elasticsearch 由于yml配置，FileBeat服务未启动

这是我的filebeat.yml文件… 每当我启动filebeat服务时，就会出现错误：1053。 可能是我在这个文件中犯了一些错误，请纠正我的错误

###################### Filebeat Configuration Example #########################

# This file is an example configuration file highlighting only the most common
# options. The filebeat.full.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html

#=========================== Filebeat prospectors =============================

filebeat.prospectors:

# Each - is a prospector. Most options can be set at the prospector level, so
# you can use different prospectors for various configurations.
# Below are the prospector specific configurations.



  # Paths that should be crawled and fetched. Glob based paths.
 paths:
- E:\ELK-STACK\logstash-tutorial-dataset.log
input_type: log
document_type: apachelogs
  # document_type: apachelogs



   #paths:
   # - E:\ELK-STACK\mylogs.log
  #fields: {log_type: mypersonal-logs}
       #- C:\Logs\GatewayService\GatewayService-Processor.Transactions-20170810
   # - C:\ECLIPSE WORKSPACE\jcgA1\jcgA1\logs-logstash.*
  # Exclude lines. A list of regular expressions to match. It drops the lines that are
  # matching any regular expression from the list.
  #exclude_lines: ["^DBG"]

  # Include lines. A list of regular expressions to match. It exports the lines that are
  # matching any regular expression from the list.
  #include_lines: ["^ERR", "^WARN"]

  # Exclude files. A list of regular expressions to match. Filebeat drops the files that
  # are matching any regular expression from the list. By default, no files are dropped.
  #exclude_files: [".gz$"]

  # Optional additional fields. These field can be freely picked
  # to add additional information to the crawled log files for filtering
  #fields:
  #  level: debug
  #  review: 1

  ### Multiline options

  # Mutiline can be used for log messages spanning multiple lines. This is common
  # for Java Stack Traces or C-Line Continuation

  # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
  #multiline.pattern: ^\[

  # Defines if the pattern set under pattern should be negated or not. Default is false.
  #multiline.negate: false

  # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
  # that was (not) matched before or after or as long as a pattern is not matched based on negate.
  # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
  #multiline.match: after


#================================ General =====================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:

# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output.
#fields:
#  env: staging

#================================ Outputs =====================================

# Configure what outputs to use when sending the data collected by the beat.
# Multiple outputs may be used.

#-------------------------- Elasticsearch output ------------------------------
#output.elasticsearch:
  # Array of hosts to connect to.
 # hosts: ["localhost:9200"]

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

#----------------------------- Logstash output --------------------------------
output.logstash:
  # The Logstash hosts
  hosts: ["localhost:5043"]

  # Optional SSL. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

#================================ Logging =====================================

# Sets log level. The default log level is info.
# Available log levels are: critical, error, warning, info, debug
#logging.level: debug

# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publish", "service".
#logging.selectors: ["*"]

实际上，我想做的是，我试图使用多个指定“document\u type”的日志，如果我删除了“document\u type”，那么它就可以工作了，但是为什么“document\u type”（正如我在filebeat 5.5中看到的那样）或“fields”在其中不起作用呢

---

请提供帮助。

您的配置文件中有语法错误。

filebeat.prospectors

键需要一个数组值，但您要传递一个哈希值

另外，您还有缩进问题

这是您的配置文件的更正版本（为了简洁起见，没有注释）

---

确保您的yml字段格式正确：@Val是的，我做了某些更改，现在格式正确，并且在启动服务时再次显示错误。输出：-{“Output.logstash”：{“hosts”：[“localhost:5043”]}，filebeat.prospectors:{“-input_type”：“log”，“path”：[“E:\\ELK-STACK\\logstash tutorial dataset.log”]}，“文档类型”：“apachelogs”}感谢它成功了！！现在我还有一个问题，我有我的项目的非结构化日志真实性…我如何在它上应用grok模式，因为它不遵循相同的模式。

filebeat.prospectors:
-
  paths:
  - E:\ELK-STACK\logstash-tutorial-dataset.log
  input_type: log
  document_type: apachelogs
output.logstash:
  hosts: ["localhost:5043"]