时间。睡眠(2) sys.stderr.write(“5秒后的stderr输出”) 打印“标准DIN上的下线” sys.stderr.write(“stderr上的下线\n”) 时间。睡眠(1) 打印“哇,我们工作结束了!”, 其他: os.environ[“PYTHONUNBUFFERED”]=“1” 尝试: p=Popen(argv+[“-sub-”], bufsize=0,#缓存行 标准偏差=管道,标准偏差=管道,标准偏差=管道) 除Windows错误外,W: 如果W.winerror==193: p=Popen(argv+[“-sub-”], shell=True,#尝试通过shell运行 bufsize=0,#缓存行 标准偏差=管道,标准偏差=管道,标准偏差=管道) 其他: 提升 inp=Queue.Queue() sout=io.open(p.stdout.fileno(),'rb',closefd=False) serr=io.open(p.stderr.fileno(),'rb',closefd=False) def泵(流,类别): queue=queue.queue() def rdr(): 尽管如此: buf=stream.read1(8192) 如果len(buf)>0: 队列放置(buf) 其他: queue.put(无) 返回 def clct(): 活动=真 激活时: r=queue.get() 尝试: 尽管如此: r1=queue.get(超时=0.005) 如果r1为无: 活动=错误 打破 其他: r+=r1 队列除外。空: 通过 投入产出((r类)) 对于[rdr,clct]中的tgt: th=线程(目标=tgt) th.setDaemon(True) th.start() 泵(sout,'stdout') 泵(serr,‘stderr’) 而p.poll()为无: #应用程序仍在运行 尝试: chan,line=inp.get(超时=1.0) 如果chan=='stdout': 打印“STDOUT>>”,第行,“
根据J.F.Sebastian的答案和其他几个来源,我已经组合了一个简单的子流程管理器。它提供了请求非阻塞读取,以及并行运行多个流程。它不使用任何特定于操作系统的调用(我知道),因此应该在任何地方工作 它可以从pypi获得,因此只需时间。睡眠(2) sys.stderr.write(“5秒后的stderr输出”) 打印“标准DIN上的下线” sys.stderr.write(“stderr上的下线\n”) 时间。睡眠(1) 打印“哇,我们工作结束了!”, 其他: os.environ[“PYTHONUNBUFFERED”]=“1” 尝试: p=Popen(argv+[“-sub-”], bufsize=0,#缓存行 标准偏差=管道,标准偏差=管道,标准偏差=管道) 除Windows错误外,W: 如果W.winerror==193: p=Popen(argv+[“-sub-”], shell=True,#尝试通过shell运行 bufsize=0,#缓存行 标准偏差=管道,标准偏差=管道,标准偏差=管道) 其他: 提升 inp=Queue.Queue() sout=io.open(p.stdout.fileno(),'rb',closefd=False) serr=io.open(p.stderr.fileno(),'rb',closefd=False) def泵(流,类别): queue=queue.queue() def rdr(): 尽管如此: buf=stream.read1(8192) 如果len(buf)>0: 队列放置(buf) 其他: queue.put(无) 返回 def clct(): 活动=真 激活时: r=queue.get() 尝试: 尽管如此: r1=queue.get(超时=0.005) 如果r1为无: 活动=错误 打破 其他: r+=r1 队列除外。空: 通过 投入产出((r类)) 对于[rdr,clct]中的tgt: th=线程(目标=tgt) th.setDaemon(True) th.start() 泵(sout,'stdout') 泵(serr,‘stderr’) 而p.poll()为无: #应用程序仍在运行 尝试: chan,line=inp.get(超时=1.0) 如果chan=='stdout': 打印“STDOUT>>”,第行,“,python,io,subprocess,nonblocking,Python,Io,Subprocess,Nonblocking,根据J.F.Sebastian的答案和其他几个来源,我已经组合了一个简单的子流程管理器。它提供了请求非阻塞读取,以及并行运行多个流程。它不使用任何特定于操作系统的调用(我知道),因此应该在任何地方工作 它可以从pypi获得,因此只需pip安装shelljob。有关示例和完整文档,请参阅。Python3.4引入了新的异步IO-- 该方法类似于--定义协议,并在数据准备就绪后立即调用其方法: #!/usr/bin/env python3 import asyncio import os class
pip安装shelljob
。有关示例和完整文档,请参阅。Python3.4引入了新的异步IO--
该方法类似于--定义协议,并在数据准备就绪后立即调用其方法:
#!/usr/bin/env python3
import asyncio
import os
class SubprocessProtocol(asyncio.SubprocessProtocol):
def pipe_data_received(self, fd, data):
if fd == 1: # got stdout data (bytes)
print(data)
def connection_lost(self, exc):
loop.stop() # end loop.run_forever()
if os.name == 'nt':
loop = asyncio.ProactorEventLoop() # for subprocess' pipes on Windows
asyncio.set_event_loop(loop)
else:
loop = asyncio.get_event_loop()
try:
loop.run_until_complete(loop.subprocess_exec(SubprocessProtocol,
"myprogram.exe", "arg1", "arg2"))
loop.run_forever()
finally:
loop.close()
看
有一个高级接口asyncio.create_subprocess_exec()
,该接口返回允许使用
(附文):
readline\u和\u kill()
执行以下任务:
- 启动子流程,将其标准输出重定向到管道
- 从子进程的stdout异步读取一行
- 终止子进程
- 等待它退出
如有必要,每一步都会受到超时秒数的限制。为什么要打扰线程和队列? 与readline()不同,BufferedReader.read1()不会阻止等待\r\n,如果有任何输出传入,它会尽快返回
#!/usr/bin/python
from subprocess import Popen, PIPE, STDOUT
import io
def __main__():
try:
p = Popen( ["ping", "-n", "3", "127.0.0.1"], stdin=PIPE, stdout=PIPE, stderr=STDOUT )
except: print("Popen failed"); quit()
sout = io.open(p.stdout.fileno(), 'rb', closefd=False)
while True:
buf = sout.read1(1024)
if len(buf) == 0: break
print buf,
if __name__ == '__main__':
__main__()
在我的例子中,我需要一个日志模块来捕获后台应用程序的输出并对其进行增强(添加时间戳、颜色等) 我最终得到了一个执行实际I/O的后台线程。以下代码仅适用于POSIX平台。我剥离了非必要部分
如果有人要用这个野兽做长时间运行,考虑管理开放描述符。在我的例子中,这不是一个大问题。< /P>
# -*- python -*-
import fcntl
import threading
import sys, os, errno
import subprocess
class Logger(threading.Thread):
def __init__(self, *modules):
threading.Thread.__init__(self)
try:
from select import epoll, EPOLLIN
self.__poll = epoll()
self.__evt = EPOLLIN
self.__to = -1
except:
from select import poll, POLLIN
print 'epoll is not available'
self.__poll = poll()
self.__evt = POLLIN
self.__to = 100
self.__fds = {}
self.daemon = True
self.start()
def run(self):
while True:
events = self.__poll.poll(self.__to)
for fd, ev in events:
if (ev&self.__evt) != self.__evt:
continue
try:
self.__fds[fd].run()
except Exception, e:
print e
def add(self, fd, log):
assert not self.__fds.has_key(fd)
self.__fds[fd] = log
self.__poll.register(fd, self.__evt)
class log:
logger = Logger()
def __init__(self, name):
self.__name = name
self.__piped = False
def fileno(self):
if self.__piped:
return self.write
self.read, self.write = os.pipe()
fl = fcntl.fcntl(self.read, fcntl.F_GETFL)
fcntl.fcntl(self.read, fcntl.F_SETFL, fl | os.O_NONBLOCK)
self.fdRead = os.fdopen(self.read)
self.logger.add(self.read, self)
self.__piped = True
return self.write
def __run(self, line):
self.chat(line, nl=False)
def run(self):
while True:
try: line = self.fdRead.readline()
except IOError, exc:
if exc.errno == errno.EAGAIN:
return
raise
self.__run(line)
def chat(self, line, nl=True):
if nl: nl = '\n'
else: nl = ''
sys.stdout.write('[%s] %s%s' % (self.__name, line, nl))
def system(command, param=[], cwd=None, env=None, input=None, output=None):
args = [command] + param
p = subprocess.Popen(args, cwd=cwd, stdout=output, stderr=output, stdin=input, env=env, bufsize=0)
p.wait()
ls = log('ls')
ls.chat('go')
system("ls", ['-l', '/'], output=ls)
date = log('date')
date.chat('go')
system("date", output=date)
下面是一个支持python中非阻塞读取和后台写入的模块: 提供一个函数 非block_read,它将从流中读取数据(如果可用),否则返回空字符串(如果流在另一端关闭并且所有可能的数据都已读取,则返回无)
您也可以考虑Python子进程2模块,
它添加到子流程模块。因此,在从“subprocess.Popen”返回的对象上添加了一个附加方法runInBackground。这将启动一个线程并返回一个对象,该对象将在写入stdout/stderr时自动填充,而不会阻塞主线程享受吧!在此处添加此答案,因为它提供了在Windows和Unix上设置非阻塞管道的功能 所有
c类型
的详细信息都要感谢您
有一个稍加修改的版本可在Unix和Windows系统上使用
- Python3兼容(只需稍作改动)
- 包括posix版本,并定义用于其中一个版本的异常
#pipe_non_blocking.py(模块)
"""
示例用法:
p=子进程Popen(
指挥部,
stdout=子流程.PIPE,
)
管道非阻塞集(p.stdout.fileno())
尝试:
data=os.read(p.stdout.fileno(),1)
除PortableBlockingIOError外,例如:
如果不是管道,则非阻塞是错误阻塞(例如):
加薪
"""
__全部(
“管道非阻塞集”,
“管道非阻塞是错误阻塞”,
“PortableBlockingIOError”,
)
导入操作系统
如果os.name==“nt”:
def管道非阻塞组件(fd):
#常量可以全局定义,但避免污染名称空间
#感谢:https://stackoverflow.com/questions/34504970
导入msvcrt
从ctypes导入Windell、byref、wintypes、WinError、指针
从ctypes.wintypes导入句柄、DWORD、BOOL
LPDWORD=指针(DWORD)
PIPE_NOWAIT=wintypes.DWORD(0x00000001)
import fcntl
import os
import sys
# make stdin a non-blocking file
fd = sys.stdin.fileno()
fl = fcntl.fcntl(fd, fcntl.F_GETFL)
fcntl.fcntl(fd, fcntl.F_SETFL, fl | os.O_NONBLOCK)
# user input handling thread
while mainThreadIsRunning:
try: input = sys.stdin.readline()
except: continue
handleInput(input)
import subprocess #no new requirements
def readAllSoFar(proc, retVal=''):
while (select.select([proc.stdout],[],[],0)[0]!=[]):
retVal+=proc.stdout.read(1)
return retVal
p = subprocess.Popen(['/bin/ls'], stdout=subprocess.PIPE)
while not p.poll():
print (readAllSoFar(p))
lines = ['']
while not p.poll():
lines = readAllSoFar(p, lines[-1]).split('\n')
for a in range(len(lines)-1):
print a
lines = readAllSoFar(p, lines[-1]).split('\n')
for a in range(len(lines)-1):
print a
import sys
from subprocess import PIPE, Popen
from threading import Thread
try:
from queue import Queue, Empty
except ImportError:
from Queue import Queue, Empty # python 2.x
ON_POSIX = 'posix' in sys.builtin_module_names
def enqueue_output(out, queue):
for line in iter(out.readline, b''):
queue.put(line)
out.close()
p = Popen(['myprogram.exe'], stdout=PIPE, bufsize=1, close_fds=ON_POSIX)
q = Queue()
t = Thread(target=enqueue_output, args=(p.stdout, q))
t.daemon = True # thread dies with the program
t.start()
# ... do other things here
# read line without blocking
try: line = q.get_nowait() # or q.get(timeout=.1)
except Empty:
print('no output yet')
else: # got line
# ... do something with line
import fcntl
def non_block_read(output):
fd = output.fileno()
fl = fcntl.fcntl(fd, fcntl.F_GETFL)
fcntl.fcntl(fd, fcntl.F_SETFL, fl | os.O_NONBLOCK)
try:
return output.read()
except:
return ""
# Use example
from subprocess import *
sb = Popen("echo test && sleep 1000", shell=True, stdout=PIPE)
sb.kill()
# sb.stdout.read() # <-- This will block
non_block_read(sb.stdout)
'test\n'
from twisted.internet import protocol, reactor
class MyProcessProtocol(protocol.ProcessProtocol):
def outReceived(self, data):
print data
proc = MyProcessProtocol()
reactor.spawnProcess(proc, './myprogram', ['./myprogram', 'arg1', 'arg2', 'arg3'])
reactor.run()
easy_install tornado_subprocess
import tornado_subprocess
import tornado.ioloop
def print_res( status, stdout, stderr ) :
print status, stdout, stderr
if status == 0:
print "OK:"
print stdout
else:
print "ERROR:"
print stderr
t = tornado_subprocess.Subprocess( print_res, timeout=30, args=[ "cat", "/etc/passwd" ] )
t.start()
tornado.ioloop.IOLoop.instance().start()
class MyHandler(tornado.web.RequestHandler):
def on_done(self, status, stdout, stderr):
self.write( stdout )
self.finish()
@tornado.web.asynchronous
def get(self):
t = tornado_subprocess.Subprocess( self.on_done, timeout=30, args=[ "cat", "/etc/passwd" ] )
t.start()
from subprocess import Popen, PIPE
from threading import Thread
def process_output(myprocess): #output-consuming thread
nextline = None
buf = ''
while True:
#--- extract line using read(1)
out = myprocess.stdout.read(1)
if out == '' and myprocess.poll() != None: break
if out != '':
buf += out
if out == '\n':
nextline = buf
buf = ''
if not nextline: continue
line = nextline
nextline = None
#--- do whatever you want with line here
print 'Line is:', line
myprocess.stdout.close()
myprocess = Popen('myprogram.exe', stdout=PIPE) #output-producing process
p1 = Thread(target=process_output, args=(myprocess,)) #output-consuming thread
p1.daemon = True
p1.start()
#--- do whatever here and then kill process and thread if needed
if myprocess.poll() == None: #kill process; will automatically stop thread
myprocess.kill()
myprocess.wait()
if p1 and p1.is_alive(): #wait for thread to finish
p1.join()
import io
from subprocess import PIPE, Popen
p = Popen(['myprogram.exe'], stdout=PIPE)
SLEEP_DELAY = 0.001
# Create an io.BufferedReader on the file descriptor for stdout
with io.open(p.stdout.fileno(), 'rb', closefd=False) as buffer:
while p.poll() == None:
time.sleep(SLEEP_DELAY)
while '\n' in bufferedStdout.peek(bufferedStdout.buffer_size):
line = buffer.readline()
# do stuff with the line
# Handle any remaining output after the process has ended
while buffer.peek():
line = buffer.readline()
# do stuff with the line
#!/usr/bin/python
#
# Runner with stdout/stderr catcher
#
from sys import argv
from subprocess import Popen, PIPE
import os, io
from threading import Thread
import Queue
def __main__():
if (len(argv) > 1) and (argv[-1] == "-sub-"):
import time, sys
print "Application runned!"
time.sleep(2)
print "Slept 2 second"
time.sleep(1)
print "Slept 1 additional second",
time.sleep(2)
sys.stderr.write("Stderr output after 5 seconds")
print "Eol on stdin"
sys.stderr.write("Eol on stderr\n")
time.sleep(1)
print "Wow, we have end of work!",
else:
os.environ["PYTHONUNBUFFERED"]="1"
try:
p = Popen( argv + ["-sub-"],
bufsize=0, # line-buffered
stdin=PIPE, stdout=PIPE, stderr=PIPE )
except WindowsError, W:
if W.winerror==193:
p = Popen( argv + ["-sub-"],
shell=True, # Try to run via shell
bufsize=0, # line-buffered
stdin=PIPE, stdout=PIPE, stderr=PIPE )
else:
raise
inp = Queue.Queue()
sout = io.open(p.stdout.fileno(), 'rb', closefd=False)
serr = io.open(p.stderr.fileno(), 'rb', closefd=False)
def Pump(stream, category):
queue = Queue.Queue()
def rdr():
while True:
buf = stream.read1(8192)
if len(buf)>0:
queue.put( buf )
else:
queue.put( None )
return
def clct():
active = True
while active:
r = queue.get()
try:
while True:
r1 = queue.get(timeout=0.005)
if r1 is None:
active = False
break
else:
r += r1
except Queue.Empty:
pass
inp.put( (category, r) )
for tgt in [rdr, clct]:
th = Thread(target=tgt)
th.setDaemon(True)
th.start()
Pump(sout, 'stdout')
Pump(serr, 'stderr')
while p.poll() is None:
# App still working
try:
chan,line = inp.get(timeout = 1.0)
if chan=='stdout':
print "STDOUT>>", line, "<?<"
elif chan=='stderr':
print " ERROR==", line, "=?="
except Queue.Empty:
pass
print "Finish"
if __name__ == '__main__':
__main__()
#!/usr/bin/env python3
import asyncio
import os
class SubprocessProtocol(asyncio.SubprocessProtocol):
def pipe_data_received(self, fd, data):
if fd == 1: # got stdout data (bytes)
print(data)
def connection_lost(self, exc):
loop.stop() # end loop.run_forever()
if os.name == 'nt':
loop = asyncio.ProactorEventLoop() # for subprocess' pipes on Windows
asyncio.set_event_loop(loop)
else:
loop = asyncio.get_event_loop()
try:
loop.run_until_complete(loop.subprocess_exec(SubprocessProtocol,
"myprogram.exe", "arg1", "arg2"))
loop.run_forever()
finally:
loop.close()
#!/usr/bin/env python3.5
import asyncio
import locale
import sys
from asyncio.subprocess import PIPE
from contextlib import closing
async def readline_and_kill(*args):
# start child process
process = await asyncio.create_subprocess_exec(*args, stdout=PIPE)
# read line (sequence of bytes ending with b'\n') asynchronously
async for line in process.stdout:
print("got line:", line.decode(locale.getpreferredencoding(False)))
break
process.kill()
return await process.wait() # wait for the child process to exit
if sys.platform == "win32":
loop = asyncio.ProactorEventLoop()
asyncio.set_event_loop(loop)
else:
loop = asyncio.get_event_loop()
with closing(loop):
sys.exit(loop.run_until_complete(readline_and_kill(
"myprogram.exe", "arg1", "arg2")))
#!/usr/bin/python
from subprocess import Popen, PIPE, STDOUT
import io
def __main__():
try:
p = Popen( ["ping", "-n", "3", "127.0.0.1"], stdin=PIPE, stdout=PIPE, stderr=STDOUT )
except: print("Popen failed"); quit()
sout = io.open(p.stdout.fileno(), 'rb', closefd=False)
while True:
buf = sout.read1(1024)
if len(buf) == 0: break
print buf,
if __name__ == '__main__':
__main__()
# -*- python -*-
import fcntl
import threading
import sys, os, errno
import subprocess
class Logger(threading.Thread):
def __init__(self, *modules):
threading.Thread.__init__(self)
try:
from select import epoll, EPOLLIN
self.__poll = epoll()
self.__evt = EPOLLIN
self.__to = -1
except:
from select import poll, POLLIN
print 'epoll is not available'
self.__poll = poll()
self.__evt = POLLIN
self.__to = 100
self.__fds = {}
self.daemon = True
self.start()
def run(self):
while True:
events = self.__poll.poll(self.__to)
for fd, ev in events:
if (ev&self.__evt) != self.__evt:
continue
try:
self.__fds[fd].run()
except Exception, e:
print e
def add(self, fd, log):
assert not self.__fds.has_key(fd)
self.__fds[fd] = log
self.__poll.register(fd, self.__evt)
class log:
logger = Logger()
def __init__(self, name):
self.__name = name
self.__piped = False
def fileno(self):
if self.__piped:
return self.write
self.read, self.write = os.pipe()
fl = fcntl.fcntl(self.read, fcntl.F_GETFL)
fcntl.fcntl(self.read, fcntl.F_SETFL, fl | os.O_NONBLOCK)
self.fdRead = os.fdopen(self.read)
self.logger.add(self.read, self)
self.__piped = True
return self.write
def __run(self, line):
self.chat(line, nl=False)
def run(self):
while True:
try: line = self.fdRead.readline()
except IOError, exc:
if exc.errno == errno.EAGAIN:
return
raise
self.__run(line)
def chat(self, line, nl=True):
if nl: nl = '\n'
else: nl = ''
sys.stdout.write('[%s] %s%s' % (self.__name, line, nl))
def system(command, param=[], cwd=None, env=None, input=None, output=None):
args = [command] + param
p = subprocess.Popen(args, cwd=cwd, stdout=output, stderr=output, stdin=input, env=env, bufsize=0)
p.wait()
ls = log('ls')
ls.chat('go')
system("ls", ['-l', '/'], output=ls)
date = log('date')
date.chat('go')
system("date", output=date)
def non_blocking_readlines(f, chunk=1024):
"""
Iterate over lines, yielding b'' when nothings left
or when new data is not yet available.
stdout_iter = iter(non_blocking_readlines(process.stdout))
line = next(stdout_iter) # will be a line or b''.
"""
import os
from .pipe_non_blocking import (
pipe_non_blocking_set,
pipe_non_blocking_is_error_blocking,
PortableBlockingIOError,
)
fd = f.fileno()
pipe_non_blocking_set(fd)
blocks = []
while True:
try:
data = os.read(fd, chunk)
if not data:
# case were reading finishes with no trailing newline
yield b''.join(blocks)
blocks.clear()
except PortableBlockingIOError as ex:
if not pipe_non_blocking_is_error_blocking(ex):
raise ex
yield b''
continue
while True:
n = data.find(b'\n')
if n == -1:
break
yield b''.join(blocks) + data[:n + 1]
data = data[n + 1:]
blocks.clear()
blocks.append(data)
import os
import sys
import time
import fcntl
import subprocess
def async_read(fd):
# set non-blocking flag while preserving old flags
fl = fcntl.fcntl(fd, fcntl.F_GETFL)
fcntl.fcntl(fd, fcntl.F_SETFL, fl | os.O_NONBLOCK)
# read char until EOF hit
while True:
try:
ch = os.read(fd.fileno(), 1)
# EOF
if not ch: break
sys.stdout.write(ch)
except OSError:
# waiting for data be available on fd
pass
def shell(args, async=True):
# merge stderr and stdout
proc = subprocess.Popen(args, shell=False, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
if async: async_read(proc.stdout)
sout, serr = proc.communicate()
return (sout, serr)
if __name__ == '__main__':
cmd = 'ping 8.8.8.8'
sout, serr = shell(cmd.split())
#!/usr/bin/env python
# -*- coding: utf-8 -*-
import os
import sys
import select
import termios
import tty
import pty
from subprocess import Popen
command = 'bash'
# command = 'docker run -it --rm centos /bin/bash'.split()
# save original tty setting then set it to raw mode
old_tty = termios.tcgetattr(sys.stdin)
tty.setraw(sys.stdin.fileno())
# open pseudo-terminal to interact with subprocess
master_fd, slave_fd = pty.openpty()
# use os.setsid() make it run in a new process group, or bash job control will not be enabled
p = Popen(command,
preexec_fn=os.setsid,
stdin=slave_fd,
stdout=slave_fd,
stderr=slave_fd,
universal_newlines=True)
while p.poll() is None:
r, w, e = select.select([sys.stdin, master_fd], [], [])
if sys.stdin in r:
d = os.read(sys.stdin.fileno(), 10240)
os.write(master_fd, d)
elif master_fd in r:
o = os.read(master_fd, 10240)
if o:
os.write(sys.stdout.fileno(), o)
# restore tty settings back
termios.tcsetattr(sys.stdin, termios.TCSADRAIN, old_tty)
class workerThread(QThread):
def __init__(self, cmd):
QThread.__init__(self)
self.cmd = cmd
self.result = None ## return code
self.error = None ## flag indicates an error
self.errorstr = "" ## info message about the error
def __del__(self):
self.wait()
DEBUG("Thread removed")
def run(self):
cmd_list = self.cmd.split(" ")
try:
cmd = subprocess.Popen(cmd_list, bufsize=1, stdin=None
, universal_newlines=True
, stderr=subprocess.PIPE
, stdout=subprocess.PIPE)
except OSError:
self.error = 1
self.errorstr = "Failed to execute " + self.cmd
ERROR(self.errorstr)
finally:
VERBOSE("task started...")
import select
while True:
try:
r,w,x = select.select([cmd.stdout, cmd.stderr],[],[])
if cmd.stderr in r:
line = cmd.stderr.readline()
if line != "":
line = line.strip()
self.emit(SIGNAL("update_error(QString)"), line)
if cmd.stdout in r:
line = cmd.stdout.readline()
if line == "":
break
line = line.strip()
self.emit(SIGNAL("update_output(QString)"), line)
except IOError:
pass
cmd.wait()
self.result = cmd.returncode
if self.result < 0:
self.error = 1
self.errorstr = "Task terminated by signal " + str(self.result)
ERROR(self.errorstr)
return
if self.result:
self.error = 1
self.errorstr = "exit code " + str(self.result)
ERROR(self.errorstr)
return
return
import select
def read_available(input_stream, max_bytes=None):
"""
Blocks until any data is available, then all available data is then read and returned.
This function returns an empty string when end of stream is reached.
Args:
input_stream: The stream to read from.
max_bytes (int|None): The maximum number of bytes to read. This function may return fewer bytes than this.
Returns:
str
"""
# Prepare local variables
input_streams = [input_stream]
empty_list = []
read_buffer = ""
# Initially block for input using 'select'
if len(select.select(input_streams, empty_list, empty_list)[0]) > 0:
# Poll read-readiness using 'select'
def select_func():
return len(select.select(input_streams, empty_list, empty_list, 0)[0]) > 0
# Create while function based on parameters
if max_bytes is not None:
def while_func():
return (len(read_buffer) < max_bytes) and select_func()
else:
while_func = select_func
while True:
# Read single byte at a time
read_data = input_stream.read(1)
if len(read_data) == 0:
# End of stream
break
# Append byte to string buffer
read_buffer += read_data
# Check if more data is available
if not while_func():
break
# Return read buffer
return read_buffer
import sys
import os
from select import select
# -------------------------------------------------------------------------
# Set the pipe (fake stdin) to simulate a final key stroke
# which will unblock the select statement
readEnd, writeEnd = os.pipe()
readFile = os.fdopen(readEnd)
writeFile = os.fdopen(writeEnd, "w")
# -------------------------------------------------------------------------
def getKey():
# Wait for stdin or pipe (fake stdin) to be ready
dr,dw,de = select([sys.__stdin__, readFile], [], [])
# If stdin is the one ready then read it and return value
if sys.__stdin__ in dr:
return sys.__stdin__.read(1) # For Windows use ----> getch() from module msvcrt
# Must finish
else:
return None
# -------------------------------------------------------------------------
def breakStdinRead():
writeFile.write(' ')
writeFile.flush()
# -------------------------------------------------------------------------
# MAIN CODE
# Get key stroke
key = getKey()
# Keyboard input
if key:
# ... do your stuff with the key value
# Faked keystroke
else:
# ... use of stdin finished
# -------------------------------------------------------------------------
# OTHER THREAD CODE
breakStdinRead()
#!/usr/bin/env python3
while True:
i = input()
if i == "quit":
break
print(f"hello {i}")
import asyncio
async def main():
proc = await asyncio.subprocess.create_subprocess_exec(
"./hello.py", stdin=asyncio.subprocess.PIPE, stdout=asyncio.subprocess.PIPE
)
proc.stdin.write(b"bob\n")
print(await proc.stdout.read(1024))
proc.stdin.write(b"alice\n")
print(await proc.stdout.read(1024))
proc.stdin.write(b"quit\n")
await proc.wait()
asyncio.run(main())
b'hello bob\n'
b'hello alice\n'
import os
import time
import subprocess
cmd = 'python3', '-c', 'import time; [(print(i), time.sleep(1)) for i in range(5)]'
p = subprocess.Popen(cmd, stdout=subprocess.PIPE)
os.set_blocking(p.stdout.fileno(), False)
start = time.time()
while True:
# first iteration always produces empty byte string in non-blocking mode
for i in range(2):
line = p.stdout.readline()
print(i, line)
time.sleep(0.5)
if time.time() > start + 5:
break
p.terminate()
1 b''
2 b'0\n'
1 b''
2 b'1\n'
1 b''
2 b'2\n'
1 b''
2 b'3\n'
1 b''
2 b'4\n'
0 b'0\n'
1 b'1\n'
0 b'2\n'
1 b'3\n'
0 b'4\n'
1 b''