Server ixgbe eth0:由于发送超时和ixgbe eth0:重置适配器而启动重置

服务器接口有时会摆动。这是随机发生的。我们将在dmesg中获取以下日志，并在syslog中捕获类似的日志

操作系统：

详情：

driver: ixgbe
version: 4.4.0-k
firmware-version: 0x80001112
expansion-rom-version: 
bus-info: 0000:41:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

日志：

---

如何解决此问题？

这更适合于服务器故障。

driver: ixgbe
version: 4.4.0-k
firmware-version: 0x80001112
expansion-rom-version: 
bus-info: 0000:41:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

ixgbe 0000:41:00.0 eth0: initiating reset due to tx timeout
ixgbe 0000:41:00.0 eth0: Reset adapter
ixgbe 0000:41:00.1 eth1: initiating reset due to tx timeout
ixgbe 0000:41:00.1 eth1: Reset adapter
ixgbe 0000:41:00.0 eth0: speed changed to 0 for port eth0
ixgbe 0000:41:00.1 eth1: speed changed to 0 for port eth1
bond0: link status definitely down for interface eth0, disabling it
bond0: now running without any active interface!
bond0: link status definitely down for interface eth1, disabling it
ixgbe 0000:41:00.0 eth0: NIC Link is Up 10 Gbps, Flow Control: RX/TX
bond0: link status definitely up for interface eth0, 10000 Mbps full duplex
bond0: first active interface up!
ixgbe 0000:41:00.1 eth1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
bond0: link status definitely up for interface eth1, 10000 Mbps full duplex
ixgbe 0000:41:00.1 eth1: initiating reset due to tx timeout
ixgbe 0000:41:00.1 eth1: Reset adapter
ixgbe 0000:41:00.1 eth1: speed changed to 0 for port eth1
bond0: link status definitely down for interface eth1, disabling it
ixgbe 0000:41:00.1 eth1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
bond0: link status definitely up for interface eth1, 10000 Mbps full duplex
ixgbe 0000:41:00.1 eth1: initiating reset due to tx timeout
ixgbe 0000:41:00.1 eth1: Reset adapter
ixgbe 0000:41:00.1 eth1: speed changed to 0 for port eth1
bond0: link status definitely down for interface eth1, disabling it
ixgbe 0000:41:00.1 eth1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
bond0: link status definitely up for interface eth1, 10000 Mbps full duplex
ixgbe 0000:41:00.1 eth1: initiating reset due to tx timeout
ixgbe 0000:41:00.1 eth1: Reset adapter
sched: RT throttling activated