Wifi 使用OpenWRT和RPi创建AP，但找不到SSID
我有一个RPi，我想在其上创建一个“低用户”捕获门户。这在Raspian下工作，但由于我需要一些网络路由更改，我也在尝试OpenWRT。但是，我似乎无法得到一个干净的安装工作作为一个AP 我安装了所需的驱动程序，似乎一切正常，但我的任何设备都无法扫描SSID。有什么愚蠢的东西我不知道吗 露西说：Wifi 使用OpenWRT和RPi创建AP，但找不到SSID,wifi,raspberry-pi,openwrt,Wifi,Raspberry Pi,Openwrt,我有一个RPi，我想在其上创建一个“低用户”捕获门户。这在Raspian下工作，但由于我需要一些网络路由更改，我也在尝试OpenWRT。但是，我似乎无法得到一个干净的安装工作作为一个AP 我安装了所需的驱动程序，似乎一切正常，但我的任何设备都无法扫描SSID。有什么愚蠢的东西我不知道吗 露西说： Generic 802.11bgn Wireless Controller (radio0) Signal: 0 dBm / Noise: 0 dBm 0% SSID: Tourguide Mod
Generic 802.11bgn Wireless Controller (radio0)
Signal: 0 dBm / Noise: 0 dBm
0% SSID: Tourguide
Mode: Master
Channel: 1 (2.412 GHz)
Bitrate: ? Mbit/s
BSSID: 00:0F:55:A2:43:84
Encryption: None
br-lan Link encap:Ethernet HWaddr B8:27:EB:FF:A3:3D
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::ba27:ebff:feff:a33d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1086 errors:0 dropped:0 overruns:0 frame:0
TX packets:490 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:151856 (148.2 KiB) TX bytes:154909 (151.2 KiB)
eth0 Link encap:Ethernet HWaddr B8:27:EB:FF:A3:3D
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1512 errors:0 dropped:0 overruns:0 frame:0
TX packets:483 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:234130 (228.6 KiB) TX bytes:159395 (155.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:19 errors:0 dropped:0 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1596 (1.5 KiB) TX bytes:1596 (1.5 KiB)
wlan0 Link encap:Ethernet HWaddr 00:0F:55:A2:43:84
inet6 addr: fe80::20f:55ff:fea2:4384/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:598 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:102488 (100.0 KiB)
config wifi-device 'radio0'
option type 'mac80211'
option hwmode '11g'
option path 'platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0'
option txpower '20'
option country 'IE'
option channel 'auto'
option htmode 'HT20'
config wifi-iface
option device 'radio0'
option mode 'ap'
option ssid 'Tourguide'
option encryption 'none'
option network 'lan'
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option ifname 'eth0'
option type 'bridge'
option _orig_ifname 'eth0'
option _orig_bridge 'true'
option proto 'dhcp'
config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
config globals 'globals'
option ula_prefix 'fd02:649d:5a81::/48'
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.026459] usbcore: registered new interface driver smsc95xx
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.032531] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.238659] Core Release: 2.80a
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.241900] Setting default values for core params
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.246813] Finished setting default values for core params
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.452612] Using Buffer DMA mode
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.456011] Periodic Transfer Interrupt Enhancement - disabled
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.461962] Multiprocessor Interrupt Enhancement - disabled
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.467659] OTG VER PARAM: 0, OTG VER FLAG: 0
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.472094] Dedicated Tx FIFOs mode
Mon Jan 12 20:24:20 2015 kern.debug kernel: [ 1.475820] dwc_otg: Microframe scheduler enabled
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.475879] dwc_otg bcm2708_usb: DWC OTG Controller
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.480936] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.488334] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.493938] Init: Port Power? op_state=1
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.497956] Init: Power Port (0)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.501358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.508300] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.515643] usb usb1: Product: DWC OTG Controller
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.520458] usb usb1: Manufacturer: Linux 3.10.49 dwc_otg_hcd
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.526297] usb usb1: SerialNumber: bcm2708_usb
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.531737] hub 1-0:1.0: USB hub found
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.535603] hub 1-0:1.0: 1 port detected
Mon Jan 12 20:24:20 2015 kern.debug kernel: [ 1.540054] dwc_otg: FIQ enabled
Mon Jan 12 20:24:20 2015 kern.debug kernel: [ 1.540071] dwc_otg: NAK holdoff enabled
Mon Jan 12 20:24:20 2015 kern.debug kernel: [ 1.540080] dwc_otg: FIQ split fix enabled
Mon Jan 12 20:24:20 2015 kern.debug kernel: [ 1.540101] Module dwc_common_port init
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.540479] usbcore: registered new interface driver usb-storage
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.551094] mousedev: PS/2 mouse device common for all mice
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.561062] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.570667] cpuidle: using governor ladder
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.578814] cpuidle: using governor menu
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.586633] sdhci: Secure Digital Host Controller Interface driver
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.596845] sdhci: Copyright(c) Pierre Ossman
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.605293] sdhci: Enable low-latency mode
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.657352] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.669383] mmc0: BCM2708 SDHC host at 0x20300000 DMA 4 IRQ 20
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.679457] sdhci-pltfm: SDHCI platform and OF driver helper
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.689962] TCP: cubic registered
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.697550] NET: Registered protocol family 17
Mon Jan 12 20:24:20 2015 kern.notice kernel: [ 1.706197] Bridge firewalling registered
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.714358] 8021q: 802.1Q VLAN Support v1.8
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.723019] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.738577] Waiting for root device /dev/mmcblk0p2...
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.748207] Indeed it is in host mode hprt0 = 00021501
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 1.937372] usb 1-1: new high-speed USB device number 2 using dwc_otg
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 1.948262] Indeed it is in host mode hprt0 = 00001101
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.158116] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.169279] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.182005] hub 1-1:1.0: USB hub found
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.190368] hub 1-1:1.0: 5 ports detected
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.477629] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 2.512653] mmc0: SD Status: Invalid Allocation Unit size.
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.523567] mmc0: new SD card at address cb78
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.532770] mmcblk0: mmc0:cb78 SD01G 982 MiB
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.543469] mmcblk0: p1 p2
Mon Jan 12 20:24:20 2015 kern.warn kernel: [ 2.579438] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.593425] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.604715] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.619416] smsc95xx v1.0.4
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.695886] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ff:a3:3d
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.755734] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.767971] VFS: Mounted root (ext4 filesystem) on device 179:2.
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.778930] Freeing unused kernel memory: 104K (c03b2000 - c03cc000)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.790344] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.931396] usb 1-1.2: New USB device found, idVendor=040b, idProduct=2000
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.943105] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.954927] usb 1-1.2: Product: USB Keyboard
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 2.963726] usb 1-1.2: Manufacturer: Generic
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 3.067621] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 3.195648] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5370
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 3.207152] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 3.219095] usb 1-1.3: Product: 802.11 n WLAN
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 3.228017] usb 1-1.3: Manufacturer: Ralink
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 3.236518] usb 1-1.3: SerialNumber: 1.0
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 7.531332] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.778628] NET: Registered protocol family 10
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.821037] nf_conntrack version 0.5.0 (7038 buckets, 28152 max)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.837174] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.861511] hidraw: raw HID events driver (C) Jiri Kosina
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.893587] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.906101] Backport generated by backports.git backports-20140320-37-g5c33da0
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.923004] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.961981] input: Generic USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 9.977860] hid-generic 0003:040B:2000.0001: input,hidraw0: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-bcm2708_usb-1.2/input0
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.011831] input: Generic USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.049805] hid-generic 0003:040B:2000.0002: input,hidraw1: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-bcm2708_usb-1.2/input1
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.067108] usbcore: registered new interface driver usbhid
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.077690] usbhid: USB HID core driver
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.129623] xt_time: kernel timezone is -0000
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.155885] cfg80211: Calling CRDA to update world regulatory domain
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.190617] cfg80211: World regulatory domain updated:
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.200864] cfg80211: DFS Master region: unset
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.205359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.224593] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.237597] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.250543] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.263418] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.276332] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.289208] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.302151] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.314970] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.374924] PPP generic driver version 2.4.2
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.388804] NET: Registered protocol family 24
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.517596] usb 1-1.3: reset high-speed USB device number 5 using dwc_otg
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.638589] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.695888] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
Mon Jan 12 20:24:20 2015 kern.debug kernel: [ 10.708692] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Jan 12 20:24:20 2015 kern.info kernel: [ 10.710832] usbcore: registered new interface driver rt2800usb
Mon Jan 12 20:24:22 2015 authpriv.info dropbear[422]: Not backgrounding
Mon Jan 12 20:24:24 2015 user.emerg syslog: - init complete -
Mon Jan 12 20:24:24 2015 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Mon Jan 12 20:24:24 2015 kern.info kernel: [ 16.474564] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Mon Jan 12 20:24:24 2015 kern.info kernel: [ 16.487272] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mon Jan 12 20:24:24 2015 kern.info kernel: [ 16.501795] device eth0 entered promiscuous mode
Mon Jan 12 20:24:24 2015 kern.info kernel: [ 16.513802] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Mon Jan 12 20:24:24 2015 daemon.notice netifd: Interface 'lan' is enabled
Mon Jan 12 20:24:24 2015 daemon.notice netifd: Interface 'loopback' is enabled
Mon Jan 12 20:24:24 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Jan 12 20:24:24 2015 daemon.notice netifd: Interface 'loopback' is now up
Mon Jan 12 20:24:25 2015 daemon.notice netifd: Network device 'lo' link is up
Mon Jan 12 20:24:25 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.052676] cfg80211: Calling CRDA for country: IE
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.085261] cfg80211: Regulatory domain changed to country: IE
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.096057] cfg80211: DFS Master region: ETSI
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.100492] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.119584] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.132433] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.145262] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.157918] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
Mon Jan 12 20:24:25 2015 kern.info kernel: [ 17.170695] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Mon Jan 12 20:24:26 2015 daemon.info dnsmasq[572]: started, version 2.71 cachesize 150
Mon Jan 12 20:24:26 2015 daemon.info dnsmasq[572]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Mon Jan 12 20:24:26 2015 daemon.info dnsmasq[572]: using local addresses only for domain lan
Mon Jan 12 20:24:26 2015 daemon.warn dnsmasq[572]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Jan 12 20:24:26 2015 daemon.info dnsmasq[572]: read /etc/hosts - 1 addresses
Mon Jan 12 20:24:26 2015 kern.info kernel: [ 18.092150] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Mon Jan 12 20:24:26 2015 kern.info kernel: [ 18.123934] br-lan: port 1(eth0) entered forwarding state
Mon Jan 12 20:24:26 2015 kern.info kernel: [ 18.134427] br-lan: port 1(eth0) entered forwarding state
Mon Jan 12 20:24:26 2015 kern.info kernel: [ 18.144931] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mon Jan 12 20:24:26 2015 daemon.notice netifd: Network device 'eth0' link is up
Mon Jan 12 20:24:26 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Mon Jan 12 20:24:26 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Jan 12 20:24:26 2015 daemon.notice netifd: Interface 'lan' is setting up now
Mon Jan 12 20:24:26 2015 kern.info kernel: [ 18.173112] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Jan 12 20:24:26 2015 daemon.notice netifd: lan (596): udhcpc (v1.22.1) started
Mon Jan 12 20:24:27 2015 daemon.notice netifd: lan (596): Sending discover...
Mon Jan 12 20:24:27 2015 kern.info kernel: [ 18.596370] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
Mon Jan 12 20:24:27 2015 kern.info kernel: [ 18.613990] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
Mon Jan 12 20:24:27 2015 daemon.notice netifd: lan (596): Sending select for 192.168.0.2...
Mon Jan 12 20:24:27 2015 daemon.notice netifd: lan (596): Lease of 192.168.0.2 obtained, lease time 86400
Mon Jan 12 20:24:27 2015 kern.info kernel: [ 19.109731] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Jan 12 20:24:27 2015 kern.info kernel: [ 19.138177] device wlan0 entered promiscuous mode
Mon Jan 12 20:24:27 2015 daemon.notice netifd: Interface 'lan' is now up
Mon Jan 12 20:24:27 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[572]: exiting on receipt of SIGTERM
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[664]: started, version 2.71 cachesize 150
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[664]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[664]: using local addresses only for domain lan
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[664]: reading /tmp/resolv.conf.auto
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[664]: using local addresses only for domain lan
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[664]: using nameserver 192.168.0.1#53
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[664]: read /etc/hosts - 1 addresses
Mon Jan 12 20:24:28 2015 daemon.info dnsmasq[664]: read /tmp/hosts/dhcp - 1 addresses
Mon Jan 12 20:24:28 2015 kern.info kernel: [ 20.127335] br-lan: port 1(eth0) entered forwarding state
Mon Jan 12 20:24:37 2015 kern.info kernel: [ 28.573163] br-lan: port 2(wlan0) entered forwarding state
Mon Jan 12 20:24:37 2015 kern.info kernel: [ 28.583842] br-lan: port 2(wlan0) entered forwarding state
Mon Jan 12 20:24:37 2015 kern.info kernel: [ 28.594422] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Jan 12 20:24:37 2015 daemon.notice netifd: Network device 'wlan0' link is up
Mon Jan 12 20:24:37 2015 daemon.notice netifd: lan (596): Performing a DHCP renew
Mon Jan 12 20:24:37 2015 daemon.notice netifd: lan (596): Sending renew...
Mon Jan 12 20:24:37 2015 daemon.notice netifd: lan (596): Lease of 192.168.0.2 obtained, lease time 86400
Mon Jan 12 20:24:39 2015 kern.info kernel: [ 30.577330] br-lan: port 2(wlan0) entered forwarding state
Mon Jan 12 20:25:21 2015 authpriv.info dropbear[740]: Child connection from 192.168.0.212:55899
Mon Jan 12 20:25:55 2015 authpriv.notice dropbear[740]: Password auth succeeded for 'root' from 192.168.0.212:55899
Mon Jan 12 20:26:29 2015 daemon.warn odhcpd[390]: DHCPV6 SOLICIT IA_NA from 000300016c709fd34a7d on br-lan: no addresses available
Mon Jan 12 20:26:29 2015 daemon.info dnsmasq[664]: read /etc/hosts - 1 addresses
Mon Jan 12 20:26:29 2015 daemon.info dnsmasq[664]: read /tmp/hosts/odhcpd - 0 addresses
Mon Jan 12 20:26:29 2015 daemon.info dnsmasq[664]: read /tmp/hosts/dhcp - 1 addresses
这里也有同样的问题。RPi上的OpenWRT。 Ralink 5370，rt2800usb加载，wlan0存在，甚至在Luci中可见。但是没有SSID广播。日志中也没有明显的错误。 已尝试固件版本22、24和29。同样的结果 日志片段： 2015年1月14日星期三19:50:48 user.info系统日志：用法： modprobe模块 2015年1月14日星期三19:50:48 kern.info kernel:[18.627462]ieee80211 phy0:rt2x00lib_请求_固件：info-加载固件文件“rt2870.bin” 2015年1月14日星期三19:50:48 kern.info kernel:[18.645683]ieee80211 phy0:rt2x00lib_请求_固件：信息-检测到固件-版本：0.24 似乎modprobe试图加载某些模块，但无法加载 lsmod提供此输出（仅限于提及rt2800的模块） compat 1919 3 rt2800usb crc_ccitt 987 1 rt2800lib mac80211 353345 3 rt2800lib rt2800lib 90807 1 rt2800usb rt2800usb 14727 0 rt2x00lib 31286 3 rt2800usb rt2x00usb 7437 1 rt2800usb 看起来像一个bug或者（我希望）像OP所说的——我们都错过了一些愚蠢的东西 谢谢 傻笑 编辑： 显然，寻找解决方案毫无意义。唯一的方法是重新编译。
请看这里：好的，很高兴知道。我回到了拉斯潘，在那里得到了一个可以接受的解决方案，所以我可能会暂时坚持下去。