,24,23,22,21,20, \
19,18,17,16,15,14,13,12,11,10, \
9,8,7,6,5,4,3,2,1,0
#endif // PP_NARG_INCLUDED
#include "expdev.h"
// set a parameter
if( ioctl(fd, IOCTL_SET_PARAM1, 5)<0 )
{
fprintf(stderr,"Error while ioctl: %s\n", strerror(errno));
}
// call a setter without argument - this should cause an error
if( ioctl(fd, IOCTL_SET_PARAM1)<0 )
{
fprintf(stderr,"Error while ioctl: %s\n", strerror(errno));
}
#include "expdev.h"
long
fops_unlocked_ioctl (struct file *p_file,
unsigned int cmd,
unsigned long arg)
{
switch(cmd)
{
case IOCTL_SET_PARAM1:
printk(KERN_INFO "IOCTL called with IOCTL_SET_PARAM1\n");
if( IOCTL_ARGC(arg)!=1 )
{
printk(KERN_ERR "Missing argument.\n");
return -EINVAL;
}
param1 = (unsigned short) IOCTL_ARG(arg);
printk(KERN_INFO "param1 set to %d\n",param1);
break;
default:
printk(KERN_WARNING "IOCTL called with wrong request code.\n");
return -EINVAL;
}
return 0;
}
kernel: [18577.042438] IOCTL called with IOCTL_SET_PARAM1
kernel: [18577.042439] param1 set to 5
kernel: [18577.042442] IOCTL called with IOCTL_SET_PARAM1
kernel: [18577.042443] Missing argument.
Error while ioctl: Invalid argument