C#HTTP PUT请求代码存在问题_C#_Http_Web

C#HTTP PUT请求代码存在问题

c# http web

C#HTTP PUT请求代码存在问题,c#,http,web,C#,Http,Web,我试图通过AmazonS3已经为我生成的PUT请求URL向S3发送一个文件 WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]); //PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO request.Timeout = 360000; //6 minutes request.Method = "PUT"; //result3 i

我试图通过AmazonS3已经为我生成的PUT请求URL向S3发送一个文件

WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

我的代码适用于小文件，但在发送几分钟后，在大文件（>100MB）上会出错

WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

错误为：请求已中止：请求已取消。在System.Net.ConnectStream.InternalWrite（布尔异步、字节[]缓冲区、Int32偏移量、Int32大小、异步回调、对象状态）在System.Net.ConnectStream.Write（字节[]缓冲区，Int32偏移量，Int32大小）

WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

有人能告诉我我的代码有什么问题，阻止它发送大文件吗？这不是因为Amazon PUT请求URL过期，因为我将其设置为30分钟，而问题发生在发送几分钟后

WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

代码最终在这一行代码中出现异常：

dataStream.Write（byteArray，0，byteArray.Length）
WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

再一次，它对我发送到S3的较小文件非常有用。只是不是大文件
WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

只是粗略的猜测，但你不应该：
WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

request.ContentLength = byteArray.LongLength;

而不是：
WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

request.ContentLength = byteArray.Length;

再想一想，100 MB=100*1024*1024<2^32，所以可能不会有问题
使用或比较当它工作时（第三方工具）和不工作时（您的代码）。。。一旦你知道了它们之间的区别，你就可以相应地修改你的代码了……
我会试着把它写成块，然后拆分字节数组。它可能被一大块东西噎住了
WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

大概是这样的：
WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);

        const int chunkSize = 500;
        for (int i = 0; i < byteArray.Length; i += chunkSize)
        {
            int count = i + chunkSize > byteArray.Length ? byteArray.Length - i : chunkSize;
            dataStream.Write(byteArray, i, count);
        }

const int chunkSize=500；
for（int i=0；ibyteArray.Length？byteArray.Length-i:chunkSize；
写入（字节数组，i，计数）；
}

可能需要再次检查以确保它编写了所有内容，我只对它进行了非常基本的测试。
您应该将的属性设置为更高的值。这会导致请求在完成之前超时。这可能很明显，但您确定Amazon的S3服务允许HTTP请求超过100MB吗？我认为这不是问题所在。完全100mb的数据永远不会被发送（一两分钟后就会停止）。我可以使用任何第三方S3软件程序发送文件，他们通过PUT请求发送文件，并且工作正常。我认为我的代码除了S3的问题之外还有其他问题。在上面的代码中，您的超时时间只有6分钟，而不是30分钟。我在创建S3 PUT URL时使用的超时时间是30分钟。URL链接在30分钟后过期。我的代码中的超时是连接超时，设置为6分钟。超时不是问题，因为大文件传输甚至从未达到6分钟的时间。如果您将数据流分块写入呢？在传输了一定数量的字节后，它是否总是失败？这没有任何效果。无论如何谢谢你。@fraXis结束了。将块大小更改为您认为合适的大小，例如8KB或其他大小，500字节只是一个示例。非常感谢。这就是问题所在。我假设这是一个连接超时，而不是超过时停止传输的实际超时。
WebRequest request = WebRequest.Create(PUT_URL_FINAL[0]);
//PUT_URL_FINAL IS THE PRE-SIGNED AMAZON S3 URL THAT I AM SENDING THE FILE TO

request.Timeout = 360000; //6 minutes

request.Method = "PUT";

//result3 is the filename that I am sending                                     
request.ContentType =
    MimeType(GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
             Path.DirectorySeparatorChar +
             System.Web.HttpUtility.UrlEncode(result3));

byte[] byteArray =
    File.ReadAllBytes(
        GlobalClass.AppDir + Path.DirectorySeparatorChar + "unzip" +
        Path.DirectorySeparatorChar +
        System.Web.HttpUtility.UrlEncode(result3));

request.ContentLength = byteArray.Length;
Stream dataStream = request.GetRequestStream();

// this is the line of code that it eventually quits on.  
// Works fine for small files, not for large ones
dataStream.Write(byteArray, 0, byteArray.Length); 

dataStream.Close();

//This will return "OK" if successful.
WebResponse response = request.GetResponse();
Console.WriteLine("++ HttpWebResponse: " +
                  ((HttpWebResponse)response).StatusDescription);