NVidia Quadro FX 3800的CUDA安装 我在安装英伟达QueDro FX 3800工作站上遇到CUDA 7（与TensorFlow一起使用）遇到了麻烦。我想知道这是否是因为GPU不再受支持

驱动器（340.96）的安装似乎工作正常：

$ sh ./NVIDIA-Linux-x86_64-340.96.run

Installation of the NVIDIA Accelerated Graphics Driver for Linux-x86_64
(version: 340.96) is now complete. Please update your XF86Config or
xorg.conf file as appropriate; see the file
/usr/share/doc/NVIDIA_GLX-1.0/README.txt for details.

但是，我认为我可能在以下方面遇到了问题：

$ ./cuda_7.0.28_linux.run --kernel-source-path=/usr/src/linux-headers-3.13.0-76-generic
The driver installation is unable to locate the kernel source. Please make sure
that the kernel source packages are installed and set up correctly. If you know
that the kernel source packages are installed and set up correctly, you may pass
the location of the kernel source with the '--kernel-source-path' flag.
...
Logfile is /tmp/cuda_install_1357.log

$ vi /tmp/cuda_install_1357.log
WARNING: The NVIDIA Quadro FX 3800 GPU installed in this system is
         supported through the NVIDIA 340.xx legacy Linux graphics drivers.
         Please visit http://www.nvidia.com/object/unix.html for more
         information.  The 346.46 NVIDIA Linux graphics driver will ignore
         this GPU.
WARNING: You do not appear to have an NVIDIA GPU supported by the 346.46
         NVIDIA Linux graphics driver installed in this system.  For
         further details, please see the appendix SUPPORTED NVIDIA GRAPHICS
         CHIPS in the README available on the Linux driver download page at
         www.nvidia.com.
...
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
       frequently when this kernel module was built against the wrong or
       improperly configured kernel sources, with a version of gcc that
       differs from the one used to build the target kernel, or if a driver
       such as rivafb, nvidiafb, or nouveau is present and prevents the
       NVIDIA kernel module from obtaining ownership of the NVIDIA graphics
       device(s), or no NVIDIA GPU installed in this system is supported by
       this NVIDIA Linux graphics driver release.
...
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for
more information.

安装失败是否是因为CUDA放弃了对此图形卡的支持

---

我遵循链接线索：>>我认为Quadro FX 3800支持CUDA（至少在一开始是这样）。

是的，CUDA 7.0及更高版本不再支持Quadro FX 3800 GPU

支持该GPU的上一个CUDA版本是CUDA 6.5

可能会引起兴趣。您的QFX 3800是一款智能手机

---

如果您查看CUDA 7随附的发行说明，您会发现一个关于取消对这些早期GPU支持的通知。同样，较新的CUDA驱动程序版本也不支持这些GPU。

是的，CUDA 7.0及更高版本不再支持Quadro FX 3800 GPU

支持该GPU的上一个CUDA版本是CUDA 6.5

可能会引起兴趣。您的QFX 3800是一款智能手机

如果您查看CUDA 7随附的发行说明，您会发现一个关于取消对这些早期GPU支持的通知。同样，较新的CUDA驱动程序版本也不支持这些GPU