Ios 螺旋图三维混合器裂纹

我有一个使用此设置播放和录制音频的曲线图：

RemoteIO      ->                                 -> RemoteIO
                  Mulichannel Mixer -> 3D Mixer 
Read Callback ->                                 -> Write Callback

我的问题是我录制的声音有裂纹。没有3D混音器 声音很好。但我需要他调整后防线的速度

音频格式：

    memset(&_audioFormat, 0, sizeof(_audioFormat));
size_t bytesPerSample = sizeof (UInt16);
_audioFormat.mFormatID          = kAudioFormatLinearPCM;
_audioFormat.mFormatFlags       = kAudioFormatFlagsCanonical;
_audioFormat.mBytesPerPacket    = bytesPerSample;
_audioFormat.mFramesPerPacket   = 1;
_audioFormat.mBytesPerFrame     = bytesPerSample;
_audioFormat.mChannelsPerFrame  = 1;
_audioFormat.mBitsPerChannel    = 8 * bytesPerSample;
_audioFormat.mSampleRate        = 22100.0f;

我不知道为什么3D混音器会添加裂纹-- 以下是一个小样本音频：

希望这些信息足以找到解决方案。 谢谢：）

一些附加信息：

噼啪作响

    AudioUnitGraph 0x7F8000:
  Member Nodes:
    node 1: 'auou' 'rioc' 'appl', instance 0x1cd66d40 O I
    node 2: 'aumx' 'mcmx' 'appl', instance 0x1e055b40 O I
    node 3: 'aumx' '3dem' 'appl', instance 0x1e05e7a0 O I
  Connections:
    node   1 bus   1 => node   2 bus   1  [ 1 ch,  22000 Hz, 'lpcm' (0x0000000C) 16-bit little-endian signed integer]
    node   2 bus   0 => node   3 bus   0  [ 1 ch,  22000 Hz, 'lpcm' (0x0000000C) 16-bit little-endian signed integer]
    node   3 bus   0 => node   1 bus   0  [ 2 ch,  44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved]
  Input Callbacks:
    {0x12d9c1, 0x1cd65f30} => node   2 bus   0  [1 ch, 22000 Hz]
  CurrentState:
    mLastUpdateError=0, eventsToProcess=F, isRunning=F

无裂纹

    AudioUnitGraph 0x7E7000:
  Member Nodes:
    node 1: 'auou' 'rioc' 'appl', instance 0x1e888810 O I
    node 2: 'aumx' 'mcmx' 'appl', instance 0x1e88a0e0 O I
    node 3: 'aumx' '3dem' 'appl', instance 0x1e88b200 O  
  Connections:
    node   1 bus   1 => node   2 bus   1  [ 1 ch,  22000 Hz, 'lpcm' (0x0000000C) 16-bit little-endian signed integer]
    node   2 bus   0 => node   1 bus   0  [ 1 ch,  22000 Hz, 'lpcm' (0x0000000C) 16-bit little-endian signed integer]
  Input Callbacks:
    {0x1469b9, 0x1d5bffa0} => node   2 bus   0  [1 ch, 22000 Hz]
  CurrentState:
    mLastUpdateError=0, eventsToProcess=F, isRunning=F

更新：

我认为这个问题只有在听力记录重新启动后才会出现

1.) CheckError(AUGraphStart(self.graph), "Error starting graph. - error code");
2.) Recording <- NO CRACKLE!
3.) CheckError(AUGraphStop(self.graph), "Error stopping graph. - error code");
4.) CheckError(AUGraphStart(self.graph), "Error starting graph. - error code");
5.) Recording <- CRACKLE!

1.）检查错误（AUGraphStart（self.graph），“错误启动图-错误代码”）；
2.）记录我找到了解决办法，但没有找到解决办法。
只需将3DMixer更换为kAudioUnitSubType_Varispeed AU即可

speedDescription.componentFlags = 0;
speedDescription.componentFlagsMask = 0;
speedDescription.componentType = kAudioUnitType_FormatConverter;
speedDescription.componentSubType = kAudioUnitSubType_Varispeed;
speedDescription.componentManufacturer = kAudioUnitManufacturer_Apple;

我希望这对别人有帮助