如何获得Flash电影'；在c++；建设者 我在C++ Builder 2010 IDE中使用StaskWaveFlash ActiveX，我的程序显示了广告（SWF文件），这些文件将被.ini文件加载，我将路径添加到每个电影中。当广告数量增加时，我决定在C++ Builder中编写一个方法来播放每个SWF电影。 由于不同的swf电影具有不同的帧数、持续时间和速度（FPS），我将创建一种方法，跟踪所有swf信息，并通过TTimer控制播放swf文件
正如我所说，我有我的.ini文件如何获得Flash电影'；在c++；建设者 我在C++ Builder 2010 IDE中使用StaskWaveFlash ActiveX，我的程序显示了广告（SWF文件），这些文件将被.ini文件加载，我将路径添加到每个电影中。当广告数量增加时，我决定在C++ Builder中编写一个方法来播放每个SWF电影。 由于不同的swf电影具有不同的帧数、持续时间和速度（FPS），我将创建一种方法，跟踪所有swf信息，并通过TTimer控制播放swf文件,flash,actionscript,c++builder,Flash,Actionscript,C++builder,正如我所说，我有我的.ini文件 ads1=C:\1.swf ads2=c:\2.swf ads3=c:\3.swf 等等 我的函数如下代码所示 void __fastcall TForm1::PlaySwfFile(TShockwaveFlash *fObj, AnsiString movPath) { int totFrames,framesPerSec; fObj->Movie=movPath; totFrames=fObj->TotalFrames;
ads1=C:\1.swf
ads2=c:\2.swf
ads3=c:\3.swf
void __fastcall TForm1::PlaySwfFile(TShockwaveFlash *fObj, AnsiString movPath)
{
int totFrames,framesPerSec;
fObj->Movie=movPath;
totFrames=fObj->TotalFrames;
// framesPerSec=fObj->
delete fObj;
}
如何确定电影将播放多长时间（以秒为单位）以设置计时器间隔？？？您可以从SWF标题中获取每秒帧数和总帧数。见本报告第2章。如果您的SWF不是由脚本控制的，则应该提供准确的信息。以下代码使用php解析SWF头
<?PHP
//-----------------------------------------------------------------------------
// SWF HEADER - version 1.0
// Small utility class to determine basic data from a SWF file header
// Does not need any php-flash extension, based on raw binary data reading
//-----------------------------------------------------------------------------
// SWFHEADER CLASS - PHP SWF header parser
// Copyright (C) 2004 Carlos Falo Hervбs
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//-----------------------------------------------------------------------------
class swfheader {
var $debug ; // Output DEBUG info
var $fname ; // SWF file analyzed
var $magic ; // Magic in a SWF file (FWS or CWS)
var $compressed ; // Flag to indicate a compressed file (CWS)
var $version ; // Flash version
var $size ; // Uncompressed file size (in bytes)
var $width ; // Flash movie native width
var $height ; // Flash movie native height
var $valid ; // Valid SWF file
var $fps ; // Flash movie native frame-rate
var $frames ; // Flash movie total frames
//---------------------------------------------------------------------------
// swfheader($debug) : Constructor, basically does nothing but initilize
// debug and data fields
//---------------------------------------------------------------------------
function swfheader($debug = false) {
$this->debug = $debug ;
$this->init() ;
}
//---------------------------------------------------------------------------
// init() : initialize the data fields to "empty" values
//---------------------------------------------------------------------------
function init() {
$this->valid = false ;
$this->fname = "" ;
$this->magic = "" ;
$this->compressed = false ;
$this->version = 0 ;
$this->width = 0 ;
$this->height = 0 ;
$this->size = 0 ;
$this->frames = 0 ;
$this->fps[] = Array() ;
if ($this->debug) echo "DEBUG: Data values initialized<br>" ;
}
//---------------------------------------------------------------------------
// loadswf($filename) : loads $filename and stores data from it's header
//---------------------------------------------------------------------------
function loadswf($filename) {
$this->fname = $filename ;
$fp = @fopen($filename,"rb") ;
if ($fp) {
if ($this->debug) echo "DEBUG: Opened " . $this->fname . "<br>" ;
// Read MAGIC FIELD
$this->magic = fread($fp,3) ;
if ($this->magic!="FWS" && $this->magic!="CWS") {
if ($this->debug) echo "DEBUG: " . $this->fname . " is not a valid/supported SWF file<br>" ;
$this->valid = 0 ;
} else {
// Compression
if (substr($this->magic,0,1)=="C") $this->compressed = true ;
else $this->compressed = false ;
if ($this->debug) echo "DEBUG: Read MAGIC signature: " . $this->magic . "<br>" ;
// Version
$this->version = ord(fread($fp,1)) ;
if ($this->debug) echo "DEBUG: Read VERSION: " . $this->version . "<br>" ;
// Size
$lg = 0 ;
// 4 LSB-MSB
for ($i=0;$i<4;$i++) {
$t = ord(fread($fp,1)) ;
if ($this->debug) echo "DEBUG: Partial SIZE read: " . ($t<<(8*$i)) . "<br>" ;
$lg += ($t<<(8*$i)) ;
}
$this->size = $lg ;
if ($this->debug) echo "DEBUG: Total SIZE: " . $this->size . "<br>" ;
// RECT... we will "simulate" a stream from now on... read remaining file
$buffer = fread($fp,$this->size) ;
if ($this->compressed) {
// First decompress GZ stream
$buffer = gzuncompress($buffer,$this->size) ;
}
$b = ord(substr($buffer,0,1)) ;
$buffer = substr($buffer,1) ;
$cbyte = $b ;
$bits = $b>>3 ;
if ($this->debug) echo "DEBUG: RECT field size: " . $bits . " bits<br>" ;
$cval = "" ;
// Current byte
$cbyte &= 7 ;
$cbyte<<= 5 ;
// Current bit (first byte starts off already shifted)
$cbit = 2 ;
// Must get all 4 values in the RECT
for ($vals=0;$vals<4;$vals++) {
$bitcount = 0 ;
while ($bitcount<$bits) {
if ($cbyte&128) {
$cval .= "1" ;
} else {
$cval.="0" ;
}
$cbyte<<=1 ;
$cbyte &= 255 ;
$cbit-- ;
$bitcount++ ;
// We will be needing a new byte if we run out of bits
if ($cbit<0) {
$cbyte = ord(substr($buffer,0,1)) ;
$buffer = substr($buffer,1) ;
$cbit = 7 ;
}
}
// O.k. full value stored... calculate
$c = 1 ;
$val = 0 ;
// Reverse string to allow for SUM(2^n*$atom)
if ($this->debug) echo "DEBUG: RECT binary value: " . $cval ;
$tval = strrev($cval) ;
for ($n=0;$n<strlen($tval);$n++) {
$atom = substr($tval,$n,1) ;
if ($atom=="1") $val+=$c ;
// 2^n
$c*=2 ;
}
// TWIPS to PIXELS
$val/=20 ;
if ($this->debug) echo " (" . $val . ")<br>" ;
switch ($vals) {
case 0:
// tmp value
$this->width = $val ;
break ;
case 1:
$this->width = $val - $this->width ;
break ;
case 2:
// tmp value
$this->height = $val ;
break ;
case 3:
$this->height = $val - $this->height ;
break ;
}
$cval = "" ;
}
// Frame rate
$this->fps = Array() ;
for ($i=0;$i<2;$i++) {
$t = ord(substr($buffer,0,1)) ;
$buffer = substr($buffer,1) ;
$this->fps[] = $t ;
}
if ($this->debug) echo "DEBUG: Frame rate: " . $this->fps[1] . "." . $this->fps[0] . "<br>" ;
// Frames
$this->frames = 0 ;
for ($i=0;$i<2;$i++) {
$t = ord(substr($buffer,0,1)) ;
$buffer = substr($buffer,1) ;
$this->frames += ($t<<(8*$i)) ;
}
if ($this->debug) echo "DEBUG: Frames: " . $this->frames . "<br>" ;
fclose($fp) ;
if ($this->debug) echo "DEBUG: Finished processing " . $this->fname . "<br>" ;
$this->valid = 1 ;
}
} else {
$this->valid = 0 ;
if ($this->debug) echo "DEBUG: Failed to open " . $this->fname . "<br>" ;
}
return $this->valid ;
}
//---------------------------------------------------------------------------
// show() : report to screen all the header info
//---------------------------------------------------------------------------
function show() {
if ($this->valid) {
// FNAME
echo "<b>FILE: " . $this->fname . "</b><br>" ;
// Magic
echo "<b>MAGIC:</b> " . $this->magic ;
if ($this->compressed) echo " (COMPRESSED)" ;
echo "<br>" ;
// Version
echo "<b>VERSION:</b> " . $this->version . "<br>" ;
// Size
echo "<b>SIZE:</b> " . $this->size . " bytes <br>" ;
// FRAMESIZE
echo "<b>WIDHT:</B> " . $this->width . "<br>";
echo "<b>HEIGHT:</B> " . $this->height . "<br>" ;
// FPS
echo "<b>FPS:</b> " . $this->fps[1] . "." . $this->fps[0] . " Frames/s <br>" ;
// FRAMES
echo "<b>FRAMES:</b> " . $this->frames . " FRAME <br>" ;
} else {
if (file_exists($this->fname))
echo $this->fname . "is not a valid SWF file<br>" ;
else
if ($this->fname=="")
echo "SWFHEADER->SHOW : No file loaded<br>" ;
else
echo "SWFHEDAR->SHOW : " . $this->fname . "was not found<br>" ;
}
}
//---------------------------------------------------------------------------
// display($trans) : just echo <OBJECT>/<EMBED> tags for the parsed file, if
// trans is set, WMODE is set to transparent
//---------------------------------------------------------------------------
function display($trans = false, $qlty = "high", $bgcolor = "#ffffff", $name = "") {
$endl = chr(13) ;
if ($this->valid) {
if ($name=="") $name = substr($this->fname,0,strrpos($this->fname,".")) ;
echo '<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=' . $this->version . ',0,0,0" width="' . $this->width . '" height="' . $this->height . '" id="' . $name . '" align="middle">' . $endl ;
echo '<param name="allowScriptAccess" value="sameDomain" />' . $endl ;
if ($trans) {
echo '<param name="wmode" value="transparent" />' . $endl ;
}
echo '<param name="movie" value="' . $this->fname . '" />' . $endl ;
echo '<param name="quality" value="' . $qlty . '" />' . $endl ;
echo '<param name="bgcolor" value="' . $bgcolor .'" />' . $endl ;
echo '<embed src="' . $this->fname . '" ';
if ($trans) echo 'wmode="transparent" ' ;
echo 'quality="' . $qlty . '" bgcolor="' . $bgcolor . '" width="' . $this->width . '" height="' . $this->height . '" name="' . $name . '" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />' . $endl ;
echo '</object>' . $endl ;
} else {
if ($this->debug) {
if ($this->fname=="") {
echo "SWFHEADER->DISPLAY : No loaded file in the object<br>" ;
} else {
if (file_exists($this->fname)) {
echo "SWFHEADER->DISPLAY : " . $this->fname . " is not a valid SWF file<br>" ;
} else {
echo "SWFHEADER->DISPLAY : " . $this->fname . " was not found<br>" ;
}
}
}
}
}
}
?>
这就是我需要以二进制模式打开swf，读取必要的字节并将它们转换为。。对吗？是的，读取字节并将它们解析成规范中所描述的结构。这可能很棘手，但我已经看到了如何解析它（在ActionScript中，但它们也可以翻译成C++）的例子。
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>SWF header info</title>
</head>
<body>
<? require ("swfheader.class.php") ;?>
<?
// Create a new SWF header object with debug info, open with
// disabled debug (false) for silent processing
$swf = new swfheader(true) ;
// Open the swf file...
// Replace filename accordingly to your test environment...
$swf->loadswf("test.swf") ;
// Show data as a block... you can also access data within the object
$swf->show() ;
?>
</body>
</html>