我如何在EclipseAndroid中启动ADB？
我如何在EclipseAndroid中启动ADB我如何在EclipseAndroid中启动ADB？,android,Android,我如何在EclipseAndroid中启动ADB [2014-03-16 16:13:43 - nadh] ------------------------------ [2014-03-16 16:13:43 - nadh] Android Launch! [2014-03-16 16:13:43 - nadh] The connection to adb is down, and a severe error has occured. [2014-03-16 16:13:43 - nadh]
[2014-03-16 16:13:43 - nadh] ------------------------------
[2014-03-16 16:13:43 - nadh] Android Launch!
[2014-03-16 16:13:43 - nadh] The connection to adb is down, and a severe error has occured.
[2014-03-16 16:13:43 - nadh] You must restart adb and Eclipse.
[2014-03-16 16:13:43 - nadh] Please ensure that adb is correctly located at 'C:\Program Files (x86)\adt-bundle-windows-x86_64-20131030_2\adt-bundle-windows-x86_64-20131030\sdk\platform-tools\adb.exe' and can be executed.
如果您更新到SDK 2.3，并收到如下错误： 与adb的连接已断开，出现严重错误 “请确保adb正确位于'your_path\android sdk windows\tools\adb.exe'并可以 被处决。”
解决方案是从环境变量向类路径中的SDK工具和平台工具添加路径。然后重新启动Eclipse。要从Eclipse运行ADB，需要找到一个Eclipse命令行窗口。然后，从Eclipse中选择run/externaltools/{上面添加的命令提示符}。然后，在控制台窗口中键入
adbadb
Android Debug Bridge version 1.0.31
-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the following format:
<serial> " " <local> " " <remote> "\n"
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default
is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
adb
Android调试桥版本1.0.31
-a-指示adb侦听连接的所有接口
-d-将命令定向到唯一连接的USB设备
如果存在多个USB设备，则返回错误。
-e-将命令定向到唯一正在运行的仿真器。
如果正在运行多个仿真器，则返回错误。
-s-将命令定向到具有给定
序列号或限定符。重写ANDROID\u序列
环境变量。
-p-简单的产品名称，如“更早”，或
产品的相对/绝对路径
输出目录，如“out/target/product/project”。
如果未指定-p，则ANDROID_产品将退出
使用了环境变量，该变量必须
这是一条绝对的道路。
-H-adb服务器主机的名称（默认值：localhost）
-P-adb服务器的端口（默认值：5037）
设备[-l]-列出所有连接的设备
（“-l”还将列出设备限定符）
连接[：]-通过TCP/IP连接到设备
如果未指定端口号，则默认情况下使用端口5555。
断开连接[[：]]-断开与TCP/IP设备的连接。
如果未指定端口号，则默认情况下使用端口5555。
使用此命令时不带其他参数
将从所有连接的TCP/IP设备断开连接。
设备命令：
adb推送-将文件/目录复制到设备
adb pull[]-从设备复制文件/目录
adb sync[]-仅在更改时复制主机->设备
（-l表示列表，但不复制）
（见“亚洲开发银行帮助所有人”）
adb shell-以交互方式运行远程shell
adb shell-运行远程shell命令
adb emu-运行模拟器控制台命令
adb logcat[]-查看设备日志
adb forward—list—列出所有正向套接字连接。
该格式是具有以下格式的行列表：
“”“\n”
adb正向-正向套接字连接
正向规范是以下规范之一：
tcp:
本地摘要：
本地保留：
本地文件系统：
开发人员：
jdwp：（仅远程）
亚洲开发银行远期——无再绑定
-与“亚洲开发银行远期”相同，但失败
如果已经转发
adb forward--删除-删除特定的前向套接字连接
adb forward—全部删除—删除所有正向套接字连接
adb jdwp-列出承载jdwp传输的进程的PID
adb安装[-l][-r][-s][--algo--key--iv]
-将此程序包文件推送到设备并安装
（“-l”表示应用程序的前向锁定）
（“-r”表示重新安装应用程序，保留其数据）
（“-s”表示安装在SD卡上而不是内部存储器上）
（'--algo'、'--key'和'--iv'表示文件已加密）
adb卸载[-k]-从设备中删除此应用程序包
（“-k”表示保留数据和缓存目录）
adb bugreport-从设备返回所有信息
这应该包含在bug报告中。
adb备份[-f][-apk |-noapk][-obb |-noobb][共享|-noshared][所有][系统|-nosystem][]
-将设备数据的存档写入。
如果未提供-f选项，则写入数据
到当前目录中的“backup.ab”。
（-apk |-noapk启用/禁用.apk本身的备份
在存档中；默认值为noapk。）
（-obb |-noobb启用/禁用任何已安装apk扩展的备份
（aka.obb）与每个应用程序关联的文件；默认值
是努布。）
（-shared |-noshared启用/禁用设备的备份
共享存储/SD卡内容；默认为无共享。）
（-备份所有已安装应用程序的所有方法）
（-system |-nosystem切换是否-