Linux telnet 127.0.0.1对等端不是127.0.0.1

我在我的机器上安装了CenOS 7，但可能是路由问题。 每当我使用telnet环回地址127.0.0.1时，它的对等ip总是192.168.9.91，而我预期的是127.0.0.1（例如telnet）

有人能告诉我为什么我的机器会遇到问题吗。我绝对是个网络迷。需要一些文档：）

我的机器有4个端口，2个公共端口，2个本地端口到2个单独的本地交换机

$ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: enp9s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether blabla brd ff:ff:ff:ff:ff:ff
    inet 192.168.9.91/24 brd 192.168.9.255 scope global enp9s0
       valid_lft forever preferred_lft forever
3: enp10s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether blabla brd ff:ff:ff:ff:ff:ff
    inet x.x.210.99/26 brd x.x.210.127 scope global enp10s0
       valid_lft forever preferred_lft forever
4: enp4s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether blabla brd ff:ff:ff:ff:ff:ff
    inet x.x.211.144/26 brd x.x.211.191 scope global enp4s0f0
       valid_lft forever preferred_lft forever
5: enp4s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether blabla brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.110/24 brd 192.168.10.255 scope global enp4s0f1
       valid_lft forever preferred_lft forever

$ip地址
1:lo:mtu 65536 qdisc noqueue状态未知
链接/环回00:00:00:00:00 brd 00:00:00:00:00:00:00
inet 127.0.0.1/8范围主机lo
永远有效\u lft首选\u lft永远有效
2:enp9s0:mtu 1500 qdisc pfifo_快速状态升级qlen 1000
链路/乙醚blabla brd ff:ff:ff:ff:ff:ff
inet 192.168.9.91/24 brd 192.168.9.255范围全局enp9s0
永远有效\u lft首选\u lft永远有效
3:enp10s0:mtu 1500 qdisc pfifo_快速状态升级qlen 1000
链路/乙醚blabla brd ff:ff:ff:ff:ff:ff
inet x.x.210.99/26 brd x.x.210.127范围全局enp10s0
永远有效\u lft首选\u lft永远有效
4:enp4s0f0:mtu 1500 qdisc mq状态达qlen 1000
链路/乙醚blabla brd ff:ff:ff:ff:ff:ff
inet x.x.211.144/26 brd x.x.211.191范围全局enp4s0f0
永远有效\u lft首选\u lft永远有效
5:enp4s0f1:mtu 1500 qdisc mq状态达qlen 1000
链路/乙醚blabla brd ff:ff:ff:ff:ff:ff
inet 192.168.10.110/24 brd 192.168.10.255范围全局enp4s0f1
永远有效\u lft首选\u lft永远有效

我只配置了2个公共IP，而不是2个本地IP

感谢阅读检测到的问题。 这是伪装的问题。我在我的公共区域开始化妆，这是正常的工作

如果有人知道原因，请告诉我

谢谢

$ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: enp9s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether blabla brd ff:ff:ff:ff:ff:ff
    inet 192.168.9.91/24 brd 192.168.9.255 scope global enp9s0
       valid_lft forever preferred_lft forever
3: enp10s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether blabla brd ff:ff:ff:ff:ff:ff
    inet x.x.210.99/26 brd x.x.210.127 scope global enp10s0
       valid_lft forever preferred_lft forever
4: enp4s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether blabla brd ff:ff:ff:ff:ff:ff
    inet x.x.211.144/26 brd x.x.211.191 scope global enp4s0f0
       valid_lft forever preferred_lft forever
5: enp4s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether blabla brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.110/24 brd 192.168.10.255 scope global enp4s0f1
       valid_lft forever preferred_lft forever