Omnet++ 如何在Velse2.0下设置节点的传输范围?
我想知道如何在Velse2.0下正确设置一个节点的传输范围,我认为我做得对,但恐怕是错的 因此,我需要澄清一下*.ini文件中定义的参数:Omnet++ 如何在Velse2.0下设置节点的传输范围?,omnet++,Omnet++,我想知道如何在Velse2.0下正确设置一个节点的传输范围,我认为我做得对,但恐怕是错的 因此,我需要澄清一下*.ini文件中定义的参数: *.connectionManager.pMax = 24.34mW # =>>> parameters to set the max interference distance by the global manager module *.connectionManager.sat = -80dBm # =>>> p
*.connectionManager.pMax = 24.34mW # =>>> parameters to set the max interference distance by the global manager module
*.connectionManager.sat = -80dBm # =>>> parameters to set the max interference distance by the global manager module
*.**.nic.phy80211p.maxTXPower = 24.34mW # =>>> what is the role of this parameter ? is it affecting the transmission range or only limiting the max TX Power ?
*.**.nic.mac80211p.txPower = 13.69mW # =>>> is it the parameter along to sensitivity that are responsible of changing transmission range ?
*.**.nic.phy80211p.sensitivity = -80dBm #for changing maximum transmission range
那么,maxTXPower和txPower之间的区别是什么?如何更改变速器档位?通过改变第一个,后一个或两者
谢谢,
maxTXPower
不用于Veines2.0的IEEE 802.11p型号
有关静脉中传输范围概念的深入讨论,请参阅中的讨论
有关计算静脉中干扰范围的深入讨论,请参阅中的讨论。
maxTXPower
不用于静脉2.0的IEEE 802.11p模型
有关静脉中传输范围概念的深入讨论,请参阅中的讨论
有关计算矿脉中干扰范围的深入讨论,请参阅中的讨论