Fatal编程技术网
  • linux/
  • Linux 如何在Spike（riscv）中指定内核参数？

Linux 如何在Spike（riscv）中指定内核参数？

linux parameters kernel

Linux 如何在Spike（riscv）中指定内核参数？,linux,parameters,kernel,boot,riscv,Linux,Parameters,Kernel,Boot,Riscv,我想在引导Linux时保留一部分物理内存。常见的内核参数应该是“mem=51M memmap=512M$512M”。如何为Spike的内核指定这些参数 我的Spike执行命令是： u@ubuntu14.04:~/riscv$ spike -m2048 +disk=./root.bin bbl ./linux-3.14.33/vmlinux vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvv

我想在引导Linux时保留一部分物理内存。常见的内核参数应该是“mem=51M memmap=512M$512M”。如何为Spike的内核指定这些参数

我的Spike执行命令是：

u@ubuntu14.04:~/riscv$ spike -m2048 +disk=./root.bin bbl ./linux-3.14.33/vmlinux
              vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
                  vvvvvvvvvvvvvvvvvvvvvvvvvvvv
rrrrrrrrrrrrr       vvvvvvvvvvvvvvvvvvvvvvvvvv
rrrrrrrrrrrrrrrr      vvvvvvvvvvvvvvvvvvvvvvvv
rrrrrrrrrrrrrrrrrr    vvvvvvvvvvvvvvvvvvvvvvvv
rrrrrrrrrrrrrrrrrr    vvvvvvvvvvvvvvvvvvvvvvvv
rrrrrrrrrrrrrrrrrr    vvvvvvvvvvvvvvvvvvvvvvvv
rrrrrrrrrrrrrrrr      vvvvvvvvvvvvvvvvvvvvvv  
rrrrrrrrrrrrr       vvvvvvvvvvvvvvvvvvvvvv    
rr                vvvvvvvvvvvvvvvvvvvvvv      
rr            vvvvvvvvvvvvvvvvvvvvvvvv      rr
rrrr      vvvvvvvvvvvvvvvvvvvvvvvvvv      rrrr
rrrrrr      vvvvvvvvvvvvvvvvvvvvvv      rrrrrr
rrrrrrrr      vvvvvvvvvvvvvvvvvv      rrrrrrrr
rrrrrrrrrr      vvvvvvvvvvvvvv      rrrrrrrrrr
rrrrrrrrrrrr      vvvvvvvvvv      rrrrrrrrrrrr
rrrrrrrrrrrrrr      vvvvvv      rrrrrrrrrrrrrr
rrrrrrrrrrrrrrrr      vv      rrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrr          rrrrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrrrr      rrrrrrrrrrrrrrrrrrrr
rrrrrrrrrrrrrrrrrrrrrr  rrrrrrrrrrrrrrrrrrrrrr

       INSTRUCTION SETS WANT TO BE FREE
[    0.000000] Linux version 3.14.33-g043bb5d (guanglin@guanglin-a11-linux) (gcc version 5.2.0 (GCC) ) #2 Sun Aug 23 17:19:49 EDT 2015
[    0.000000] Detected 0x7fc00000 bytes of physical memory
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00200000-0x7fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00200000-0x7fdfffff]
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516110
[    0.000000] Kernel command line: root=/dev/htifblk0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Sorting __ex_table...
[    0.000000] Memory: 2058700K/2093056K available (1722K kernel code, 124K rwdata, 356K rodata, 68K init, 211K bss, 34356K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:2
[    0.150000] Calibrating delay using timer specific routine.. 20.01 BogoMIPS (lpj=100050)
[    0.150000] pid_max: default: 32768 minimum: 301
[    0.150000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.150000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.150000] devtmpfs: initialized
[    0.150000] NET: Registered protocol family 16
[    0.150000] bio: create slab <bio-0> at 0
[    0.150000] Switched to clocksource riscv_clocksource
[    0.150000] NET: Registered protocol family 2
[    0.150000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.150000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.150000] TCP: Hash tables configured (established 16384 bind 16384)
[    0.150000] TCP: reno registered
[    0.150000] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.150000] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.150000] NET: Registered protocol family 1
[    0.150000] futex hash table entries: 256 (order: 0, 6144 bytes)
[    0.150000] io scheduler noop registered
[    0.150000] io scheduler cfq registered (default)
[    0.150000] htifcon htif1: detected console
[    0.150000] console [htifcon0] enabled
[    0.150000] htifblk htif2: detected disk
[    0.150000] htifblk htif2: added htifblk0
[    0.150000] TCP: cubic registered
[    0.150000] VFS: Mounted root (ext2 filesystem) readonly on device 254:0.
[    0.150000] devtmpfs: mounted
[    0.150000] Freeing unused kernel memory: 68K (ffffffff80000000 - ffffffff80011000)
[    0.160000] EXT2-fs (htifblk0): warning: mounting unchecked fs, running e2fsck is recommended
/ #
它们都不起作用

如果我这样做

spike -m2048 +disk=./root.bin bbl "./linux-3.14.33/vmlinux mem=512M memmap=512M$512M"
无法打开ELF程序：./linux-3.14.33/vmlinux mem=512M memmap=512M12M

现在，linux的参数需要通过.CONFIG中的CONFIG_CMDLINE参数编译到linux中

bbl的未来版本可以改进，以支持向linux传递参数。

谢谢！这正是我可以指定内核参数的方式。 
spike -m2048 +disk=./root.bin bbl "./linux-3.14.33/vmlinux mem=512M memmap=512M$512M"