Fatal编程技术网

Network programming MirageOS和Xen-虚拟接口无法获取IP地址

network-programming

Network programming MirageOS和Xen-虚拟接口无法获取IP地址,network-programming,dhcp,xen,mirage,Network Programming,Dhcp,Xen,Mirage,我已经按照本指南编译并构建了MirageOS unikernel for XEN（主要是最后一部分，步骤4，stackv4），但在启动它之后，我无法通过DHCP发现阶段，如以下日志所示： Parsing config from stackv4.xl Xen Minimal OS! Initialising console ... done. getenv(OCAMLRUNPARAM) -> null getenv(CAMLRUNPARAM) -> null getenv(PATH)

我已经按照本指南编译并构建了MirageOS unikernel for XEN（主要是最后一部分，步骤4，stackv4），但在启动它之后，我无法通过DHCP发现阶段，如以下日志所示：

Parsing config from stackv4.xl
Xen Minimal OS!
Initialising console ... done.
getenv(OCAMLRUNPARAM) -> null
getenv(CAMLRUNPARAM) -> null
getenv(PATH) -> null
Unsupported function lseek called in Mini-OS kernel
Unsupported function lseek called in Mini-OS kernel
Unsupported function lseek called in Mini-OS kernel
getenv(OCAMLRUNPARAM) -> null
getenv(CAMLRUNPARAM) -> null
getenv(TMPDIR) -> null
getenv(TEMP) -> null
Netif: add resume hook
Netif.connect 0
Netfront.create: id=0 domid=0
 sg:true gso_tcpv4:true rx_copy:true rx_flip:false smart_poll:false
MAC: 00:16:3e:7e:c0:0d
Attempt to open(/dev/urandom)!
Unsupported function getpid called in Mini-OS kernel
Unsupported function getppid called in Mini-OS kernel
Manager: connect
Manager: configuring
DHCP: start discovery

Sending DHCP broadcast (length 552)
DHCP: start discovery

Sending DHCP broadcast (length 552)
DHCP: start discovery

Sending DHCP broadcast (length 552)
DHCP: start discovery

....
我的MirageOS单内核配置：

name = 'stackv4'
kernel = '/home/mirage/mirage-skeleton/stackv4/mir-stackv4.xen'
builder = 'linux'
memory = 256
on_crash = 'preserve'

disk = [  ]

# if your system uses openvswitch then either edit /etc/xen/xl.conf and set
#     vif.default.script="vif-openvswitch"
# or add "script=vif-openvswitch," before the "bridge=" below:
vif = [ 'bridge=xenbr0' ]

eth0      Link encap:Ethernet  HWaddr 02:01:06:02:83:c0
          inet6 addr: fe80::1:6ff:fe02:83c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:110876 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14602 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9736700 (9.7 MB)  TX bytes:1999992 (1.9 MB)
          Interrupt:117

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:384394 errors:0 dropped:0 overruns:0 frame:0
          TX packets:384394 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:26761500 (26.7 MB)  TX bytes:26761500 (26.7 MB)

vif16.0   Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:58 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11289 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:33640 (33.6 KB)  TX bytes:778590 (778.5 KB)

xenbr0    Link encap:Ethernet  HWaddr 02:01:06:02:83:c0
          inet addr:131.159.24.167  Bcast:131.159.25.255  Mask:255.255.254.0
          inet6 addr: fe80::1:6ff:fe02:83c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:110689 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11987 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8328727 (8.3 MB)  TX bytes:1703101 (1.7 MB)

bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.0201060283c0       no              eth0
                                                        vif16.0

auto lo
iface lo inet loopback

auto eth0
#iface eth0 inet dhcp
#  up ip link set eth0 up

iface eth0 inet manual

auto xenbr0
    iface xenbr0 inet dhcp
            bridge_ports eth0
我的网络配置：

name = 'stackv4'
kernel = '/home/mirage/mirage-skeleton/stackv4/mir-stackv4.xen'
builder = 'linux'
memory = 256
on_crash = 'preserve'

disk = [  ]

# if your system uses openvswitch then either edit /etc/xen/xl.conf and set
#     vif.default.script="vif-openvswitch"
# or add "script=vif-openvswitch," before the "bridge=" below:
vif = [ 'bridge=xenbr0' ]

eth0      Link encap:Ethernet  HWaddr 02:01:06:02:83:c0
          inet6 addr: fe80::1:6ff:fe02:83c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:110876 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14602 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9736700 (9.7 MB)  TX bytes:1999992 (1.9 MB)
          Interrupt:117

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:384394 errors:0 dropped:0 overruns:0 frame:0
          TX packets:384394 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:26761500 (26.7 MB)  TX bytes:26761500 (26.7 MB)

vif16.0   Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:58 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11289 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:33640 (33.6 KB)  TX bytes:778590 (778.5 KB)

xenbr0    Link encap:Ethernet  HWaddr 02:01:06:02:83:c0
          inet addr:131.159.24.167  Bcast:131.159.25.255  Mask:255.255.254.0
          inet6 addr: fe80::1:6ff:fe02:83c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:110689 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11987 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8328727 (8.3 MB)  TX bytes:1703101 (1.7 MB)

bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.0201060283c0       no              eth0
                                                        vif16.0

auto lo
iface lo inet loopback

auto eth0
#iface eth0 inet dhcp
#  up ip link set eth0 up

iface eth0 inet manual

auto xenbr0
    iface xenbr0 inet dhcp
            bridge_ports eth0
我的网桥配置：

name = 'stackv4'
kernel = '/home/mirage/mirage-skeleton/stackv4/mir-stackv4.xen'
builder = 'linux'
memory = 256
on_crash = 'preserve'

disk = [  ]

# if your system uses openvswitch then either edit /etc/xen/xl.conf and set
#     vif.default.script="vif-openvswitch"
# or add "script=vif-openvswitch," before the "bridge=" below:
vif = [ 'bridge=xenbr0' ]

eth0      Link encap:Ethernet  HWaddr 02:01:06:02:83:c0
          inet6 addr: fe80::1:6ff:fe02:83c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:110876 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14602 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9736700 (9.7 MB)  TX bytes:1999992 (1.9 MB)
          Interrupt:117

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:384394 errors:0 dropped:0 overruns:0 frame:0
          TX packets:384394 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:26761500 (26.7 MB)  TX bytes:26761500 (26.7 MB)

vif16.0   Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:58 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11289 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:33640 (33.6 KB)  TX bytes:778590 (778.5 KB)

xenbr0    Link encap:Ethernet  HWaddr 02:01:06:02:83:c0
          inet addr:131.159.24.167  Bcast:131.159.25.255  Mask:255.255.254.0
          inet6 addr: fe80::1:6ff:fe02:83c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:110689 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11987 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8328727 (8.3 MB)  TX bytes:1703101 (1.7 MB)

bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.0201060283c0       no              eth0
                                                        vif16.0

auto lo
iface lo inet loopback

auto eth0
#iface eth0 inet dhcp
#  up ip link set eth0 up

iface eth0 inet manual

auto xenbr0
    iface xenbr0 inet dhcp
            bridge_ports eth0
My/etc/网络/接口：

name = 'stackv4'
kernel = '/home/mirage/mirage-skeleton/stackv4/mir-stackv4.xen'
builder = 'linux'
memory = 256
on_crash = 'preserve'

disk = [  ]

# if your system uses openvswitch then either edit /etc/xen/xl.conf and set
#     vif.default.script="vif-openvswitch"
# or add "script=vif-openvswitch," before the "bridge=" below:
vif = [ 'bridge=xenbr0' ]

eth0      Link encap:Ethernet  HWaddr 02:01:06:02:83:c0
          inet6 addr: fe80::1:6ff:fe02:83c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:110876 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14602 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9736700 (9.7 MB)  TX bytes:1999992 (1.9 MB)
          Interrupt:117

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:384394 errors:0 dropped:0 overruns:0 frame:0
          TX packets:384394 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:26761500 (26.7 MB)  TX bytes:26761500 (26.7 MB)

vif16.0   Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:58 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11289 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:33640 (33.6 KB)  TX bytes:778590 (778.5 KB)

xenbr0    Link encap:Ethernet  HWaddr 02:01:06:02:83:c0
          inet addr:131.159.24.167  Bcast:131.159.25.255  Mask:255.255.254.0
          inet6 addr: fe80::1:6ff:fe02:83c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:110689 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11987 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8328727 (8.3 MB)  TX bytes:1703101 (1.7 MB)

bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.0201060283c0       no              eth0
                                                        vif16.0

auto lo
iface lo inet loopback

auto eth0
#iface eth0 inet dhcp
#  up ip link set eth0 up

iface eth0 inet manual

auto xenbr0
    iface xenbr0 inet dhcp
            bridge_ports eth0
我试图了解问题所在，但似乎一切都是正确的（根据另一个指南）。

一些建议：

  • 检查您是否正在运行DHCP服务器
  • 在桥接器机器（可能是dom0）上运行
    tcpdump
    或
    wireshark
    ，查看有哪些通信量。你看到DHCP请求了吗
  • 尝试配置一个静态IP地址，看看是否有效
  • 试着运行一个Linux客户机，看看DHCP是否在那里工作（并比较数据包捕获情况）
    • 一些建议：

  • 检查您是否正在运行DHCP服务器
  • 在桥接器机器（可能是dom0）上运行
    tcpdump
    或
    wireshark
    ，查看有哪些通信量。你看到DHCP请求了吗
  • 尝试配置一个静态IP地址，看看是否有效
  • 试着运行一个Linux客户机，看看DHCP是否在那里工作（并比较数据包捕获情况）
    • 这与编程无关，应该发布在ServerFault上。嗯，我不确定是否要发布在ServerFault上。主要是因为它可能是单内核编程错误或配置错误。严格来说，这可能不仅仅与网络方面有关。是的，可能，但这绝对不是与编程相关的问题；）这与编程无关，应该发布在ServerFault上。嗯，我不确定是否要发布在ServerFault上。主要是因为它可能是单内核编程错误或配置错误。严格来说，这可能不仅仅与网络方面有关。是的，可能，但这绝对不是与编程相关的问题；）非常感谢，DHCP服务器出现配置错误。非常感谢，DHCP服务器出现配置错误。